Export limit exceeded: 36106 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36106 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-59131 | 1 Microsoft | 20 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 17 more | 2026-08-13 | 5.6 Medium |
| No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally. | ||||
| CVE-2022-49112 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mt76: fix monitor mode crash with sdio driver mt7921s driver may receive frames with fragment buffers. If there is a CTS packet received in monitor mode, the payload is 10 bytes only and need 6 bytes header padding after RXD buffer. However, only RXD in the first linear buffer, if we pull buffer size RXD-size+6 bytes with skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in __skb_pull(). To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to 256 to make sure all MCU operation in linear buffer. [ 52.007562] kernel BUG at include/linux/skbuff.h:2313! [ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 52.007987] pc : skb_pull+0x48/0x4c [ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common] [ 52.008361] Call trace: [ 52.008377] skb_pull+0x48/0x4c [ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c] [ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917] [ 52.008449] kthread+0x148/0x3ac [ 52.008466] ret_from_fork+0x10/0x30 | ||||
| CVE-2026-64231 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: don't dump registers past the mapped region On DSI 6G platforms the IO address space is internally adjusted by io_offset. Later this adjusted address might be used for memory dumping. However the size that is used for memory dumping isn't adjusted to account for the io_offset, leading to the potential access to the unmapped region. Lower ctrl_size by the io_offset value to prevent access past the mapped area. msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P) msm_dsi_host_snapshot+0x4c/0x78 [msm] msm_dsi_snapshot+0x28/0x50 [msm] msm_disp_snapshot_capture_state+0x74/0x140 [msm] msm_disp_snapshot_state_sync+0x60/0x90 [msm] _msm_disp_snapshot_work+0x30/0x90 [msm] kthread_worker_fn+0xdc/0x460 kthread+0x120/0x140 Patchwork: https://patchwork.freedesktop.org/patch/721747/ | ||||
| CVE-2026-64232 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: recompute nr_integrity_segments in blk_insert_cloned_request blk_insert_cloned_request() already recomputes nr_phys_segments against the bottom queue, because "the queue settings related to segment counting may differ from the original queue." The exact same reasoning applies to integrity segments: a stacked driver's underlying queue can have tighter virt_boundary_mask, seg_boundary_mask, or max_segment_size than the top queue, in which case blk_rq_count_integrity_sg() against the bottom queue produces a different count than the cached rq->nr_integrity_segments inherited from the source request by blk_rq_prep_clone(). When the cached count is lower than the bottom queue's actual count, blk_rq_map_integrity_sg() trips BUG_ON(segments > rq->nr_integrity_segments); on dispatch. The same families of stacked setups that motivated the existing nr_phys_segments recompute -- dm-multipath fanning out to nvme-rdma in particular -- can produce this. Mirror the nr_phys_segments handling: when the request carries integrity, recompute nr_integrity_segments against the bottom queue and reject the request if it exceeds the bottom queue's max_integrity_segments. blk_rq_count_integrity_sg() and queue_max_integrity_segments() are both already available via <linux/blk-integrity.h>, which blk-mq.c includes. This closes a latent gap in the stacking contract and brings the integrity-segment accounting in line with the existing phys-segment accounting. | ||||
| CVE-2026-64233 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind uvc_function_bind() walks &opts->extension_units twice without holding opts->lock: - directly, for the iExtension string-descriptor fixup loop; - indirectly, four times via uvc_copy_descriptors() (once per speed), where the helper iterates uvc->desc.extension_units (which aliases &opts->extension_units) to size and emit XU descriptors. The configfs side (uvcg_extension_make / uvcg_extension_drop, in drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its list_add_tail / list_del operations. A privileged userspace process that holds the configfs subtree open and writes the gadget UDC name to bind the function while concurrently rmdir()'ing an extensions subdir can race uvcg_extension_drop() against the bind-time list walks and dereference a freed struct uvcg_extension. Hold opts->lock from the start of the XU string-descriptor fixup through the last uvc_copy_descriptors() call, releasing on the descriptor-error path via a new error_unlock label that drops the lock before falling through to the existing error label. This matches the locking discipline of the configfs callbacks and removes the only remaining unsynchronised reader of the XU list during bind. Reachability: only privileged processes that can mount configfs and write to gadget UDC files can trigger the race, so this is a correctness fix rather than a security boundary. | ||||
| CVE-2026-64235 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform (eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline crashes on the first call into the traced function: BUG: unable to handle page fault for address: ffff88817ae18880 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 4b53067 P4D 4b53067 PUD 0 Oops: Oops: 0002 [#1] SMP PTI CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89 Call Trace: <TASK> ? find_held_lock ? exc_page_fault ? lock_release ? __x64_sys_clock_nanosleep ? lockdep_hardirqs_on_prepare ? trace_hardirqs_on __x64_sys_clock_nanosleep do_syscall_64 ? exc_page_fault ? call_depth_return_thunk entry_SYSCALL_64_after_hwframe ... Kernel panic - not syncing: Fatal exception This small reproducer allows to easily trigger the crash: # echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events # echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable # usleep 1 Monitoring the crash under GDB points to the exact instruction in charge of incrementing the call depth: sarq $5, %gs:__x86_call_depth(%rip) This instruction matches the one inserted by the ftrace_regs_caller from ftrace_64.S. This emitted code was likely working fine until the introduction of 59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"): it has made the call depth accounting addressing relative to $rip, instead of being based on an absolute address. As this code exact location depends on where the trampoline lives in memory, the corresponding displacement needs to be adjusted at runtime to actually correctly find the per-cpu __x86_call_depth value, otherwise the targeted address is wrong, leading to the page fault seen above. Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(), as it is done for example by the x86 BPF JIT compiler through x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots, in ftrace_caller and ftrace_regs_caller. [ bp: Massage. ] | ||||
| CVE-2026-59130 | 1 Microsoft | 20 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 17 more | 2026-08-12 | 5.6 Medium |
| No cwe for this issue in AMD Zen allows an authorized attacker to disclose information locally. | ||||
| CVE-2024-26882 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-12 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() Apply the same fix than ones found in : 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. syzbot reported: BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389 ipgre_rcv net/ipv4/ip_gre.c:411 [inline] gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447 gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 netif_receive_skb_internal net/core/dev.c:5734 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5793 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556 tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590 alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133 alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204 skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909 tun_build_skb drivers/net/tun.c:1686 [inline] tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b | ||||
| CVE-2026-64250 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Report dying CPU to RCU in stop_this_cpu() This is a port of MIPS commit 9f3f3bdc6d9dac1 ("MIPS: smp: report dying CPU to RCU in stop_this_cpu()"). smp_send_stop() parks all secondary CPUs in stop_this_cpu(). And the function marks the CPU offline for the scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps expecting a quiescent state from CPUs that are now spinning forever with interrupts disabled. As long as nothing waits for an RCU grace period after smp_send_stop() this is harmless, which is why it went unnoticed. However, since commit 91840be8f710370 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT"), irq_work_sync() calls synchronize_rcu() on architectures without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns false. Any irq_work_sync() issued in the reboot/shutdown/halt path after smp_send_stop() then blocks on a grace period that can never complete, hanging the reboot: WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on ... rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: Offline CPU 1 blocking current GP. rcu: Offline CPU 2 blocking current GP. rcu: Offline CPU 3 blocking current GP. This issue needs some hacks to reproduce, and it was not noticed on LoongArch because arch_irq_work_has_interrupt() usually returns true. Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs and grace periods can still complete. LoongArch shuts down all CPUs here without going through the CPU-hotplug mechanism, so this report is not otherwise issued. | ||||
| CVE-2026-64252 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Prevent initial console buffer from landing in XKPHYS In 64-bit configurations calling the initial console output handler from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment and consequently so has been the buffer allocated there that is used as the argument corresponding to the `%s' output conversion specifier for the firmware's printf() entry point. This 64-bit address will then be truncated by 32-bit firmware, resulting in an attempt to access the wrong memory location, which in turn will cause all kinds of unpredictable behaviour, such as a kernel crash: Console: colour dummy device 160x64 Calibrating delay loop... 49.36 BogoMIPS (lpj=192512) pid_max: default: 32768 minimum: 301 CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800 Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121 $ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0 $ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073 $ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473 $12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000 $16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240 $20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b $24 : ffffffffffffffbf 000000000203bd00 $28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800 Hi : 0000000000000000 Lo : 0000000000000aa8 epc : ffffffffbfc08364 0xffffffffbfc08364 ra : ffffffffbfc08800 0xffffffffbfc08800 Status: 140120e2 KX SX UX KERNEL EXL Cause : 00000008 (ExcCode 02) BadVA : 000000000203bd00 PrId : 00000430 (R4000SC) Modules linked in: Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d 80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38 0000000000000000 000000000203bd00 0000000000000000 0000000000000000 0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000002500000000 0000000000000000 0000000000000000 802c1a7400000000 0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172 6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320 806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000 ... Call Trace: Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception in interrupt KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8) >> In this case the pointer in $4 was truncated from 0x980000000203bd00 to 0x000000000203bd00. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started. Fix the issue by making the buffer static and initdata, and therefore placed in the CKSEG0 32-bit compatibility segment, observing that the console output handler is called with the console lock held, implying no need for this code to be reentrant. Add an assertion to verify the buffer actually has been placed in a compatibility segment. | ||||
| CVE-2026-64256 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't wrap around quota ids in dqiterate LOLLM noticed that q_id is an unsigned 32-bit variable. If it happens to be set to XFS_DQ_ID_MAX due to a filesystem that actually has a dquot for ID_MAX, then this addition will truncate to zero and the iteration starts over. Fix this by casting to u64. | ||||
| CVE-2026-64257 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject overlapping data areas in SMB2 responses Commit 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") restricted the implied bcc[0] length exception to responses without a data area. However, the overlap handling in __smb2_calc_size() clears data_length, which can make an invalid response appear to have no data area and so qualify for the exception. Track data area overlap separately and reject such responses before applying the length compatibility exceptions. | ||||
| CVE-2026-64263 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix moving cancelled entry to ent_in_userspace list fuse_uring_cancel() moves entries that are available (these have no reqs attached) to the ent_in_userspace list. ent_list_request_expired() checks the first entry on ent_in_userspace and dereferences ent->fuse_req unconditionally, which will crash on a cancelled entry that was moved to this list. Fix this by freeing the entry and dropping queue_refs directly in fuse_uring_cancel(). This is safe because cancel is the cancel handler itself - after io_uring_cmd_done(), no more cancels will be dispatched for this command, and teardown serializes with cancel via queue->lock. Since cancel now decrements queue_refs, fuse_uring_abort() must no longer gate fuse_uring_abort_end_requests() on queue_refs > 0, as cancelled entries may have already dropped queue_refs while requests are still queued. Remove the gate so abort always flushes requests and stops queues. | ||||
| CVE-2026-64264 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix EFAULT clobber in fuse_uring_commit copy_from_user() returns the number of bytes not copied as an unsigned residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit stores that residual in ssize_t err, sets req->out.h.error to -EFAULT, then jumps to out: with err still holding the positive residual. err = copy_from_user(&req->out.h, &ent->headers->in_out, sizeof(req->out.h)); if (err) { req->out.h.error = -EFAULT; goto out; /* err is the positive residual */ } ... out: fuse_uring_req_end(ent, req, err); fuse_uring_req_end() then runs if (error) req->out.h.error = error; which overwrites the just-assigned -EFAULT with the positive residual. FUSE callers such as fuse_simple_request() test err < 0 to detect failure, so the positive value is interpreted as success and the caller proceeds with an uninitialised or partial req->out.args. Fix by assigning err = -EFAULT in the failure branch before jumping to out, so fuse_uring_req_end() receives a negative errno and sets req->out.h.error to -EFAULT. | ||||
| CVE-2026-64267 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fuse: avoid 32-bit prune notification count wrap FUSE_NOTIFY_PRUNE validates the nodeid payload length with: size - sizeof(outarg) != outarg.count * sizeof(u64) On 32-bit kernels, size_t is also 32 bits, so the daemon-controlled count multiplication can wrap. A prune notification with count 0x20000000 and no nodeid payload passes the check, enters the copy loop, and asks the device copy path to read nodeids that are not present in the userspace write buffer. In QEMU this reaches the fuse_copy_fill() BUG_ON(!err) path. Validate the payload length with array_size() instead. That accepts exactly the same valid messages, but avoids wrapping arithmetic before the copy loop consumes the count. | ||||
| CVE-2026-64111 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: lsm: hold cred_guard_mutex for lsm_set_self_attr() Just as proc_pid_attr_write() already does before calling the LSM hook. This only matters for SELinux and AppArmor which check whether the process is being ptraced and if so, whether to allow the transition. | ||||
| CVE-2026-64105 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Free private_irqs when init fails after allocation Companion to commit 250f25367b58 ("KVM: arm64: Tear down vGIC on failed vCPU creation"), which added the missing kvm_vgic_vcpu_destroy() call to the kvm_share_hyp() failure path in kvm_arch_vcpu_create(). The kvm_vgic_vcpu_init() failure path immediately above it has the same shape and still needs the same cleanup. Call kvm_vgic_vcpu_destroy() when kvm_vgic_vcpu_init() fails so private IRQs allocated before a redistributor iodev registration failure are released before the failed vCPU is freed. | ||||
| CVE-2026-64106 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 9 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits Userspace can restore an ITS Device Table Entry whose Size field encodes more EventID bits than the virtual ITS supports. The live MAPD path rejects that state, but vgic_its_restore_dte() accepts it and stores the out-of-range value in dev->num_eventid_bits. Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before allocating the device. This mirrors the MAPD check and prevents the restored state from reaching vgic_its_restore_itt(), where the unchecked value can be converted into an oversized scan_its_table() range. | ||||
| CVE-2026-64108 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix busy dentry used after unmounting Since commit 340cea84f691c ("cifs: open files should not hold ref on superblock"), cifs file only holds the dentry ref_cnt, the cifs file close work(cfile->deferred) could be executed after unmounting, which will trigger a warning in generic_shutdown_super: BUG: Dentry 00000000a14a6845{i=c,n=file} still in use (1) [unmount of cifs cifs] The detailed processs is: process A process B kworker fd = open(PATH) vfs_open file->__f_path = *path // dentry->d_lockref.count = 1 cifs_open cifs_new_fileinfo cfile->dentry = dget(dentry) // dentry->d_lockref.count = 2 close(fd) __fput cifs_close queue_delayed_work(deferredclose_wq, cfile->deferred) dput(dentry) // dentry->d_lockref.count = 1 smb2_deferred_work_close _cifsFileInfo_put list_del(&cifs_file->flist) umount cleanup_mnt deactivate_super cifs_kill_sb cifs_close_all_deferred_files_sb cifs_close_all_deferred_files // cannot find cfile, skip _cifsFileInfo_put kill_anon_super generic_shutdown_super shrink_dcache_for_umount umount_check WARN ! // dentry->d_lockref.count = 1 cifsFileInfo_put_final dput(cifs_file->dentry) // dentry->d_lockref.count = 0 Fix it by flushing 'deferredclose_wq' before calling kill_anon_super. Fetch a reproducer in https://bugzilla.kernel.org/show_bug.cgi?id=221548. | ||||
| CVE-2026-64291 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Set veventq_depth upper bound iommufd_veventq_alloc() accepts any !0 veventq_depth from userspace, with an upper bound at U32_MAX. This leaves a vulnerability where userspace can allocate excessively large queues to exhaust kernel memory reserves. Cap the veventq_depth (maximum number of entries) to 1 << 19, matching the maximum number of entries in the SMMUv3 EVTQ (the largest use case today). | ||||