Export limit exceeded: 48552 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (48552 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-18503 | 1 Python | 1 Cpython | 2026-08-18 | 2.8 Low |
| Attacker-controlled CSV samples can trigger super-linear regular-expression work during dialect sniffing and consume significant CPU when applications pass unbounded input to csv.Sniffer.sniff(). | ||||
| CVE-2026-72285 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Reject concurrent change to CPUID entry count Reject KVM_TDX_INIT_VM if userspace changes cpuid.nent between the initial read and the subsequent copy of the initialization data. tdx_td_init() first reads user_data->cpuid.nent to size the flexible kvm_tdx_init_vm copy. The copied structure also contains cpuid.nent, and that field can differ from the value used to size the allocation if userspace modifies the input concurrently. setup_tdparams_cpuids() later passes init_vm->cpuid.nent to kvm_find_cpuid_entry2(), which uses it as the array bound for the copied entries. Require the copied count to match the value used to size the allocation so that CPUID parsing cannot access beyond the entries actually copied. | ||||
| CVE-2026-72300 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() reads array->size while iterating over topology private data. The loop condition only checks that some data remains, so a malformed topology with a truncated trailing vendor array can make the parser read the size field before a full vendor-array header is available. Validate that the remaining private data contains a complete snd_soc_tplg_vendor_array header before reading array->size. The declared array size check also needs to remain signed. asize is an int, but sizeof(*array) has type size_t, so comparing them directly promotes negative asize values to unsigned and lets them pass the check, as reported in the stable review thread reference below. Cast sizeof(*array) to int when validating the declared array size. This rejects negative, zero and otherwise too-small sizes before the parser dispatches to the tuple-specific code. | ||||
| CVE-2026-72382 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject undersized DACLs before parsing ACEs parse_dacl() limits the attacker-controlled ACE count by comparing it with the number of minimal ACEs that fit in the DACL size. The DACL size field is 16 bits, but the expression subtracts sizeof(struct smb_acl). Because sizeof() is unsigned, a DACL size smaller than the ACL header underflows to a large size_t. A malicious client can reach this with: SMB2_SET_INFO (InfoType=SMB2_O_INFO_SECURITY) -> smb2_set_info_sec() -> set_info_sec() -> parse_sec_desc() -> parse_dacl() -> init_acl_state(..., 0xffff) -> init_acl_state(..., 0xffff) -> kmalloc_objs(..., 0xffff) Thus a malformed security descriptor can make num_aces pass the guard and drive large temporary ACL state and pointer-array allocations. Reject DACLs smaller than struct smb_acl before doing the subtraction, so the ACE count check cannot be bypassed by the underflow. | ||||
| CVE-2026-72402 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mask pseudo pointer values in verifier logs print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo sources when pointer leaks are not allowed, but the mask only covers BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE. BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can also be resolved to kernel pointer values before the verifier log prints the instruction. Include them in the existing pointer classification so the log prints 0x0 instead of the rewritten address. | ||||
| CVE-2026-72199 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate resident index root values on lookup Resident $INDEX_ROOT values carry index header fields that callers consume after lookup. Some callers already validate parts of the layout before walking entries, but those checks are scattered and do not cover all root header invariants, such as entries_offset alignment and lower bound, index_length, and allocated_size consistency. The resident root resize paths now keep these header fields consistent while the value size changes: ntfs_ir_truncate() lowers index.allocated_size before shrinking the resident value, and ntfs_ir_reparent() grows the resident value before publishing a larger root header. Lookup-time validation can therefore cover these invariants without tripping over the driver's own resize paths. Add $INDEX_ROOT to the minimum resident value size table and validate the resident index header fields before returning the attribute from lookup. Require 8-byte aligned index header fields, a sane entries_offset, an index_length within allocated_size, allocated_size within the resident value, and enough entry space for at least an index entry header. The shared validator already rejects non-resident records for resident-only attribute types, including $INDEX_ROOT. | ||||
| CVE-2026-72211 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: grow index root value before reparent header update ntfs_ir_reparent() moves the resident index root entries into an index block and leaves a small root stub containing the child VCN. That root stub can be larger than the existing resident value. For example, an empty root with value_length 48 has an index area of 32 bytes, while the large-index root stub needs index_length and allocated_size of 40 bytes. The current code publishes the larger index.index_length and index.allocated_size before resizing the resident value. If the resize returns -ENOSPC, the recovery path can call ntfs_inode_add_attrlist(), which looks attributes up again while the root header says allocated_size 40 but the resident value still only provides 32 bytes of index area. Lookup-time $INDEX_ROOT validation then correctly rejects that transient layout as corrupt. This reproduces as a generic/013 failure under qemu. In the failing run, the transient root had value_len=48, index_size=32, index_length=40, and allocated_size=40, and ntfsprogs-plus ntfsck reported "Corrupt index root in MFT record 1177". When the root stub grows, resize the resident value before publishing the larger root header. If the resize fails, the old root remains valid for recovery lookups. Keep the existing header-before-resize ordering for shrink or same-size cases so the resident value never temporarily exposes an allocated_size beyond its bounds. | ||||
| CVE-2026-72244 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpu/buddy: bail out of try_harder when alignment cannot be honoured The try_harder contiguous fallback could return a range whose start offset did not match the caller's min_block_size. When a candidate's start is misaligned, realign it: free the misaligned run and reallocate exactly @size at the next lower min_block_size boundary. This keeps the returned size unchanged with no surplus to trim, and rejects the request only when no aligned candidate fits. v2: align misaligned candidates down to min_block_size instead of bailing out, for both the RHS and LHS paths (Matthew). | ||||
| CVE-2026-75783 | 1 Trendnet | 2 Tew-wlc100p, Tew-wlc100p Firmware | 2026-08-18 | 9.6 Critical |
| A security vulnerability has been detected in TRENDnet TEW-WLC100P 12.07b01. Affected by this vulnerability is an unknown functionality of the file /sbin/netifd of the component DHCP blobmsg Handler. The manipulation leads to stack-based buffer overflow. The attack must be carried out from within the local network. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-19643 | 2 Amazon, Aws | 2 Aws Software Development Kit, Aws-sdk-cpp | 2026-08-18 | 5.3 Medium |
| An out-of-bounds read issue in the Base64 decoder in Amazon aws-sdk-cpp before 1.11.862, on some platforms, might allow a remote authenticated user to crash an application that processes crafted Base64-encoded input. To remediate this issue, users should upgrade to version 1.11.862. | ||||
| CVE-2026-75090 | 1 Ericlbuehler | 1 Mistral.rs | 2026-08-18 | 4.3 Medium |
| A vulnerability was detected in EricLBuehler Mistral.rs up to 0.8.22. Affected by this issue is the function convert_gguf_to_hf_tokenizer of the file mistralrs-core/src/gguf/gguf_tokenizer.rs of the component GGUF Tokenizer. The manipulation of the argument eos_token_id/bos_token_id/unknown_token_id results in out-of-bounds read. The attack can be executed remotely. The exploit is now public and may be used. Upgrading to version 0.8.23 can resolve this issue. The patch is identified as cd5297e2ea5cb27c790bdcf2f3c2f1064a81d55e. Upgrading the affected component is recommended. | ||||
| CVE-2026-23935 | 1 Zabbix | 1 Zabbix | 2026-08-18 | N/A |
| A Zabbix administrator is able to read out of bounds memory by utilizing a flaw in script item/preprocessing (JavaScript) HttpRequest logic, leading to potential confidentiality loss. | ||||
| CVE-2026-19969 | 1 Assimp | 1 Assimp | 2026-08-18 | 5.4 Medium |
| A security vulnerability has been detected in Open Asset Import Library Assimp 17c12da. The impacted element is the function Assimp::MDLImporter::GenerateOutputMeshes_3DGS_MDL7 of the file code/AssetLib/MDL/MDLLoader.cpp of the component 3DGS MDL7 Model Output Mesh Generator. The manipulation leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-19844 | 1 Totolink | 2 A800r, A800r Firmware | 2026-08-18 | 8.8 High |
| A vulnerability was found in TOTOLINK A800R 4.1.2cu.5137_B20200730. The impacted element is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component ipv6.so. Performing a manipulation of the argument radvdinterfacename results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. | ||||
| CVE-2026-19813 | 1 Totolink | 2 A800r, A800r Firmware | 2026-08-18 | 8.8 High |
| A security vulnerability has been detected in TOTOLINK A800R 4.1.2cu.5137_B20200730. This impacts the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. Such manipulation of the argument Comment leads to stack-based buffer overflow. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-15722 | 1 Redhat | 12 389 Directory Server, Directory Server, Directory Server E4s and 9 more | 2026-08-18 | 7.5 High |
| A stack buffer overflow flaw was found in 389 Directory Server (389-ds-base). The get_ruvelement_from_berval() function in repl5_ruv.c copies digit characters from a network-supplied RUV berval into a fixed 16-byte stack buffer without bounds checking. A remote unauthenticated attacker can crash the LDAP server by sending a crafted StartNSDS50ReplicationRequest extended operation containing a replica ID field with more than 16 digit characters. The overflow occurs during payload decoding, before any authorization check. Stack protectors limit impact to denial of service. | ||||
| CVE-2026-31641 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix RxGK token loading to check bounds rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length from the XDR token as u32 values and passes each through round_up(x, 4) before using the rounded value for validation and allocation. When the raw length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and kzalloc both use 0 while the subsequent memcpy still copies the original ~4 GiB value, producing a heap buffer overflow reachable from an unprivileged add_key() call. Fix this by: (1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX. (2) Sizing the flexible-array allocation from the validated raw key length via struct_size_t() instead of the rounded value. (3) Caching the raw lengths so that the later field assignments and memcpy calls do not re-read from the token, eliminating a class of TOCTOU re-parse. The control path (valid token with lengths within bounds) is unaffected. | ||||
| CVE-2026-70330 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-08-18 | 6.7 Medium |
| Heap-based buffer overflow in Windows DNS allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-75829 | 1 Getgrav | 1 Grav | 2026-08-18 | 8.1 High |
| grav-plugin-api versions before 1.0.15 fail to validate Twig content in the translate() endpoint, allowing attackers with api.pages.write permission to persist pages with process.twig enabled. Attackers can submit crafted header and content parameters to execute server-side template injection payloads that are evaluated at render time. | ||||
| CVE-2026-72208 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: add bounds check before accessing EA entries in ntfs_ea_lookup and ntfs_listxattr, this verifies that there is enough space in the EA entry before accessing the next_entry_offset field of the EA entry. | ||||