Export limit exceeded: 22411 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22411 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64586 | 1 Linux | 1 Linux Kernel | 2026-08-09 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: drain bus_reset work on device removal brcmf_fw_crashed() and the debugfs "reset" entry both schedule drvr->bus_reset, whose callback recovers drvr through container_of() and dereferences it. The removal path frees drvr (brcmf_free -> wiphy_free) without draining the work, so a bus_reset callback pending or running during removal can outlive drvr. Cancellation cannot live in brcmf_detach() or brcmf_free(): the work callback reaches teardown through the bus .reset op (PCIe brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset -> brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for the running work and deadlock. Add a per-bus mutex (bus_reset_lock) and route all arming through brcmf_bus_schedule_reset(), which under the lock skips when the bus is marked removing. Each bus remove entry calls brcmf_bus_cancel_reset_work(), which under the same lock sets removing and cancels the work. Holding the mutex across cancel_work_sync() makes the set-removing + drain step atomic. Every producer reaches the arming path from process context -- the PCIe firmware-halt notification runs in the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail path runs from the data workqueue -- so the mutex is taken only in sleepable contexts. Where applicable the remove entry first stops the firmware-crash producer: on PCIe mask the mailbox and synchronize_irq; on SDIO unregister the bus interrupt and cancel the data worker, which also reports firmware halts through brcmf_fw_crashed(). The mutex is initialized at bus allocation. The SDIO suspend power-off path frees drvr through the same brcmf_sdiod_remove() and takes the same lock; resume re-allows the work only on a successful re-probe. Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire before brcmf_attach() wires up drvr, and it dereferences drvr (bphy_err/brcmf_dev_coredump) before reaching the arming gate. The bus_reset work is shared across buses, so the drain is applied to every remove path: PCIe (the .reset op introduced by the Fixes commit), SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the debugfs "reset" entry). cancel_work_sync() drains a running or pending bus_reset work item before removal frees drvr, and patch 1/2 makes the scratch-buffer release safe when reset teardown has already released those DMA buffers. This patch fixes the lifetime of the bus_reset work item itself. It does not attempt to address the separate, pre-existing lifetime of the asynchronous firmware completion started by the PCIe reset path. That callback needs its own lifetime/ownership protocol and is being tracked separately. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-64523 | 1 Linux | 1 Linux Kernel | 2026-08-09 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Take a long-lived file reference at submit handshake_nl_accept_doit() needs the file pointer backing req->hr_sk->sk_socket to survive the window between handshake_req_next() and the subsequent FD_PREPARE() and get_file(). The submit-side sock_hold() does not provide that. sk_refcnt keeps struct sock alive, but struct socket is owned by sock->file: when the consumer fputs the last file reference, sock_release() tears the socket down regardless of any sock_hold. Add an hr_file pointer to struct handshake_req and acquire an explicit reference on sock->file during handshake_req_submit(). handshake_complete() and handshake_req_cancel() release the reference on the completion-bit-winning path. The submit error path must also release the file reference, but after rhashtable insertion a concurrent handshake_req_cancel() can discover the request and race the error path. Gate the error-path cleanup -- sk_destruct restoration, fput, and request destruction -- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same serialization handshake_complete() and handshake_req_cancel() already use. When cancel has already claimed ownership, the submit error path returns without touching the request; socket teardown handles final destruction. The accept-side dereferences are not yet retargeted; that change comes in the next patch. | ||||
| CVE-2026-63979 | 1 Linux | 1 Linux Kernel | 2026-08-09 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: hand off the pinned file reference to accept_doit handshake_req_next() removes the request from the per-net pending list and drops hn_lock before handshake_nl_accept_doit() reads req->hr_sk->sk_socket and dereferences sock->file (once in FD_PREPARE() and again in get_file()). In that window a consumer running tls_handshake_cancel() followed by sockfd_put() (svc_sock_free) or __fput_sync() (xs_reset_transport) releases sock->file. sock_release() then runs sock_orphan(), zeroing sk_socket, and frees the struct socket. The accept-side code either reads NULL through sk_socket or chases freed memory. The submit-side sock_hold() does not prevent this. sk_refcnt protects struct sock, but struct socket and sock->file are independently refcounted via the file descriptor the consumer owns. Pinning sk leaves sock and sock->file unprotected. Retarget the accept-side dereferences at req->hr_file, which was pinned at submit time, instead of req->hr_sk->sk_socket->file. Pinning on its own is not sufficient: a consumer that cancels between handshake_req_next() returning and accept_doit reaching FD_PREPARE() takes the !remove_pending() branch in handshake_req_cancel() and drops hr_file before the accept side takes its own reference. Hand off an additional file reference inside handshake_req_next(), under hn_lock, so the accept side operates on a reference that no concurrent handshake_req_cancel() can revoke. FD_PREPARE() consumes that handed-off reference, either by transferring it to the new fd in fd_publish() or by dropping it in the cleanup destructor on error; the explicit get_file() that previously balanced FD_PREPARE() is therefore redundant and goes away. Update handshake_req_cancel_test2 and _test3 to simulate the FD_PREPARE() consumption with an fput() so the kunit file-count assertions stay balanced. | ||||
| CVE-2026-63978 | 1 Linux | 1 Linux Kernel | 2026-08-09 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/handshake: Drain pending requests at net namespace exit The arguments to list_splice_init() in handshake_net_exit() are reversed. The call moves the local empty "requests" list onto hn->hn_requests, leaving the local list empty, so the subsequent drain loop runs zero iterations. Pending handshake requests that had not yet been accepted are not torn down when the net namespace is destroyed; each one keeps a reference on a socket file and on the handshake_req allocation. Pass the source and destination in the documented order (list_splice_init(list, head) moves list onto head) so the pending list is transferred to the local scratch list and drained through handshake_complete(). Fixing the splice direction exposes a list-corruption race. After the splice each req->hr_list still has non-empty link pointers, threading the stack-local scratch list rather than hn_requests. A concurrent handshake_req_cancel() -- for example, from sunrpc's TLS timeout on a kernel socket whose netns reference was not taken -- finds the request through the rhashtable, calls remove_pending(), and sees !list_empty(&req->hr_list). __remove_pending_locked() then list_del_init()s an entry off the scratch list while the drain iterates, corrupting it. The same call arriving after the drain loop has run list_del() on an entry hits LIST_POISON instead. Have remove_pending() check HANDSHAKE_F_NET_DRAINING under hn_lock and report not-found when drain is in progress. The drain has already taken ownership; handshake_complete()'s existing test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates between drain and cancel for who calls the consumer's hp_done. Use list_del_init() rather than list_del() in the drain so req->hr_list does not carry LIST_POISON after drain releases the entry. The DRAINING guard in remove_pending() makes cancel return false, but cancel still falls through to test_and_set_bit on HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference. Without another pin, if that is the last reference, sk_destruct frees the request while it is still linked on the drain loop's local list. Pin each request's hr_file under hn_lock before releasing the list, and drop that drain pin after the loop finishes with the request. | ||||
| CVE-2026-43197 | 1 Linux | 1 Linux Kernel | 2026-08-09 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netconsole: avoid OOB reads, msg is not nul-terminated msg passed to netconsole from the console subsystem is not guaranteed to be nul-terminated. Before recent commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure") the message would be placed in printk_shared_pbufs, a static global buffer, so KASAN had harder time catching OOB accesses. Now we see: printk: console [netcon_ext0] enabled BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240 Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594 CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9 Call Trace: kasan_report+0xe4/0x120 string+0x1f7/0x240 vsnprintf+0x655/0xba0 scnprintf+0xba/0x120 netconsole_write+0x3fe/0xa10 nbcon_emit_next_record+0x46e/0x860 nbcon_kthread_func+0x623/0x750 Allocated by task 1: nbcon_alloc+0x1ea/0x450 register_console+0x26b/0xe10 init_netconsole+0xbb0/0xda0 The buggy address belongs to the object at ffff88813b6d4000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 0 bytes to the right of allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00) | ||||
| CVE-2026-23385 | 1 Linux | 1 Linux Kernel | 2026-08-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clone set on flush only Syzbot with fault injection triggered a failing memory allocation with GFP_KERNEL which results in a WARN splat: iter.err WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992 Modules linked in: CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026 RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845 Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43 +80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9 RSP: 0018:ffffc900045af780 EFLAGS: 00010293 RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40 RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000 RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0 R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920 FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0 Call Trace: <TASK> __nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115 nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380 netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761 __sock_release net/socket.c:662 [inline] sock_close+0xc3/0x240 net/socket.c:1455 Restrict set clone to the flush set command in the preparation phase. Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree and pipapo backends to only clone the set when this iteration type is used. As for the existing NFT_ITER_UPDATE type, update the pipapo backend to use the existing set clone if available, otherwise use the existing set representation. After this update, there is no need to clone a set that is being deleted, this includes bound anonymous set. An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone interface and call it from the flush set path. | ||||
| CVE-2026-64599 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: amlogic - avoid double cleanup in meson_crypto_probe() When meson_allocate_chanlist() fails after a partial allocation, it already unwinds the allocated chanlist state through its local error path. meson_crypto_probe() then jump to error_flow and calls meson_free_chanlist() again, causing the same per-flow resources to be torn down twice. In the reproduced failure path, the second teardown re-entered crypto_engine_exit() on an already destroyed worker and KASAN reported a slab-use-after-free in kthread_destroy_worker(). Prevent double-free by handling partial allocation failures locally within meson_allocate_chanlist() and skipping the outer cleanup path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1, using the reproducer under tools/testing/meson_crypto_probe. The reproducer forces the second dma_alloc_attrs() call in the gxl-crypto probe path to return NULL, making meson_allocate_chanlist() fail after partial initialization. On the unpatched kernel this reliably triggered a slab-use-after-free. With this fix applied, the same reproducer no longer emits any KASAN report and the probe fails cleanly with -ENOMEM. ================================================================== BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0 Read of size 8 at addr ff1100010c057a68 by task insmod/265 CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? kthread_destroy_worker+0xb2/0xd0 ? kthread_destroy_worker+0xb2/0xd0 kasan_report+0xca/0x100 ? kthread_destroy_worker+0xb2/0xd0 kthread_destroy_worker+0xb2/0xd0 meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto] platform_probe+0x99/0x140 really_probe+0x1c6/0x6a0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x248/0x310 ? acpi_driver_match_device+0xb0/0x100 driver_probe_device+0x48/0x210 ? __pfx___device_attach_driver+0x10/0x10 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x104/0x190 ? __pfx_bus_for_each_drv+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 __device_attach+0x19d/0x3b0 ? __pfx___device_attach+0x10/0x10 ? do_raw_spin_unlock+0x53/0x220 device_initial_probe+0x78/0xa0 bus_probe_device+0x5b/0x130 device_add+0xcfd/0x1430 ? __pfx_device_add+0x10/0x10 ? insert_resource+0x34/0x50 ? lock_release+0xc9/0x290 platform_device_add+0x24e/0x590 ? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro] meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro] do_one_initcall+0xc0/0x450 ? __pfx_do_one_initcall+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 ? __create_object+0x59/0x80 ? kasan_unpoison+0x27/0x60 do_init_module+0x27b/0x7d0 ? __pfx_do_init_module+0x10/0x10 ? kasan_quarantine_put+0x84/0x1d0 ? kfree+0x32c/0x510 ? load_module+0x561e/0x5ff0 load_module+0x54fe/0x5ff0 ? __pfx_load_module+0x10/0x10 ? security_file_permission+0x20/0x40 ? kernel_read_file+0x23d/0x6e0 ? mmap_region+0x235/0x4a0 ? __pfx_kernel_read_file+0x10/0x10 ? __file_has_perm+0x2c0/0x3e0 init_module_from_file+0x158/0x180 ? __pfx_init_module_from_file+0x10/0x10 ? __lock_acquire+0x45a/0x1ba0 ? idempotent_init_module+0x315/0x610 ? lock_release+0xc9/0x290 ? lock ---truncated--- | ||||
| CVE-2026-64588 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix data races on ring->ready On weakly-ordered architectures, the store to fiq->ops can be reordered past the store to ring->ready, allowing a CPU that sees ring->ready == true via fuse_uring_ready() to dispatch requests through a stale fiq->ops pointer. Upgrade the store to smp_store_release() and the load in fuse_uring_ready() to smp_load_acquire() so that the preceding WRITE_ONCE(fiq->ops, ...) is visible to any CPU that observes ring->ready == true. Additionally, fuse_uring_do_register() publishes ring->ready with WRITE_ONCE() but the fast-path check reads it with a plain load. This is a marked-vs-unmarked access that KCSAN will flag. Wrap it in READ_ONCE() to mark it without adding unnecessary ordering. Also wrap the fc->ring load in fuse_uring_ready() in READ_ONCE() to prevent the compiler from reloading it between the NULL check and the dereference. | ||||
| CVE-2026-64587 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: arc: emac: quiesce interrupts before requesting IRQ Normal RX/TX interrupts are enabled later, in arc_emac_open(), so probe should not see interrupt delivery in the usual case. However, hardware may still present stale or latched interrupt status left by firmware or the bootloader. If probe later unwinds after devm_request_irq() has installed the handler, such a stale interrupt can still reach arc_emac_intr() during teardown and race with release of the associated net_device. Avoid that window by putting the device into a known quiescent state before requesting the IRQ: disable all EMAC interrupt sources and clear any pending EMAC interrupt status bits. This keeps the change hardware-focused and minimal, while preventing spurious IRQ delivery from leftover state. | ||||
| CVE-2026-64568 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix unsol_bcast_probe_resp double free on alloc failure ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old template before allocating the replacement. If the kzalloc() then fails, it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points at the object already queued for freeing. A later update or AP teardown re-queues that same rcu_head; the second free is caught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800d06f300 by task exploit/145 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-128 of size 128 Queue the old object for kfree_rcu() only after the new one is published, matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). | ||||
| CVE-2026-64585 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: kill anchored URBs before freeing netdevs esd_usb_disconnect() frees each CAN netdev with free_candev() inside its per-netdev loop and only calls unlink_all_urbs(dev) afterwards. The per-netdev private data (struct esd_usb_net_priv) is embedded in the net_device allocation returned by alloc_candev(), so once free_candev() has run, dev->nets[i] points to freed memory. unlink_all_urbs() then dereferences the freed dev->nets[i] to kill the per-netdev TX anchor (usb_kill_anchored_urbs(&priv->tx_submitted)), clear active_tx_jobs, and reset priv->tx_contexts[]. Reorder the teardown so the anchored URBs are killed before the netdevs are freed, matching other CAN/USB drivers in the same directory such as ems_usb, usb_8dev and mcba_usb, which unregister, then unlink, then free: unregister the netdevs first (which stops their TX queues), call unlink_all_urbs(dev) once, then free the netdevs. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-64598 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: Fix error code in smb2_aead_req_alloc() The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work. We would have to do something similar to the previous line where it's cast to int and then long. However, it's simpler to store the return in an int ret variable. This bug would eventually result in a crash when dereference the invalid error pointer. | ||||
| CVE-2026-64581 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix sk_dst_cache double-free in xfrm_user_policy() xfrm_user_policy() clears the socket dst cache with __sk_dst_reset(), i.e. the non-atomic __sk_dst_set(sk, NULL): it reads sk_dst_cache with rcu_dereference_protected(), stores NULL and dst_release()s the old dst. That is only safe if no other thread modifies sk_dst_cache concurrently. For a connected UDP socket that does not hold: the transmit fast path (udp_sendmsg -> sk_dst_check -> sk_dst_reset) resets the cache locklessly with an atomic xchg(). A per-socket policy change racing a send can make both sides observe the same old dst and each dst_release() it, dropping the socket's single reference twice and freeing the xfrm_dst bundle while it is still referenced: BUG: KASAN: slab-use-after-free in dst_release Write of size 4 at addr ffff88801897b6c0 by task exploit/155 Call Trace: ... dst_release (... ./include/linux/rcuref.h:109) xfrm_user_policy (./include/net/sock.h:2239 ./include/net/sock.h:2256 net/xfrm/xfrm_state.c:3053) do_ip_setsockopt (net/ipv4/ip_sockglue.c:1347) ip_setsockopt (net/ipv4/ip_sockglue.c:1417) do_sock_setsockopt (net/socket.c:2368) __sys_setsockopt (net/socket.c:2393) __x64_sys_setsockopt (net/socket.c:2396) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Reachable by an unprivileged user via a user+network namespace. Use the atomic sk_dst_reset() so the cache is cleared and released with a single xchg(): whichever side wins releases the dst once, the other sees NULL and does nothing. Behaviour is otherwise unchanged. | ||||
| CVE-2026-64601 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission In capture_urb_complete(), usb_anchor_urb() is called on every completion callback, but the URB is already anchored from the initial submission in tascam_trigger_start(). Each redundant call corrupts the anchor's doubly-linked list and inflates the URB refcount. When usb_kill_anchored_urbs() traverses the list during stream stop / suspend / disconnect, the corrupted list leads to use-after-free. Remove the redundant usb_anchor_urb() from the resubmit path. | ||||
| CVE-2026-64574 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: tear down new links on vif update error path When ieee80211_vif_update_links() adds new links it allocates a link container for each and calls ieee80211_link_init() (which registers the per-link debugfs files with file->private_data pointing into the container) and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails, the error path restores the old pointers and jumps to 'free', which frees the new containers but never removes their debugfs entries or stops the links. The debugfs files survive with file->private_data dangling at the freed container, so a later open()+read() (e.g. link-1/txpower) dereferences freed memory in ieee80211_if_read_link(), a use-after-free. The removal path already dismantles links correctly via ieee80211_tear_down_links(), which removes each link's keys and debugfs entries and calls ieee80211_link_stop(); the add path on the error branch does not. Commit be1ba9ed221f ("wifi: mac80211: avoid weird state in error path") hardened this same error path for the link-removal case (new_links == 0) but left the newly-added links' teardown unaddressed. drv_change_vif_links() can fail at runtime on MLO drivers (internal allocation / queue / firmware command failures). Remove the new links' debugfs entries and stop them before freeing. BUG: KASAN: slab-use-after-free in ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Read of size 8 at addr ffff888011290000 by task exploit/145 Call Trace: ... ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) short_proxy_read (fs/debugfs/file.c:373) vfs_read (fs/read_write.c:572) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a RIP: 0010:ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-64570 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix fils_discovery double free on alloc failure ieee80211_set_fils_discovery() calls kfree_rcu() on the old template before allocating the replacement. If the kzalloc() then fails, it returns -ENOMEM while link->u.ap.fils_discovery still points at the object already queued for freeing. A later update or AP teardown (ieee80211_stop_ap()) re-queues that same rcu_head; the second free is caught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800c065280 by task swapper/0/0 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-96 of size 96 Queue the old object for kfree_rcu() only after the new one is published, matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). | ||||
| CVE-2026-64566 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags() When iptfs_skb_add_frags() copies frag references from the source frag walk into a new SKB, it increments the page reference count via __skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the destination SKB's skb_shinfo->flags. If the source SKB carries shared frags (e.g. from a page-pool backed receive path), the new inner SKB will appear to ESP as having privately owned frags. A subsequent esp_input() call for a nested transport-mode SA then takes the no-COW fast path and decrypts in place, writing over pages that are still referenced by the outer IPTFS SKB. This causes kernel-visible memory corruption and can trigger a panic. All other frag-transfer helpers in the kernel (skb_try_coalesce, skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this convention by setting the flag inside the loop immediately after __skb_frag_ref() and nr_frags++, so every exit path that attaches a frag unconditionally propagates SKBFL_SHARED_FRAG. | ||||
| CVE-2026-68081 | 1 Linux | 1 Linux Kernel | 2026-08-08 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path doesn't use nested_vmx_vmexit() as that API is intended to be used if and only if L2 is active, and the open coded equivalent neglects to put the vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages (and/or mappings) if L1 retries VMLAUNCH/VMRESUME. Note, the !from_vmenter scenario doesn't suffer the same problem, as vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry getting vmcs12 pages. | ||||
| CVE-2026-19148 | 2 Google, Linux | 2 Chrome, Linux Kernel | 2026-08-08 | 8.3 High |
| Out of bounds write in GPU in Google Chrome on Linux prior to 151.0.7922.109 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2023-2235 | 2 Linux, Redhat | 4 Linux Kernel, Enterprise Linux, Rhel Eus and 1 more | 2026-08-07 | 7.8 High |
| A use-after-free vulnerability in the Linux Kernel Performance Events system can be exploited to achieve local privilege escalation. The perf_group_detach function did not check the event's siblings' attach_state before calling add_event_to_groups(), but remove_on_exec made it possible to call list_del_event() on before detaching from their group, making it possible to use a dangling pointer causing a use-after-free vulnerability. We recommend upgrading past commit fd0815f632c24878e325821943edccc7fde947a2. | ||||