Export limit exceeded: 21298 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (21298 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-42168 | 2026-07-22 | 9.1 Critical | ||
| django-pyas2 through 1.2.3 is vulnerable to OS command injection via the cmd_receive and cmd_send fields on the Partner model. These fields are passed directly to os.system() in pyas2/utils.py without sanitization, allowing an authenticated admin user to execute arbitrary commands on the server when an AS2 message is received or sent. | ||||
| CVE-2026-10678 | 1 Zephyrproject | 1 Zephyr | 2026-07-22 | 8.1 High |
| The MCTP-over-I2C+GPIO target binding in Zephyr (subsys/pmci/mctp/mctp_i2c_gpio_target.c) processes pseudo-register writes from an I2C bus master byte-by-byte in mctp_i2c_gpio_target_write_received() without validating the order or the receive buffer. In the affected versions the MCTP_I2C_GPIO_RX_MSG_ADDR (data) handler dereferences and writes through b->rx_pkt without checking that the receive buffer was allocated: a controller that selects the data register and writes a byte without first sending the length register (which is what allocates the buffer) causes a write of an attacker-chosen byte through a NULL/unallocated mctp_pktbuf pointer (i.e. into a small attacker-advanceable offset above address 0), producing memory corruption or a hard fault. The same handler also performs a write-then-check bounds test, allowing a one-byte heap overflow at data[255] when more than 255 data bytes are sent. Because the I2C target callback is invoked with raw bytes supplied by whatever device is the bus master and the binding performs no authentication, a malicious or malfunctioning controller on the bus can trigger these without any prior protocol state, leading to memory corruption and/or denial of service on the target device. The vulnerable code was introduced when the I2C+GPIO target binding was added and shipped in Zephyr v4.3.0 and v4.4.0. The fix defers allocation to the first data byte with a NULL check, treats a missing length as a zero-sized packet rejected by libmctp, and moves the bounds check before the store. | ||||
| CVE-2026-64881 | 2026-07-22 | 8.8 High | ||
| The audit file upload handler does not sanitize filenames, allowing shell metacharacters to flow into system command execution. This input validation failure enables command injection when chained with a related vulnerability. | ||||
| CVE-2026-8985 | 2026-07-22 | N/A | ||
| Autel Maxi Charger Single firmware through V1.03.51 is vulnerable to OS command injection in the /test endpoint exposed on TCP port 9002. An unauthenticated attacker can supply crafted input in the url parameter to execute arbitrary operating system commands. | ||||
| CVE-2026-8986 | 2026-07-22 | N/A | ||
| Autel Maxi Charger Single firmware through V1.03.51 is vulnerable to OS command injection when processing OCPP GetDiagnostics requests. A malicious or compromised OCPP server can supply a crafted diagnostics URL that results in arbitrary command execution on the charging station. | ||||
| CVE-2026-59146 | 2026-07-22 | 7.8 High | ||
| Data::SpatialHash::Shared versions before 0.02 for Perl allow out-of-bounds reads and writes via unvalidated bucket, link and free-list indices in sph_walk_cell and sph_alloc_slot. The attach-time validator sph_validate_header checks the header scalars and region layout against the file size, but does not validate the array contents it then trusts. sph_walk_cell reads entries[buckets[b]] and follows each entry's next link raw, and sph_alloc_slot writes through a file-stored free_head index, none bounded against the entry count (max_entries). A local peer that can write the backing file can leave the header valid while poisoning the bucket chain and free list, so a query reads through an out-of-bounds bucket and next index and an insert writes through an out-of-bounds free-list head, corrupting memory or crashing the process. | ||||
| CVE-2026-14881 | 2026-07-22 | 7.8 High | ||
| When importing connections in Compass it is possible to override some connection options that are otherwise can't be changed via connection form. In particular it is possible to provide a custom browser open command for OIDC auth flow that is usually can be set only globally via Compass settings. | ||||
| CVE-2026-16367 | 1 Mozilla | 1 Firefox | 2026-07-22 | 10 Critical |
| Sandbox escape due to invalid pointer in the Disability Access APIs component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. | ||||
| CVE-2025-71395 | 2026-07-22 | N/A | ||
| SurrealDB versions before 2.2.2 contain a memory exhaustion vulnerability in the string::replace function that fails to restrict resulting string length when using regex patterns. An authenticated attacker can craft a malicious query to exhaust server memory through unbounded string allocations, causing denial of service. | ||||
| CVE-2026-59844 | 1 Redhat | 2 Enterprise Linux, Hummingbird | 2026-07-22 | 6.5 Medium |
| A flaw was found in libssh. A remote authenticated client can issue SSH_FXP_READ requests with an arbitrarily large length, causing a libssh SFTP server to allocate excessive memory and potentially exhaust it through repeated requests. | ||||
| CVE-2026-44191 | 1 Redhat | 1 Ansible Automation Platform | 2026-07-22 | 7.8 High |
| A flaw was found in the Visual Studio Code Ansible Lightspeed extension. This command injection vulnerability (CWE-78) arises from improper handling of the ansible.executionEnvironment.containerOptions and ansible.executionEnvironment.volumeMounts settings, allowing an attacker to inject shell separators. This can be triggered automatically during Language Server initialization or manually when executing a playbook. Successful exploitation leads to remote code execution (RCE) on the victim's machine with the privileges of the Visual Studio Code user, potentially resulting in a complete system compromise. | ||||
| CVE-2026-63898 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: mct_u232: fix memory corruption with small endpoint The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. | ||||
| CVE-2026-63908 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. | ||||
| CVE-2026-63916 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix OOB write in wacom_hid_set_device_mode() wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing. | ||||
| CVE-2026-63939 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role. | ||||
| CVE-2026-63967 | 1 Linux | 1 Linux Kernel | 2026-07-22 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer The tagged FIFO path declares iio_buff on the stack with __aligned(8) but no initializer, but there is a hole in the structure, which will then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be copied, but the space between that and the timestamp are not initialized. Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan, but for the tagged path it only added the alignment qualifier and not the initializer :( Fix this by just zero-initializing the structure on the stack. | ||||
| CVE-2026-64878 | 2026-07-22 | 9.9 Critical | ||
| Unvalidated input in asset filter parameters allows shell metacharacters to escape command argument handling, resulting in remote code execution as a low-privileged OS user via the Analysis REST endpoint. | ||||
| CVE-2026-64879 | 2026-07-22 | 9.9 Critical | ||
| A filename supplied during file upload is not properly sanitized before being used in system command execution, allowing an attacker to inject shell metacharacters and achieve command injection via the audit file upload functionality. | ||||
| CVE-2026-65315 | 2026-07-22 | 7.5 High | ||
| Ollama (HEAD f0078ae) contains an uncontrolled memory allocation vulnerability in the GGUF metadata parser that allows remote attackers to crash the server by supplying a crafted GGUF file with attacker-controlled length and count fields in string lengths, tensor dimension counts, and metadata array counts that are used as allocation sizes without validation against remaining file size. Attackers can upload a sub-1KB crafted GGUF file via the blob upload and model create or pull API endpoints to trigger unrecoverable Go runtime out-of-memory fatal errors or makeslice panics that bypass recovery middleware and crash the entire server process. | ||||
| CVE-2026-63987 | 1 Linux | 1 Linux Kernel | 2026-07-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION nest list with an index 'i' and writes new_profile[i++] without bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES entries (5), but the Netlink nest count is entirely user-controlled. Netlink policies do not have support for constraining the number of nested entries (or number of multi-attr entries). | ||||