| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Contiki-NG's LwM2M TLV parser lwm2m_tlv_read() in os/services/lwm2m/lwm2m-tlv.c ignores its caller-supplied buffer length argument and reads up to six bytes from the input buffer with no bounds check. The caller in lwm2m-engine.c iterates while there is at least one byte remaining, so a crafted CoAP WRITE to any LwM2M endpoint whose final TLV supplies exactly one byte triggers up to five out-of-bounds reads of heap memory adjacent to the CoAP input buffer, disclosing memory contents (including key material and peer addresses) through the parsed tlv->id, tlv->length, and tlv->value fields. Corrupted tlv_len derived from the out-of-bounds memory further corrupts the caller's parse offset. In LwM2M NoSec mode, the default for constrained devices, no authentication is required. |
| Contiki-NG's DNS/mDNS resolver skip_name() in os/services/resolv/resolv.c walks DNS wire-format name labels with no packet-boundary check, and the caller in newdata() invokes it in a loop iterating nquestions times from the attacker-controlled DNS header before validating the transaction ID. An attacker who sets nquestions higher than the number of complete questions present causes skip_name() to walk past the UDP packet buffer, and the returned pointer is cast to struct dns_answer * for further memory reads. On builds with RESOLV_CONF_SUPPORTS_MDNS enabled, any peer on the local segment can trigger the read unauthenticated via a multicast UDP 5353 packet with no outstanding query required; on standard DNS builds an attacker who can inject a UDP response from port 53 during an outstanding query can trigger the same read. Impact is out-of-bounds read of uip_buf and adjacent memory, disclosing memory contents or crashing the resolver. |
| Contiki-NG's MQTT client parse_publish_vhdr() in os/net/app-layer/mqtt/mqtt.c sets topic_len_received=1 before checking topic_len against the 64-byte limit, so an over-length topic returns early but leaves the flag set. On the next TCP segment, tcp_input() re-invokes the parser with topic_received==0, and the persisted topic_len_received==1 skips the length-reading block containing the guard, falling through directly to a memcpy() that uses the unvalidated 16-bit topic_len as the copy length. The 65-byte topic[] destination overruns into adjacent struct fields including the payload_chunk pointer, which subsequent MQTT code dereferences, giving a compromised or attacker-controlled broker an arbitrary-pointer-write primitive. Contiki-NG's MQTT implementation has no TLS support so the connection is plaintext. Impact ranges from information disclosure and denial of service to remote code execution on embedded targets without memory protection. |
| An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. DTLS servers allow remote attackers to reuse the same epoch number within two times the TCP maximum segment lifetime, which is prohibited in RFC6347. This vulnerability allows remote attackers to obtain sensitive application (data of connected clients). |
| An assertion failure discovered in in check_certificate_request() in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers to cause a denial of service. |
| Buffer over-read vulnerability in Contiki-NG tinyDTLS through master branch 53a0d97 allows attackers obtain sensitive information via crafted input to dtls_ccm_decrypt_message(). |
| An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. An infinite loop bug exists during the handling of a ClientHello handshake message. This bug allows remote attackers to cause a denial of service by sending a malformed ClientHello handshake message with an odd length of cipher suites, which triggers an infinite loop (consuming all resources) and a buffer over-read that can disclose sensitive information. |
| An issue was discovered in Contiki-NG tinyDTLS through 2018-08-30. One incorrect handshake could complete with different epoch numbers in the packets Client_Hello, Client_key_exchange, and Change_cipher_spec, which may cause denial of service. |
| An issue was discovered in Contiki-NG tinyDTLS through master branch 53a0d97. DTLS servers mishandle the early use of a large epoch number. This vulnerability allows remote attackers to cause a denial of service and false-positive packet drops. |
| Buffer over-read vulnerability in the dtls_sha256_update function in Contiki-NG tinyDTLS through master branch 53a0d97 allows remote attackers to cause a denial of service via crafted data packet. |
| Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An attacker can trigger out-of-bounds reads in the RPL-Lite implementation of the RPL protocol in the Contiki-NG operating system. This vulnerability is caused by insufficient control of the lengths for DIO and DAO messages, in particular when they contain RPL sub-option headers. The problem has been patched in Contiki-NG 4.9. Users are advised to upgrade. Users unable to upgrade should manually apply the code changes in PR #2484. |
| Contiki-NG is an open-source, cross-platform operating system for IoT devices. In affected versions it is possible to cause a buffer overflow when copying an IPv6 address prefix in the RPL-Classic implementation in Contiki-NG. In order to trigger the vulnerability, the Contiki-NG system must have joined an RPL DODAG. After that, an attacker can send a DAO packet with a Target option that contains a prefix length larger than 128 bits. The problem was fixed after the release of Contiki-NG 4.7. Users unable to upgrade may apply the patch in Contiki-NG PR #1615. |
| Contiki-NG is an open-source, cross-platform operating system for IoT devices. Because of insufficient validation of IPv6 neighbor discovery options in Contiki-NG, attackers can send neighbor solicitation packets that trigger an out-of-bounds read. The problem exists in the module os/net/ipv6/uip-nd6.c, where memory read operations from the main packet buffer, <code>uip_buf</code>, are not checked if they go out of bounds. In particular, this problem can occur when attempting to read the 2-byte option header and the Source Link-Layer Address Option (SLLAO). This attack requires ipv6 be enabled for the network. The problem has been patched in the develop branch of Contiki-NG. The upcoming 4.8 release of Contiki-NG will include the patch.Users unable to upgrade may apply the patch in Contiki-NG PR #1654. |
| Contiki-NG is an open-source, cross-platform operating system for IoT devices. In the RPL-Classic routing protocol implementation in the Contiki-NG operating system, an incoming DODAG Information Option (DIO) control message can contain a prefix information option with a length parameter. The value of the length parameter is not validated, however, and it is possible to cause a buffer overflow when copying the prefix in the set_ip_from_prefix function. This vulnerability affects anyone running a Contiki-NG version prior to 4.7 that can receive RPL DIO messages from external parties. To obtain a patched version, users should upgrade to Contiki-NG 4.7 or later. There are no workarounds for this issue. |
| Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The low-power IPv6 network stack of Contiki-NG has a buffer module (os/net/ipv6/uipbuf.c) that processes IPv6 extension headers in incoming data packets. As part of this processing, the function uipbuf_get_next_header casts a pointer to a uip_ext_hdr structure into the packet buffer at different offsets where extension headers are expected to be found, and then reads from this structure. Because of a lack of bounds checking, the casting can be done so that the structure extends beyond the packet's end. Hence, with a carefully crafted packet, it is possible to cause the Contiki-NG system to read data outside the packet buffer. A patch that fixes the vulnerability is included in Contiki-NG 4.8. |
| Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in Contiki-NG may cast a UDP header structure at a certain offset in a packet buffer. The code does not check whether the packet buffer is large enough to fit a full UDP header structure from the offset where the casting is made. Hence, it is possible to cause an out-of-bounds read beyond the packet buffer. The problem affects anyone running devices with Contiki-NG versions previous to 4.8, and which may receive 6LoWPAN packets from external parties. The problem has been patched in Contiki-NG version 4.8. |
| Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in the Contiki-NG operating system (file os/net/ipv6/sicslowpan.c) contains an input function that processes incoming packets and copies them into a packet buffer. Because of a missing length check in the input function, it is possible to write outside the packet buffer's boundary. The vulnerability can be exploited by anyone who has the possibility to send 6LoWPAN packets to a Contiki-NG system. In particular, the vulnerability is exposed when sending either of two types of 6LoWPAN packets: an unfragmented packet or the first fragment of a fragmented packet. If the packet is sufficiently large, a subsequent memory copy will cause an out-of-bounds write with data supplied by the attacker. |
| Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 are vulnerable to an Out-of-bounds read. While processing the L2CAP protocol, the Bluetooth Low Energy stack of Contiki-NG needs to map an incoming channel ID to its metadata structure. While looking up the corresponding channel structure in get_channel_for_cid (in os/net/mac/ble/ble-l2cap.c), a bounds check is performed on the incoming channel ID, which is meant to ensure that the channel ID does not exceed the maximum number of supported channels.However, an integer truncation issue leads to only the lowest byte of the channel ID to be checked, which leads to an incomplete out-of-bounds check. A crafted channel ID leads to out-of-bounds memory to be read and written with attacker-controlled data. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. As a workaround, Users can apply the patch in Contiki-NG pull request 2081 on GitHub. |
| Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 contain a NULL Pointer Dereference in BLE L2CAP module. The Contiki-NG operating system for IoT devices contains a Bluetooth Low Energy stack. An attacker can inject a packet in this stack, which causes the implementation to dereference a NULL pointer and triggers undefined behavior. More specifically, while processing the L2CAP protocol, the implementation maps an incoming channel ID to its metadata structure. In this structure, state information regarding credits is managed through calls to the function input_l2cap_credit in the module os/net/mac/ble/ble-l2cap.c. Unfortunately, the input_l2cap_credit function does not check that the metadata corresponding to the user-supplied channel ID actually exists, which can lead to the channel variable being set to NULL before a pointer dereferencing operation is performed. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. Users can apply the patch in Contiki-NG pull request #2253 as a workaround until the new package is released. |
| Contiki-NG is an open-source, cross-platform operating system for IoT devices. The Contiki-NG operating system processes source routing headers (SRH) in its two alternative RPL protocol implementations. The IPv6 implementation uses the results of this processing to determine whether an incoming packet should be forwarded to another host. Because of missing validation of the resulting next-hop address, an uncontrolled recursion may occur in the tcpip_ipv6_output function in the os/net/ipv6/tcpip.c module when receiving a packet with a next-hop address that is a local address. Attackers that have the possibility to send IPv6 packets to the Contiki-NG host can therefore trigger deeply nested recursive calls, which can cause a stack overflow. The vulnerability has not been patched in the current release of Contiki-NG, but is expected to be patched in the next release. The problem can be fixed by applying the patch in Contiki-NG pull request #2264. Users are advised to either apply the patch manually or to wait for the next release. There are no known workarounds for this vulnerability. |
