Export limit exceeded: 14989 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14989 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-15105 | 1 Davenardella | 1 Snap7 | 2026-08-01 | 6.3 Medium |
| A flaw has been found in davenardella snap7 up to 1.4.3. This affects the function TS7Worker::PerformFunctionRead of the file src/core/s7_server.cpp of the component ReadVar Request Handler. This manipulation causes out-of-bounds write. The attack requires access to the local network. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-10587 | 1 Lenovo | 57 Ideapad 5 15aba7 Bios, Ideapad Pro 5 16agp11 Bios, Ideapad Pro 5 16asp10 Bios and 54 more | 2026-08-01 | 6 Medium |
| A potential out-of-bounds write vulnerability could allow a local privileged attacker to modify power management settings in System Management Mode. | ||||
| CVE-2026-64074 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap statmount_mnt_idmap() writes one mapping with seq_printf() and then manually advances seq->count to include the NUL separator. If seq_printf() overflows, seq_set_overflow() sets seq->count to seq->size. The manual seq->count++ changes this to seq->size + 1. seq_has_overflowed() then no longer detects the overflow. The corrupted count returns to statmount_string(), which later executes: seq->buf[seq->count++] = '\0'; This causes a 1-byte NULL out-of-bounds write on the dynamically allocated seq buffer. Fix this by checking for overflow immediately after seq_printf(). | ||||
| CVE-2026-64268 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. | ||||
| CVE-2026-64304 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate RSA CRT component lengths The generic RSA key parser (rsa_helper.c) bounds each CRT component (p, q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt() allocates half-size DMA buffers (key_sz / 2) and right-aligns each component with: memcpy(dst + half_key_sz - len, src, len) When a CRT component is larger than half_key_sz the subtraction underflows and memcpy writes past the DMA buffer, causing memory corruption. Add a len > half_key_sz check next to the existing !len check for each of the five CRT components so the driver falls back to the non-CRT path instead of writing out of bounds. | ||||
| CVE-2026-64336 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. | ||||
| CVE-2026-64354 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Validate BTF repeated field counts before expansion btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD, and btf_repeat_fields() expands repeatable fields from array elements into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields(). The remaining-capacity check performs the expanded field count calculation in u32. A malformed BTF can wrap that calculation, causing the check to pass even when the expanded field count exceeds the scratch array capacity. The following memcpy() can then write past the end of the array. Use checked addition and multiplication before copying repeated fields and reject impossible counts. | ||||
| CVE-2026-64366 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo doesn't have enough space for the incoming report. If the kfifo is empty, kfifo_skip() reads stale data left in the kmalloc'd buffer via __kfifo_peek_n() and interprets it as a record length, advancing fifo->out by that garbage value. This corrupts the internal kfifo state, causing kfifo_unused() to return a value much larger than the actual buffer size, which bypasses __kfifo_in_r()'s guard: if (len + recsize > kfifo_unused(fifo)) return 0; kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to 3842 bytes past the 256-byte buffer. Add a !kfifo_is_empty() condition to the while loop so kfifo_skip() is never called on an empty fifo, and check the return value of kfifo_in() to reject reports that are too large for the fifo. | ||||
| CVE-2026-64460 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/IOV: Skip VF Resizable BAR restore on read error sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register to decide how many VF BARs to restore (nbars) and which VF BAR each iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[], which has only PCI_SRIOV_NUM_BARS (6) entries. When a device does not respond, config reads typically return PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN reports this as: UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]' Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding during a failed GC6 power state exit. The subsequent pci_restore_state() invoked sriov_restore_vf_rebar_state() while config reads returned 0xffffffff, triggering the splat. Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE. No further VF BARs are touched, which is safe because a config read that returns PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is pointless. This mirrors the guard in pci_restore_rebar_state(). | ||||
| CVE-2026-64502 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices ad_sigma_delta_clear_pending_event() falls through to the status register read path for devices with has_registers = false and no rdy_gpiod. For such devices, ad_sd_read_reg() skips the address byte entirely and clocks raw MISO bytes with no address phase — making it byte-for-byte identical to reading conversion data. If a pending conversion result is present, this partially consumes it and corrupts the data stream for the subsequent ad_sd_read_reg() call in ad_sigma_delta_single_conversion(). Furthermore, with num_resetclks = 0 on these devices, data_read_len evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to SIZE_MAX and corrupting the heap. Fix by returning 0 immediately when neither rdy_gpiod nor has_registers is set. This is safe for all current registerless devices: ad7191 and ad7780 (with powerdown GPIO) are reset between conversions by CS deassertion, so there is no stale result to drain; ad7780 (without powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY at the output data rate regardless of whether the previous result was read, so the next falling edge fires naturally. A future registerless device that holds ~DRDY asserted until data is read would be broken by this early return and would require either num_resetclks set or a rdy-gpio. The same heap corruption is reachable on any device with rdy_gpiod set but num_resetclks = 0: if the GPIO indicates a pending event, the drain path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers. Add an explicit data_read_len == 0 guard after the pending event check; the stale result is then consumed by the first ad_sd_read_reg() call in ad_sigma_delta_single_conversion(). | ||||
| CVE-2026-64520 | 1 Linux | 1 Linux Kernel | 2026-08-01 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies The register-based PARTITION_INFO_GET path trusted the firmware-provided indices when copying partition descriptors into the caller buffer. Reject inconsistent counts or index progressions so the copy loop cannot write past the allocated array. (fixed cur_idx when exactly one descriptor in the first fragment) | ||||
| CVE-2026-17675 | 1 Google | 1 Chrome | 2026-07-31 | 9.6 Critical |
| Out of bounds write in ANGLE in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-17680 | 1 Google | 2 Chrome, Chrome Os | 2026-07-31 | 9.6 Critical |
| Heap buffer overflow in Color in Google Chrome on ChromeOS prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-17727 | 1 Google | 2 Android, Chrome | 2026-07-31 | 9.6 Critical |
| Out of bounds write in WebGL in Google Chrome on Android prior to 151.0.7922.72 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-14422 | 1 Google | 1 Chrome | 2026-07-31 | 8.8 High |
| Out of bounds read and write in Tint in Google Chrome prior to 150.0.7871.46 allowed a remote attacker to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-14397 | 2 Apple, Google | 2 Macos, Chrome | 2026-07-31 | 9.6 Critical |
| Out of bounds write in ANGLE in Google Chrome on Mac prior to 150.0.7871.46 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-17774 | 1 Google | 1 Chrome | 2026-07-31 | 7.5 High |
| Insufficient validation of untrusted input in Variations in Google Chrome prior to 151.0.7922.72 allowed an attacker in a privileged network position to potentially exploit heap corruption via malicious network traffic. (Chromium security severity: Medium) | ||||
| CVE-2026-10589 | 2026-07-31 | 6 Medium | ||
| A potential out of bounds write vulnerability could allow a local privileged attacker to execute code in System Management Mode. | ||||
| CVE-2026-40953 | 1 Absolute | 1 Secure Access | 2026-07-30 | 4.4 Medium |
| CVE-2026-40953 is a heap overflow in the certificate parsing function of Secure Access clients prior to 14.55. Attackers with local access and administrator permissions can create a denial of service attack against the client over which they have control. | ||||
| CVE-2026-50144 | 1 Tencent | 1 Ncnn | 2026-07-30 | 7.1 High |
| ncnn is a high-performance neural network inference framework optimized for the mobile platform. In commit e54f7b1f88434e1d844ea0551b880a1cfb079ce1 and earlier, ncnn allows an out-of-bounds heap write in ncnn::ParamDict::load_param() when Net::load_param() loads a malicious .param model file because the parsed parameter id is checked only against id >= NCNN_MAX_PARAM_COUNT, allowing a negative id to index before the params[NCNN_MAX_PARAM_COUNT] array. This vulnerability is fixed by commit 5a0288f255daa6c3294f77109f67718e434ec020. | ||||