Export limit exceeded: 48161 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (48161 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46101 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: reject zero shift in nft_bitwise Reject zero shift operands for nft_bitwise left and right shift expressions during initialization. The carry propagation logic computes the carry from the adjacent 32-bit word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this into a 32-bit shift, which is undefined behaviour. Reject zero shift operands in the control plane, alongside the existing check for values greater than or equal to 32, so malformed rules never reach the packet path. | ||||
| CVE-2026-46142 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix VF illegal register access Register WX_CFG_PORT_ST is a PF restricted register. When a VF is initialized, attempting to read this register triggers an illegal register access, which lead to a system hang. When the device is VF, the bus function ID can be obtained directly from the PCI_FUNC(pdev->devfn). | ||||
| CVE-2026-68447 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size from hardware without bounding it to the allocated BO region. If the HW field is larger than the queue's control stack allocation, memcpy reads past the BO into adjacent GTT memory and can leak kernel data to userspace. Store the page-aligned control stack BO size in mqd_manager and clamp checkpoint copies and reported checkpoint sizes to min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound for multi-XCC v9.4.3 checkpoint layout. (cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3) | ||||
| CVE-2026-68446 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Validate vmw_surface_metadata::array_size This field comes from userspace and should be validated against specific limits depending on which Shader Model (SM) is available. | ||||
| CVE-2026-68445 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Prevent shader BO mappings from becoming writable vc4_gem_object_mmap() rejects a writable mapping of a validated shader BO, but leaves VM_MAYWRITE set. Userspace can map the BO read-only and then turn it writable with mprotect(). Validated shader BOs must stay read-only: the validator checks the instructions once and the GPU trusts them afterwards. A writable mapping lets userspace rewrite the code after validation, bypassing the validator. Clear VM_MAYWRITE on the read-only path so the mapping cannot be upgraded, as i915 already does for its read-only objects. | ||||
| CVE-2026-68433 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.6 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: bound get_version reply decode to front len handle_get_version_reply() uses msg->front_alloc_len as the decode boundary for MON_GET_VERSION_REPLY. That is the size of the reused reply buffer, not the number of bytes actually received. A truncated reply can therefore pass ceph_decode_need() and decode the second u64 from stale tail bytes left in the buffer by an earlier message, causing an uninitialized memory read. Use msg->front.iov_len as the receive-side decode boundary, matching other libceph reply handlers and limiting decoding to the bytes that were actually read from the wire. | ||||
| CVE-2026-68431 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate minimum PDU size for transform requests The receive path applies the minimum SMB2 PDU size check only when ProtocolId is SMB2_PROTO_NUMBER. A packet carrying SMB2_TRANSFORM_PROTO_NUM bypasses the check even when the negotiated dialect does not provide transform handling. On an SMB 2.1 connection, a short transform packet therefore reaches init_smb2_rsp_hdr(), which interprets the request as a full SMB2 header and reads beyond the request allocation. The copied fields can then be returned to the unauthenticated client. Compression transforms are converted to ordinary SMB2 messages before protocol validation. After that conversion, validate ordinary SMB2 requests against SMB2_MIN_SUPPORTED_PDU_SIZE and require encryption transform requests to contain both a transform header and an SMB2 header. This rejects truncated requests before work allocation. | ||||
| CVE-2026-68420 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: reject optional IPTFS templates in outbound policies syzbot reported a stack-out-of-bounds read in xfrm_state_find() which flows from xfrm_tmpl_resolve_one(). Commit 3d776e31c841 ("xfrm: Reject optional tunnel/BEET mode templates in outbound policies") disallowed optional tunnel and BEET in outbound policies to prevent this. Later when IPTFS added, it was not covered by that fix and can still trigger the out-of-bounds read; Extend the check to disallow optional IPTFS in outbound policies as well. IPTFS should be identical to tunnel mode. IN and FWD policies are not affected: xfrm_tmpl_resolve_one() is only reachable via the outbound path. Reproducer, before: ip link add dummy0 type dummy ip link set dummy0 up ip addr add 10.1.1.1/24 dev dummy0 ip xfrm policy add src 10.1.1.1/32 dst 10.1.1.2/32 dir out tmpl src fc00::dead:1 dst fc00::dead:2 proto esp reqid 1 mode iptfs level use tmpl src fc00::dead:1 dst fc00::dead:2 proto esp reqid 2 mode transport ping -W 1 -c 1 10.1.1.2 PING 10.1.1.2 (10.1.1.2) 56(84) bytes of data. [ 64.168420] ================================================================== [ 64.169977] BUG: KASAN: stack-out-of-bounds in __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] Read of size 4 at addr ffff88800e1ffd20 by task ping/2844 [ 64.169977] CPU: 2 UID: 0 PID: 2844 Comm: ping Not tainted 7.1.0-rc7-00180-geb23b588430a #98 PREEMPT(full) [ 64.169977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 64.169977] Call Trace: [ 64.169977] <TASK> [ 64.169977] dump_stack_lvl+0x47/0x70 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] print_report+0x152/0x4b0 [ 64.169977] ? ksys_mmap_pgoff+0x6d/0xa0 [ 64.169977] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 64.169977] ? rcu_read_unlock_sched+0xa/0x20 [ 64.169977] ? __virt_addr_valid+0x21b/0x230 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] kasan_report+0xa8/0xd0 [ 64.169977] ? __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] __xfrm6_addr_hash+0x11e/0x170 [ 64.169977] __xfrm_dst_hash+0x24/0xc0 [ 64.169977] xfrm_state_find+0xa2d/0x2f90 [ 64.169977] ? __pfx_xfrm_state_find+0x10/0x10 [ 64.169977] ? __pfx_ftrace_graph_ret_addr+0x10/0x10 [ 64.169977] ? __pfx_ftrace_graph_ret_addr+0x10/0x10 [ 64.169977] xfrm_tmpl_resolve_one+0x210/0x570 [ 64.169977] ? __pfx_xfrm_tmpl_resolve_one+0x10/0x10 [ 64.169977] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 64.169977] ? kernel_text_address+0x5b/0x80 [ 64.169977] ? __kernel_text_address+0xe/0x30 [ 64.169977] ? unwind_get_return_address+0x5e/0x90 [ 64.169977] ? arch_stack_walk+0x8c/0xe0 [ 64.169977] xfrm_tmpl_resolve+0x130/0x200 [ 64.169977] ? __pfx_xfrm_tmpl_resolve+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_inexact_lookup_rcu+0x10/0x10 [ 64.169977] ? __refcount_add_not_zero.constprop.0+0xb2/0x110 [ 64.169977] ? __pfx___refcount_add_not_zero.constprop.0+0x10/0x10 [ 64.169977] xfrm_resolve_and_create_bundle+0xd5/0x310 [ 64.169977] ? __pfx_xfrm_resolve_and_create_bundle+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_lookup_bytype+0x10/0x10 [ 64.169977] ? __pfx_xfrm_policy_lookup_bytype+0x10/0x10 [ 64.169977] xfrm_lookup_with_ifid+0x3d8/0xb80 [ 64.169977] ? __pfx_xfrm_lookup_with_ifid+0x10/0x10 [ 64.169977] ? ip_route_output_key_hash+0xc6/0x110 [ 64.169977] ? kasan_save_track+0x10/0x30 [ 64.169977] xfrm_lookup_route+0x18/0xe0 [ 64.169977] ip4_datagram_release_cb+0x4c9/0x530 [ 64.169977] ? __pfx_ip4_datagram_release_cb+0x10/0x10 [ 64.169977] ? do_raw_spin_lock+0x71/0xc0 [ 64.169977] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 64.169977] release_sock+0xb0/0x170 [ 64.169977] udp_connect+0x43/0x50 [ 64.169977] __sys_connect+0xa6/0x100 [ 64.169977] ? alloc_fd+0x2e9/0x300 [ 64.169977] ? __pfx___sys_connect+0x10/0x10 [ 64.169977] ? preempt_latency ---truncated--- | ||||
| CVE-2026-68388 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: handle overlapping allocated ranges in fallocate smb3_simple_fallocate_range() can skip holes when an allocated range returned by the server starts before the current fallocate offset. The skipped hole is not zero-filled, but fallocate still returns success. A later write to that hole may therefore fail with ENOSPC. The function queries allocated ranges so that it can preserve existing contents and write zeroes only into holes. However, the server may return a range that starts before the current fallocate offset. For example, assume the fallocate request is [100, 400) and the only allocated range returned by the server is [0, 200): Request: [100, 400) Server range: [ 0, 200) allocated Correct: [100, 200) allocated data, skip [200, 400) hole, zero-fill Current: [100, 300) skipped [300, 400) zero-filled afterwards The current code adds the full server range length, 200, to the current offset 100 and moves to 300. As a result, the hole in [200, 300) is skipped without being zero-filled. Fix this by advancing only over the part of the allocated range that overlaps the current fallocate offset. Ignore ranges that end before the current offset and reject ranges whose end offset overflows. This also prevents a malformed range length from causing an out-of-bounds zero-buffer read. | ||||
| CVE-2026-68373 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x-usb: avoid length underflow in at76_guess_freq() at76_guess_freq() checks only that the received frame is at least a bare 802.11 header (24 bytes) before subtracting the fixed management-body offset: len -= el_off; For both beacon and probe response frames, el_off is 36. If the frame is shorter than el_off, subtracting it causes the calculated IE length to wrap. The length is eventually passed to cfg80211_find_elem_match() as a very large unsigned value, so the element walk runs beyond the RX skb. This path is reached from at76_rx_tasklet() while scanning. If the device delivers a truncated beacon or probe response, the oversized IE length causes an out-of-bounds read during scanning. Skip the IE lookup if the frame does not reach the variable elements, before subtracting el_off. | ||||
| CVE-2026-68353 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries. | ||||
| CVE-2026-68340 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: occ: validate poll response sensor blocks The OCC poll response parser walks a counted list of sensor data blocks. It used the static backing-array capacity as the parse boundary, but a transport response makes only data_length bytes current and valid. A truncated response can therefore make the parser consume a block header or block extent outside the current response. Use data_length as the parent boundary, prove the fixed poll header and each current block header before reading them, and prove the complete block before advancing. Keep parsed sensor metadata local until the complete response has passed validation, then publish it. Propagate malformed-response errors before publishing the OCC as active. | ||||
| CVE-2026-68326 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound uAP association event IEs to the event buffer mwifiex_process_uap_event() handles EVENT_UAP_STA_ASSOC by exposing the (re)association request IEs that the firmware copies into the event: sinfo->assoc_req_ies = &event->data[len]; len = (u8 *)sinfo->assoc_req_ies - (u8 *)&event->frame_control; sinfo->assoc_req_ies_len = le16_to_cpu(event->len) - (u16)len; event->len is supplied by the device firmware and is never validated, and the subtraction is unchecked. assoc_req_ies points into adapter->event_body[MAX_EVENT_SIZE], a fixed-size array embedded in the kmalloc()'d struct mwifiex_adapter. On the ap_11n_enabled path mwifiex_set_sta_ht_cap() walks these IEs with cfg80211_find_ie(), whose for_each_element() loop dereferences each element header. A firmware-reported event->len larger than the bytes actually received makes assoc_req_ies_len describe IEs that extend past event_body, so the walk reads out of the adapter slab object, a slab-out-of-bounds read (KASAN: slab-out-of-bounds in cfg80211_find_ie). An event->len smaller than the header instead makes the int subtraction negative, which wraps to a huge size_t when stored in assoc_req_ies_len. The same length is handed to cfg80211_new_sta(), so a more modest over-claim can also copy stale event_body bytes into the NL80211_CMD_NEW_STATION notification. A malicious or malfunctioning mwifiex device (USB/SDIO/PCIe) can deliver such an event while the interface is in AP/uAP mode. Validate event->len before use: reject a length that underflows the header or that would place the IEs outside the event_body[] buffer the event was copied into. event->len here is struct mwifiex_assoc_event.len, a payload field internal to this event, not the transport frame length, so it is validated in this handler rather than at the generic MWIFIEX_TYPE_EVENT receive path, which only sees the event cause and the transport frame length. The bound is against event_body[MAX_EVENT_SIZE] rather than the actually-received length because the transports store the event differently (USB and SDIO leave the 4-byte event header in event_skb, PCIe strips it via skb_pull), whereas event_body is the single fixed buffer all of them copy the event into. This is the event-path analogue of the receive-path bounds checks added in commit 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets"). | ||||
| CVE-2026-68320 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix auth_chunk_list capacity check in sctp_auth_ep_add_chunkid sctp_auth_ep_add_chunkid() uses SCTP_NUM_CHUNK_TYPES (20) as the capacity limit for ep->auth_chunk_list, allowing it to hold up to 20 chunk entries (param_hdr.length up to 24). However, the copy destination asoc->c.auth_chunks in struct sctp_cookie is only SCTP_AUTH_MAX_CHUNKS (16) entries (20 bytes). When more than 16 chunks are added, sctp_association_init() memcpy overflows the destination by up to 4 bytes. Fix by using SCTP_AUTH_MAX_CHUNKS as the capacity limit, matching the destination capacity. | ||||
| CVE-2026-68316 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Fix element size accounting for cmd stream validation There are 2 issues with the element size handling in the command stream validation which result in too small of a size calculated when the element size is 16/32/64 bits. For NHWC format, the element size is simply missing from the calculation. The bitfield for the element size is different between IFM/IFM2 and OFM. IFM and IFM2 encode the precision in parameter bits 2:3, while OFM uses bits 1:2. | ||||
| CVE-2026-68287 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and NET_DM_ATTR_TIMESTAMP). On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for 64-bit alignment. However, net_dm_packet_report_size() and net_dm_hw_packet_report_size() used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)), budgeting 12 bytes instead of up to 16 bytes. This under-estimation of SKB size can lead to an skb_over_panic() when __nla_reserve() or skb_put() is subsequently called. Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. | ||||
| CVE-2026-68229 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: media: cedrus: skip invalid H.264 reference list entries Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the stateless slice control and later uses their indices to look up decode->dpb[] in _cedrus_write_ref_list(). Rejecting such controls in cedrus_try_ctrl() would break existing userspace, since stateless H.264 reference lists may legitimately carry out-of-range indices for missing references. Instead, guard the actual DPB lookup in Cedrus and skip entries whose indices do not fit the fixed V4L2_H264_NUM_DPB_ENTRIES array. This keeps the fix local to the driver use site and avoids out-of-bounds reads from malformed or unsupported reference list entries. | ||||
| CVE-2026-68219 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Fix potential out-of-bounds issues The maximum downscaling factor supported by ISI can be up to 16. Add minimum value constraint before applying the setting to hardware. Otherwise, the process will not respond even when Ctrl+C is executed. | ||||
| CVE-2026-68206 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC active reference counts HEVC slice parameters are shared stateless V4L2 controls, but the common validation path does not verify the active L0/L1 reference counts before driver-specific code consumes them. The original report came from Cedrus, but the active count bounds are not Cedrus-specific. Validate them in the common HEVC slice control path so stateless HEVC drivers get the same basic guarantees as soon as the control is queued. Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may use out-of-range sentinel values such as 0xff for missing references, and some hardware can use that information for concealment. Keep this common check limited to the active reference counts. | ||||
| CVE-2026-68196 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: validate assoc response length before subtracting header wilc_parse_assoc_resp_info() computes the trailing IE length as ies_len = buffer_len - sizeof(*res); without first checking that buffer_len is at least sizeof(struct wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a received association response (host_int_parse_assoc_resp_info() passes hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be validated before the driver accesses the fixed header. For a frame shorter than the 6-byte fixed header, the subtraction wraps. For a four-byte response the result is truncated to a u16 ies_len of 65534, so kmemdup() then attempts to copy 65534 bytes starting at buffer + sizeof(*res), beyond the valid association-response data (CWE-125). A response shorter than four bytes can also cause an out-of-bounds read of res->status_code at offsets 2 and 3. Reject frames too short to hold the fixed header before touching the header or computing ies_len. Also set the connection status to a failure on this path: the caller falls through to a "conn_info->status == WLAN_STATUS_SUCCESS" check after the parser returns, so leaving the status untouched could let a malformed short response be treated as a successful association. | ||||