Export limit exceeded: 22396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43037 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip4ip6_err() Oskar Kjos reported the following problem. ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr value. __ip_options_echo() then reads optlen from attacker-controlled packet data at sptr[rr+1] and copies that many bytes into dopt->__data, a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE). To fix this we clear skb2->cb[], as suggested by Oskar Kjos. Also add minimal IPv4 header validation (version == 4, ihl >= 5). | ||||
| CVE-2026-68359 | 1 Linux | 1 Linux Kernel | 2026-08-12 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop(). | ||||
| CVE-2026-68355 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix potential buffer underflow in ath11k_hal_rx_msdu_list_get() When the first entry in msdu_details has a zero buffer address, the code accesses msdu_details[i - 1] with i == 0, causing a buffer underflow. Fix similarly to ath12k_wifi7_hal_rx_msdu_list_get() by adding a separate check for i == 0 before the main condition to prevent the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-68411 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: clamp virtio RX length before skb_put hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by the device straight to skb_put() on a fixed-size receive skb. A backend reporting a length larger than the skb tailroom drives skb_put() past the buffer end and hits skb_over_panic() -- a host-triggerable guest panic (denial of service). Clamp the length to the skb's available room before skb_put(). A conforming device never reports more than the posted buffer size, so valid frames are unaffected; a truncated over-report then fails the length/header checks in hwsim_virtio_handle_cmd() and is dropped, so truncating rather than dropping here cannot be turned into a parsing problem. | ||||
| CVE-2026-53233 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netdev: fix double-free in netdev_nl_bind_rx_doit() Sashiko flags that genlmsg_reply() always consumes the skb. The error path calls nlmsg_free(rsp) so we can't jump directly to it. Let's not unbind, just propagate the error to the user. This is the typical way of handling genlmsg_reply() failures. They shouldn't happen unless user does something silly like calling the kernel with an already-full rcvbuf. | ||||
| CVE-2026-53286 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix double free and use-after-free in aux device error paths When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or idpf_plug_core_aux_dev(), the err_aux_dev_add label calls auxiliary_device_uninit() and falls through to err_aux_dev_init. The uninit call will trigger put_device(), which invokes the release callback (idpf_vport_adev_release / idpf_core_adev_release) that frees iadev. The fall-through then reads adev->id from the freed iadev for ida_free() and double-frees iadev with kfree(). Free the IDA slot and clear the back-pointer before uninit, while adev is still valid, then return immediately. Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization") fixed the same use-after-free in the matching unplug path in this file but missed both probe error paths. | ||||
| CVE-2026-53287 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix incorrect inheritable capability in CAPSET records __audit_log_capset() records the effective capability set into the inheritable field due to a copy-paste error. Every CAPSET audit record therefore reports cap_pi (process inheritable) with the value of cap_effective instead of cap_inheritable. This silently corrupts audit data used for compliance and forensic analysis: an attacker who modifies inheritable capabilities to prepare for a privilege-escalating exec would have the change masked in the audit trail. The bug has been present since the original introduction of CAPSET audit records in 2008. | ||||
| CVE-2026-53179 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read. | ||||
| CVE-2026-53196 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_ti: fix heap overflow in get_manuf_info() get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). [ johan: amend commit message; also check for short descriptors ] | ||||
| CVE-2026-53130 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/omfs: reject s_sys_blocksize smaller than OMFS_DIR_START omfs_fill_super() rejects oversized s_sys_blocksize values (> PAGE_SIZE), but it does not reject values smaller than OMFS_DIR_START (0x1b8 = 440). Later, omfs_make_empty() uses sbi->s_sys_blocksize - OMFS_DIR_START as the length argument to memset(). Since s_sys_blocksize is u32, a crafted filesystem image with s_sys_blocksize < OMFS_DIR_START causes an unsigned underflow there, wrapping to a value near 2^32. That drives a ~4 GiB memset() from bh->b_data + OMFS_DIR_START and overwrites kernel memory far beyond the backing block buffer. Add the corresponding lower-bound check alongside the existing upper-bound check in omfs_fill_super(), so that malformed images are rejected during superblock validation before any filesystem data is processed. | ||||
| CVE-2026-53143 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11 The v11 MQD manager incorrectly assigned the CP-compute variants of checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow. During CRIU checkpoint of an SDMA queue on Navi3x: - checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer, leaking 1536 bytes of adjacent GTT memory to userspace During CRIU restore: - restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer, corrupting 1536 bytes of adjacent GTT memory (often the ring buffer or neighboring MQDs) This is a copy-paste regression unique to v11. All other ASIC backends (cik, vi, v9, v10, v12) correctly use the SDMA-specific variants. Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly handle the smaller v11_sdma_mqd structure, matching the pattern used in other MQD managers. (cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c) | ||||
| CVE-2026-53146 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Limit XDomain response copy to actual frame size tb_xdomain_copy() copies req->response_size bytes from the received packet buffer regardless of the actual frame size. When a short response arrives, this reads past the valid frame data in the DMA pool buffer into stale contents from previous transactions. Use the minimum of frame size and expected response size for the copy length. | ||||
| CVE-2026-53190 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait() dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first() which does cursor->chain = dma_fence_get(head), taking an extra reference. On normal loop completion, dma_fence_unwrap_next() releases this via dma_fence_chain_walk() -> dma_fence_put(). When virtio_gpu_do_fence_wait() fails and the function returns early from inside the loop, the cursor->chain reference is never released. This is the only caller in the entire kernel that does an early return inside dma_fence_unwrap_for_each. Add dma_fence_put(itr.chain) before the early return. | ||||
| CVE-2026-53128 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drbd: Balance RCU calls in drbd_adm_dump_devices() Make drbd_adm_dump_devices() call rcu_read_lock() before rcu_read_unlock() is called. This has been detected by the Clang thread-safety analyzer. | ||||
| CVE-2026-53035 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix iter deadlock bpf_iter_unix_seq_show() may deadlock when lock_sock_fast() takes the fast path and the iter prog attempts to update a sockmap. Which ends up spinning at sock_map_update_elem()'s bh_lock_sock(): WARNING: possible recursive locking detected test_progs/1393 is trying to acquire lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: sock_map_update_elem+0xdb/0x1f0 but task is already holding lock: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_UNIX); lock(slock-AF_UNIX); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by test_progs/1393: #0: ffff88814b59c790 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x59/0x10d0 #1: ffff88811ec25fd8 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: bpf_seq_read+0x42c/0x10d0 #2: ffff88811ec25f58 (slock-AF_UNIX){+...}-{3:3}, at: __lock_sock_fast+0x37/0xe0 #3: ffffffff85a6a7c0 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x51d/0xb00 Call Trace: dump_stack_lvl+0x5d/0x80 print_deadlock_bug.cold+0xc0/0xce __lock_acquire+0x130f/0x2590 lock_acquire+0x14e/0x2b0 _raw_spin_lock+0x30/0x40 sock_map_update_elem+0xdb/0x1f0 bpf_prog_2d0075e5d9b721cd_dump_unix+0x55/0x4f4 bpf_iter_run_prog+0x5b9/0xb00 bpf_iter_unix_seq_show+0x1f7/0x2e0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2026-46305 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc The return value of kzalloc_flex() is used without ensuring that the allocation succeeded, and the pointer is dereferenced unconditionally. Guard the access to the allocated structure to avoid a potential NULL pointer dereference if the allocation fails. | ||||
| CVE-2026-46071 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12 svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB. However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and clearing clean bits in vmcb12 is not architecturally defined. Move vmcb_mark_dirty() to callers and drop it for vmcb12. This also facilitates incoming refactoring that does not pass the entire VMCB to svm_copy_lbrs(). | ||||
| CVE-2026-46095 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: raise barrier before state machine transition Move the barrier raise operation before calling llbitmap_state_machine() in both llbitmap_start_write() and llbitmap_start_discard(). This ensures the barrier is in place before any state transitions occur, preventing potential race conditions where the state machine could complete before the barrier is properly raised. | ||||
| CVE-2026-45932 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tcx/netkit detach permissions when prog fd isn't given This commit fixes a security issue where BPF_PROG_DETACH on tcx or netkit devices could be executed by any user when no program fd was provided, bypassing permission checks. The fix adds a capability check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case. | ||||
| CVE-2026-43487 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Disable LPM on ST1000DM010-2EP102 According to a user report, the ST1000DM010-2EP102 has problems with LPM, causing random system freezes. The drive belongs to the same BarraCuda family as the ST2000DM008-2FR102 which has the same issue. | ||||