| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Consul Community Edition and Consul Enterprise 1.19.1 through 2.0.2 did not enforce the {{session:write}} ACL permission for session deletion operations submitted through the transaction API. An authenticated caller with network access to the Consul server RPC port could delete arbitrary sessions without holding the required permission. This vulnerability, CVE-2026-19016, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.20.1 through 2.0.2 are vulnerable to an L7 intention authorization bypass when a service proxy is configured with a custom public listener. An authenticated mesh workload may reach HTTP paths that are blocked by a path-based deny intention. This vulnerability, CVE-2026-15970, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer destroy_previous_session() until after NTLM authentication
In ntlm_authenticate(), destroy_previous_session() is called using a
user pointer resolved from the client-supplied NTLM blob username field
before the NTLMv2 response is validated. An authenticated attacker can
set the NTLM blob username to match a victim account and set
PreviousSessionId to the victim's session ID; destroy_previous_session()
destroys the victim's session while ksmbd_decode_ntlmssp_auth_blob()
subsequently rejects the request with -EPERM.
Move destroy_previous_session() and the prev_id assignment to after
ksmbd_decode_ntlmssp_auth_blob() returns success and use sess->user
rather than the pre-authentication lookup result. This matches the
ordering already used by krb5_authenticate(), where
destroy_previous_session() is called only after
ksmbd_krb5_authenticate() returns success. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP Call Trace during PTP release
If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then
ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will
result in the following PTP release call trace during driver unload:
kernel BUG at lib/list_debug.c:52!
ice_ptp_release+0x332/0x3c0 [ice]
ice_deinit_features.part.0+0x10e/0x120 [ice]
ice_remove+0x100/0x220 [ice]
This was observed when passing PF1 through to a VM. ice_ptp_init()
fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT.
Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and
returning without error, preventing the invalid state transition to
ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from
ICE_PTP_RESETTING after a failed rebuild. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures. |
| A flaw was found in StackRox/RHACS Central's Auth Machine-to-Machine (M2M) token exchange. When an administrator configures M2M role mappings, the system uses unanchored regular expressions for matching claim values. This allows an attacker with a valid OpenID Connect (OIDC) token, whose claim value is a superstring of a configured pattern, to gain unauthorized access to roles they were not intended to receive. This can lead to privilege escalation within the system. |
| Authorization Bypass Through User-Controlled Key in the contact management component in Roskus Prospero Flow CRM before 5.4.8 allows authenticated users of any company to blindly overwrite the contact data of another company and to download that contact's personal data as a vCard via the contact's numeric identifier, because the save and export operations retrieve the record without constraining the query to the authenticated user's company. |
| Missing Authorization in the permission management component in Roskus Prospero Flow CRM before 5.2.1 allows any authenticated user to grant any role, including their own, the complete set of application permissions via a crafted POST request to the permission save endpoint, which performs no authorization check before synchronizing the submitted permissions to the specified role. |
| Microsoft Office Remote Code Execution Vulnerability |
| Windows Key Storage Provider Security Feature Bypass Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug
If a vCPU stays scheduled out (or blocked) while the last pCPU it ran
on goes through a hotplug cycle (online->offline->online), and the vCPU
then resumes execution on the same pCPU, then it is possible for it to
run with an ASID that has now been assigned to a different vCPU,
resulting in stale TLB translations being used.
svm_enable_virtualization_cpu() resets asid_generation to 1 and sets
next_asid to max_asid + 1 on every CPU online event, including hotplug
cycles. Because next_asid starts beyond the pool boundary, the first
call to new_asid() after an online event always wraps the pool,
incrementing asid_generation to 2 and assigning ASIDs starting from
min_asid.
Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding
asid_generation=2 and ASID=N from before the hotplug event:
1. CPU-X goes offline and back online: asid_generation resets to 1,
next_asid = max_asid + 1.
2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping
the pool and consuming ASIDs starting from min_asid. Eventually
vCPU-B from a different VM is assigned asid_generation=2, ASID=N
— the same ASID that vCPU-A held before the hotplug.
3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is
unchanged so the migration branch is skipped. Its saved
asid_generation=2 matches sd->asid_generation=2, so the generation
check silently passes and vCPU-A continues running with ASID=N —
the same ASID just freshly assigned to vCPU-B.
Both vCPUs from different VMs now run on CPU-X with the same ASID,
causing them to share NPT TLB entries and producing stale translations.
The collision manifests as a KVM internal error (Suberror: 1, emulation
failure). The NPT page fault reports a faulting GPA far outside the
VM's physical memory range — a sign of stale TLB translations being
used. KVM falls back to instruction emulation, which fails on
FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not
implement.
Fix this by incrementing asid_generation instead of resetting it to 1
in svm_enable_virtualization_cpu(). On module load, asid_generation
starts at 0 (memset) and the increment produces 1, identical to the
old behaviour. On subsequent hotplug cycles the generation advances
beyond any value a vCPU previously observed on this CPU, so the
generation check in pre_svm_run() reliably forces new_asid() on every
vCPU after every hotplug cycle. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, XhtmlParser.java imposes no maximum element nesting depth, so a deeply nested text.div narrative triggers unbounded recursion between parseElementInner() and parseElement(), raising a StackOverflowError. An attacker who can submit FHIR resources containing such narratives can thus crash a parsing or validation worker thread, affecting validator services and any application that parses attacker-supplied FHIR JSON or XML. This issue is fixed in version 6.9.11. |
| An improper authorization vulnerability in fosrl/pangolin through v1.20.0 allows an authenticated remote attacker to authenticate to any resource in any organization by reusing an access token issued for a different resource. |
| URL Redirection to Untrusted Site ('Open Redirect') vulnerability in phoenixframework phoenix_live_view allows an attacker to send a victim's browser to an origin of the attacker's choosing via a :to value containing ASCII tab, LF or CR.
redirect/2 validates :to through the private validate_local_url!/2 in lib/phoenix_live_view.ex, which is intended to guarantee the target is a path within the application. It rejects a leading // and any backslash, but not ASCII tab, LF or CR. Browsers strip those three characters before parsing a URL, so a value such as /<TAB>/example.com passes validation as a path and is then resolved as the scheme-relative URL //example.com. The live navigation functions share the guard but are not affected, because the client expands their target against the current origin. push_patch/2 is also affected before 0.7.0, which is when that expansion was added.
This issue affects phoenix_live_view: from 0.5.0 before 1.0.19, from 1.1.0-rc.0 before 1.1.33, and from 1.2.0-rc.0 before 1.2.9. |
| The Easy Appointments WordPress plugin before 3.12.28 does not verify that the appointment targeted by its customer-data update action belongs to the current user; the action only checks a shared nonce that any authenticated user can obtain from their own appointment's edit form. A subscriber-level user with an appointment of their own can therefore reuse that nonce to overwrite the customer metadata (email, name, phone, description) of another user's appointment. Because the Easy Appointments WordPress plugin before 3.12.28 then treats that metadata as the appointment's contact data, a subsequent administrator status change with customer notifications enabled delivers the victim's appointment notification to the attacker-controlled email address. |
| The Easy Appointments WordPress plugin before 3.12.28 does not verify ownership or capability when returning stored customer details, allowing users with subscriber-level access to read any customer's personal information by iterating an identifier. |
| Frappe is a full-stack web application framework. Prior to 16.20.0 and 15.112.0, unrestricted access to a Document Follow API (update_follow) is possible for an authenticated user.
This issue is fixed in versions 16.20.0 and 15.112.0. |
| Akaunting's shared download route (app/Http/Controllers/Common/Uploads.php::download, reachable at uploads/{id}/download behind only generic auth middleware) fetched the requested Media record by ID with no verification that it belonged to the requesting portal customer's own company, allowing any authenticated portal customer to download any other company's uploaded files by guessing or enumerating media IDs. |
| Crater's NotePolicy checks only a blanket Bouncer ability (manage-all-notes / view-all-notes) with no company-ownership comparison, unlike InvoicePolicy and other sibling policies which additionally verify ->hasCompany(->company_id). Any authenticated user of one company can read, edit, or delete another company's notes by ID. |
