| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sparkle is a software update framework for macOS. Prior to version 2.9.2, `Autoupdate/SUBinaryDeltaApply.m` enforces `relativePath.pathComponents containsObject:@".."` and rejects writes whose immediate parent directory IS itself a symbolic link, but does not detect symlinks deeper in the relative path. `Autoupdate/SPUSparkleDeltaArchive.m`'s `extractItem:` will create symlinks in the destination tree from archive content (no `..` check on the symlink target), and a subsequent `Extract` item targeting `<symlink>/foo/bar` then escapes the destination tree via `fopen(path, "wb")` because the kernel resolves the intermediate symlink during the open call. This is a defense-in-depth issue: exploitation requires a maliciously-crafted `.delta` that passes EdDSA signature verification, i.e. EdDSA private-key compromise. With the AppInstaller running as root for system-domain installs, it gives the holder of a stolen signing key arbitrary file write at root level via the delta-apply path, which is a strictly broader primitive than the "drop-in replacement bundle" install they would otherwise have. Version 2.9.2 contains a patch for the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table()
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: directly shut down timer on cleanup
batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by
timer_delete() to guard against the timer handler re-arming itself between
the two calls. This double-deletion hack relied on the sending status being
set to 0 to suppress re-arming.
Replace both calls with a single timer_shutdown_sync(). This function both
waits for any running timer callback to complete (like timer_delete_sync())
and permanently disarms the timer so it cannot be re-armed afterwards,
making re-arming prevention unconditional and self-documenting.
The re-arming property is also required because otherwise:
1. context 0 (batadv_tp_recv_ack()) checks in
batadv_tp_reset_sender_timer() if sending is still 1 -> it is
2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in
this process forces the kthread to stop timer in
batadv_tp_sender_cleanup()
3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the
timer -> but the reference for it is already gone |
| Data::DisjointSet::Shared versions before 0.02 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in dsu.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::SpatialHash::Shared versions before 0.02 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in sphash.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::Intern::Shared versions before 0.02 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in intern.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::RingBuffer::Shared versions before 0.04 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in ring.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::RoaringBitmap::Shared versions before 0.02 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in roaring.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::HashMap::Shared versions before 0.14 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in shm_generic.h with open(path, O_RDWR | O_CREAT | O_CLOEXEC, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::RadixTree::Shared versions before 0.02 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in radix.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::SortedSet::Shared versions before 0.03 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in sortedset.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::ReqRep::Shared versions before 0.05 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in reqrep.h with open(path, O_RDWR | O_CREAT, 0666), for both the request-reply and the integer-variant segments. The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::PubSub::Shared versions before 0.07 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in pubsub.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::NDArray::Shared versions before 0.02 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in ndarray.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::Graph::Shared versions before 0.04 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in graph.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::Deque::Shared versions before 0.06 for Perl create a world-readable mmap backing file and open it without O_EXCL or O_NOFOLLOW.
The segment is created in deque.h with open(path, O_RDWR|O_CREAT, 0666). The mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable). O_NOFOLLOW is absent, so a symlink planted at the path is followed, and O_EXCL is absent, so the open silently uses a pre-planted file instead of failing.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted file or symlink at the path lets a local attacker win a pre-creation race or redirect the open. |
| Data::Buffer::Shared versions before 0.05 for Perl create a world-readable mmap backing file and open it without O_NOFOLLOW.
The segment is created in buf_generic.h with open(path, O_RDWR|O_CREAT|O_EXCL, 0666). O_EXCL blocks a pre-seeded file on create, but the mode is 0666, so under the default umask 022 the file is created mode 0644 (world-readable), and O_NOFOLLOW is absent, so a symlink planted at the path is followed when the segment is attached.
A "Shared" segment naturally lives in a shared directory such as /tmp or /dev/shm, where any local user can read the IPC payloads stored in the world-readable segment, and a pre-planted symlink at the path redirects the open to another file. |
| Dell Device Management Agent, versions prior to DDMA 26.05, contain an Improper Link Resolution Before File Access ('Link Following’) vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| BuildKit's cache mount source= selector on Windows Container on Windows (WCOW) workers does not detect NTFS directory junctions placed inside the cache root. A build authored by an untrusted user on a WCOW-configured BuildKit daemon can read arbitrary host files reachable to the BuildKit daemon process. |
