Export limit exceeded: 378141 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378141 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68470 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: validate extension-frame layout before RX Extension frames only have the extension header at the regular 802.11 header offset. The generic RX path can still reach helpers and interface dispatch code that read regular header address fields before unsupported extension subtypes are dropped. mac80211 currently only handles S1G beacon extension frames. Drop other extension subtypes before they can reach regular-header RX processing. For S1G beacons, linearize the SKB with the management-frame path and require the fixed S1G beacon header, including optional fixed fields indicated by frame control, before generic RX dispatch. Route S1G beacons through the station/default-link RX path without regular-header station lookup. Avoid regular-header address reads in the mac80211 RX paths that process S1G extension beacons, including accept-frame, duplicate-detection, address-copy, and MLO address-translation paths. Also make ieee80211_get_bssid() length-safe before returning the S1G source-address pointer. | ||||
| CVE-2026-68469 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix permanently busy scans after multiple roam iterations In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours). On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test. The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running. Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation. The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations. Each test ran in each device for at least 3 hours. | ||||
| CVE-2026-68468 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: virt-concat: free duplicate generated name Every MTD registration runs mtd_virt_concat_create_join(). Once a virtual concat has already been registered, the function builds the same name again and takes the equal-name branch. That branch skips to the next item without freeing the newly allocated string. Free the temporary name before continuing. | ||||
| CVE-2026-68467 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: mchp23k256: use SPI match data for chip caps The driver stores chip capacity information in both the OF match table and the SPI id table. Probe currently uses of_device_get_match_data(), so a non-OF SPI modalias match falls back to mchp23k256_caps even when the SPI id table selected a different part. Use spi_get_device_match_data() so SPI id-table driver_data is consumed when OF match data is absent. This keeps the existing default fallback while avoiding the wrong MTD geometry for id-table-only matches. | ||||
| CVE-2026-68466 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout lpc32xx_xmit_dma() waits for the DMA completion callback but ignores wait_for_completion_timeout(). A timed out DMA transfer is therefore unmapped and reported as successful to the NAND read/write path. Return -ETIMEDOUT when the completion wait expires. Terminate the DMA channel before unmapping the scatterlist so the timed out transfer cannot continue to access the buffer after the error is returned. | ||||
| CVE-2026-68465 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: fix esdhc_change_pinstate() to allow default state restore esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the top of the function and returns -EINVAL if either is not defined. This prevents the default case from ever being reached, which means devices with a sleep pinctrl state but without high-speed pin states (100mhz/ 200mhz) can never restore their default pin configuration. Move the IS_ERR checks for pins_100mhz and pins_200mhz into their respective switch cases. | ||||
| CVE-2026-68464 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning occurs. This happens because the usdhc interrupt is not disabled during system suspend when device_may_wakeup() returns false. The sequence of events leading to this issue: 1. System enters suspend without disabling usdhc interrupt (because device_may_wakeup() returns false for usdhc device) 2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt 3. WIFI sends a Card interrupt before usdhc has fully resumed 4. usdhc is still in runtime suspend state and cannot handle the interrupt properly 5. The unhandled interrupt triggers "nobody cared" warning Fix this by unconditionally disabling the usdhc interrupt during suspend and re-enabling it during resume, regardless of the wakeup capability. This ensures no interrupts are processed during the suspend/resume transition. | ||||
| CVE-2026-68463 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to simplify error handling. pm_runtime_resume_and_get() automatically drops the usage counter on failure, avoiding the need for a separate pm_runtime_put_noidle() call. If it fails, the device is unclocked and accessing hardware registers would cause a kernel panic, so return the error immediately. | ||||
| CVE-2026-68462 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative const offsets for buffer pointers The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF accesses, but it currently accepts a constant negative offset produced by pointer arithmetic. Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") moved constant pointer offsets from reg->off to reg->var_off. However, __check_buffer_access() continued to check only the instruction offset. An access with reg->var_off equal to -8 and an instruction offset of zero therefore passes verification. For writable raw tracepoints, the access end is also calculated from the unsigned reg->var_off.value. An eight-byte access starting at -8 wraps the calculated end to zero, allowing the program to load and attach without increasing max_tp_access. After ensuring that reg->var_off is constant, calculate the effective access start using signed arithmetic and reject it when it is negative. Use the validated start to calculate the access end for both PTR_TO_TP_BUFFER and PTR_TO_BUF. | ||||
| CVE-2026-68461 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: device property: initialize the remaining fields of fwnode_handle in fwnode_init() If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitialized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. While at it: initialize the remaining fields of struct fwnode_handle too just to be sure. [ Fix typo in commit message. - Danilo ] | ||||
| CVE-2026-68460 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in f2fs_balance_fs() When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 __filemap_get_folio+0x214/0x348 pagecache_get_page+0x20/0x70 f2fs_get_read_data_page+0x150/0x3e8 f2fs_get_lock_data_page+0x2c/0x160 move_data_page+0x50/0x478 do_garbage_collect+0xd38/0x1528 f2fs_gc+0x240/0x7e0 f2fs_balance_fs+0x1a0/0x208 f2fs_write_single_data_page+0x6e4/0x730 f2fs_write_cache_pages+0x378/0x9b0 f2fs_write_data_pages+0x2e4/0x388 do_writepages+0x8c/0x2c8 __writeback_single_inode+0x4c/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x200 INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_write_inode+0xf4/0x328 __writeback_single_inode+0x370/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x20 INFO: task B:1902 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_map_blocks+0x94c/0x1110 f2fs_file_write_iter+0x228/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task sync:2769849 blocked for more than 120 seconds. Tainted: G ---truncated--- | ||||
| CVE-2026-68459 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs() When we mount device w/ gc_merge mount option, we may suffer below potential deadlock: Kworker GC trehad Truncator - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - folio_start_writeback --- set writeback flag on folio - f2fs_outplace_write_data : cached folio in internal bio cache - f2fs_balance_fs - wake_up(gc_thread) : wake up gc thread to run foreground GC - finish_wait(fggc_wq) : wait on the waitqueue --- wait on GC thread to finish the work - truncate_inode_pages_range - __filemap_get_folio(, FGP_LOCK) --- lock folio - truncate_inode_partial_folio - folio_wait_writeback --- wait on writeback being cleared - do_garbage_collect - move_data_page - f2fs_get_lock_data_folio - lock on folio --- blocked on folio's lock In order to avoid such deadlock, let's call below functions to commit cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did in NOGC_MERGE path. - f2fs_submit_merged_write(sbi, DATA); - f2fs_submit_all_merged_ipu_writes(sbi); | ||||
| CVE-2026-68458 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: binder: cache secctx size before release zeroes it binder_transaction() bounds the scatter-gather buffer area with sg_buf_end_offset and subtracts the aligned LSM context size because the secctx is written at the tail of that area. The subtraction reads lsmctx.len, but that field has already been cleared by the time the line runs: security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */ lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64)) extra_buffers_size += lsmctx_aligned_size ... security_release_secctx(&lsmctx) /* memset zeroes len */ ... sg_buf_end_offset = sg_buf_offset + extra_buffers_size - ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */ security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len reads back as 0 and the subtraction contributes nothing, leaving sg_buf_end_offset too large by the aligned secctx size on every transaction to a txn_security_ctx node. Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset - sg_buf_offset as the sole upper bound on its copy, so the inflated end offset lets the copy run into the bytes that already hold the secctx. The aligned size must therefore be cached before release rather than re-read from the now-cleared field. Fix by caching it in lsmctx_aligned_size at function scope when it is first computed and subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after release. Reuse the same value for the earlier buf_offset computation. | ||||
| CVE-2026-68457 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for FSCTL mutations SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB handle but call VFS xattr, fallocate or fileattr helpers with the current ksmbd worker credentials. Those helpers can revalidate inode permissions, ownership and LSM policy independently of the SMB handle access mask. Run each operation with the credentials captured in the target file when the handle was opened. Keep credential handling local to these single-file FSCTLs rather than applying session credentials to the complete IOCTL handler, which also contains handle-less and multi-handle operations. | ||||
| CVE-2026-68456 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect() ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(), but does not wait for its completion, not even in .disconnect(); so, if the device is unplugged meanwhile, its teardown runs concurrently with that. Even though this inconsistency is worth addressing on its own, it has also triggered several bug reports in syzbot over the years (some auto-closed) where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER) creates a firmware subdirectory in the device directory during its removal, which might hit unexpected conditions in kernfs, apparently, depending at which point the add and remove operations raced. (See links.) The pattern is: usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2 usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw <ERROR> Call trace: ... kernfs_create_dir_ns sysfs_create_dir_ns create_dir kobject_add_internal kobject_add_varg kobject_add class_dir_create_and_add get_device_parent device_add fw_load_sysfs_fallback fw_load_from_user_helper firmware_fallback_sysfs _request_firmware request_firmware_work_func ... (Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].) While the kernfs side is being looked at, the ueagle-atm side can be fixed by waiting for the pre-firmware load in the .disconnect() handler. This change has a similar approach to previous work by Andrey Tsygunka [2] (wait_for_completion() in .disconnect()), but it is relatively different in design/implementation; using the Originally-by tag for credit assignment. This has been tested with: - synthetic reproducer to check the error path; - USB gadget (virtual device) to check the firmware upload path; - QEMU device emulator to check the device ID re-enumeration path; (The latter two were written by Claude; no other code/text in this commit.) Links (year first reported): 2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d 2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4 2024 https://syzbot.org/bug?extid=306212936b13e520679d 2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 2022 https://syzbot.org/bug?extid=782984d6f1701b526edb 2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490 2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881 2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90 [1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 [2] https://lore.kernel.org/lkml/20250410093146.3776801-2-aitsygunka@yandex.ru/ | ||||
| CVE-2026-68455 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: validate session type before performing operation The sessions ioctls are not applicable to all session types. PRESERVE_FD is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only valid for incoming session. Calling a incoming ioctl on an outgoing session is invalid and can cause file handlers to run into unexpected errors. For example, a user can create a (outgoing) session, preserve a memfd, and then immediately do a retrieve without doing a kexec in between. This would result in memfd's retrieve handler to run. The handlers expects to be called from a post-kexec context, and will try to do a kho_restore_vmalloc() or kho_restore_folio() to try and restore memory. KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but since this is considered an internal error and KHO throws out a bunch of WARN()s. Associate a type with each ioctl op and validate the type in luo_session_ioctl() before dispatching the ioctl handler to make sure the op is being called for the right session type. | ||||
| CVE-2026-18387 | 2 Trainingbusinesspros, Wordpress | 2 Groundhogg — Crm, Newsletters, And Marketing Automation, Wordpress | 2026-08-15 | 6.5 Medium |
| The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to generic SQL Injection via the 'tag_query' parameter in all versions up to, and including, 4.5.14 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with vendor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires the attacker to trigger the vulnerable Legacy_Contact_Query code path by submitting an unknown filter type (e.g. filters[0][0][type]=force_fallback), which causes a FilterException that dispatches execution away from the modern query handler. | ||||
| CVE-2026-16007 | 2026-08-15 | N/A | ||
| AppFlowy's qcuiknote feature is affected by a SQL injection vulnerability. Authenticated users with access to the feature can inject arbitrary SQL to exfiltrate data in the underlying SQL database. | ||||
| CVE-2026-15948 | 2 Themefic, Wordpress | 2 Hydra Booking — Appointment Scheduling & Booking Calendar, Wordpress | 2026-08-15 | 6.4 Medium |
| The Hydra Booking — Appointment Scheduling & Booking Calendar plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'first_name' parameter in all versions up to, and including, 1.2.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with host-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The tfhb_host role required to exploit this vulnerability can be self-assigned by any visitor via the plugin's public Signup shortcode, making this effectively exploitable by unauthenticated users who complete the registration flow. | ||||
| CVE-2026-13360 | 2 Wordpress, Wplegalpages | 2 Wordpress, Wplp Cookie Consent – Cookie Banner & Consent Management For Gdpr, Ccpa & Google Consent Mode | 2026-08-15 | 7.2 High |
| The Cookie Banner for GDPR / CCPA – WPLP Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'regionArray' parameter in all versions up to, and including, 4.3.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the site administrator has enabled the 'Support Google Consent Mode (GCM)' setting, which is disabled by default. Additionally, the AJAX handler performs no nonce or capability check, allowing any authenticated user including those with Subscriber-level access to overwrite the affected plugin setting. | ||||