| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing validation of the outer content_type byte on TLS 1.3 encrypted records in s2n-tls allows an active man-in-the-middle to silently discard individual application data records without either endpoint detecting the modification. RFC 8446 Section 5.2 requires that the outer content_type of all encrypted TLS 1.3 records must be application_data (0x17). The s2n-tls AEAD implementation hardcodes this value in the additional authenticated data rather than using the actual wire byte, so the outer content_type is not covered by the authentication tag.
This enables selective suppression of application data. In HTTP pipelining scenarios, dropping a TLS record containing an HTTP request can cause request/response desynchronization, where subsequent responses are delivered to the wrong requests. In write-heavy workloads, a dropped record containing a write request can result in undetectable data loss when the client interprets a subsequent success response as confirmation of the dropped write.
All TLS 1.3 connections are affected. Both TLS clients and servers are affected. TLS 1.2 and QUIC connections are not affected.
We recommend you upgrade s2n-tls to version v1.7.6 |
| Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42)
peer key, the peer key is not properly checked for the subgroup membership.
Impact summary: A malicious peer which presents an X9.42 key carrying the
victim's p and g parameters, a forged q = r (a small prime factor of the
cofactor (p−1)/q_local), and a public value Y of order r can recover the
victim's private key after a small number of key exchange attempts.
When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the
subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's
own q parameter, not the local key's q. The peer's domain parameters are
then matched against the domain parameters of the private key, but the value
of q is not compared.
A malicious peer who presents an X9.42 key carrying the victim's p, g,
a forged q = r (a small prime factor of the cofactor), and a public
value Y of order r passes all checks. The shared secret then takes only
r distinct values, leaking priv mod r. Repeating for each small-prime
factor of the cofactor and combining via CRT recovers the full private
key (Lim–Lee / small-subgroup-confinement attack).
The realistic attack surface is narrow: principally CMP deployments with
long-lived RA/CA DHX keys and bespoke enterprise or government applications
using X9.42 DHX static keys with interactive protocols and therefore this
issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, 3.1.2 and 3.0 are affected by this
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject descriptors with oversized CRC length
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block. |
| An Improper Validation of Integrity Check Value and Improper Certificate Validation in certain ASUS router models allows a remote man-in-the-middle(MITM) user to make the router download and execute arbitrary command via a spoofed server.
Refer to the '
Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. |
| A denial-of-service security issue exists across all the 1756-EN2, EN3, and ENBT communication module due to improper validation of CIP Implicit Connection packets. An attacker on the network can exploit this by sending crafted packets to continuously disrupt device connections, though device connections will recover immediately after. |
| wc_Blake2bHmacFinal and wc_Blake2sHmacFinal discard the message when the key length exceeds the block size, producing a MAC that is independent of the input. When the supplied key is longer than the BLAKE2 block size the key-hashing branch reinitialized the running hash state, discarding the accumulated message data, so the resulting MAC depended only on the key and not on the message being authenticated. This bug is specific to the HMAC-BLAKE2 APIs that were added in wolfSSL version 5.9.0. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm's tarball extraction worker skips integrity verification when the integrity field is absent from the lockfile resolution. If an attacker can both modify pnpm-lock.yaml to remove the integrity: field and cause the referenced registry URL to serve altered package content, pnpm install --frozen-lockfile can install the altered package without an integrity error. npm's npm ci enforces integrity by default; pnpm's behavior of silently skipping verification is a pnpm-specific fail-open gap. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| Mastodon is a free, open-source social network server based on ActivityPub. From 4.3.0 until 4.5.11 and 4.4.18, Mastodon has a feature to let websites credit authors of their articles. To prevent false attribution claims, Mastodon uses the attributionDomains JSON-LD term, however, an error in how it is defined makes Linked Data Signatures on the toot:attributionDomains property ineffective. An attacker can arbitrarily modify the attributionDomains value of a legitimately signed Update activity and bypass Mastodon’s signature verification. This vulnerability is fixed in 4.5.11 and 4.4.18. |
| Mastodon is a free, open-source social network server based on ActivityPub. Prior to 4.5.10, 4.4.17, and 4.3.23, Mastodon's normalization of incoming activities signed with Linked-Data Signatures does not sufficiently protect the activities from a certain class of spoofing, allowing threat actors to remove JSON entries from valid signed activities from a third-party actor. This vulnerability is fixed in 4.5.10, 4.4.17, and 4.3.23. |
| Improper Validation of Integrity Check Value vulnerability in Apache APISIX.
The jwe-decrypt plugin under default configuration is vulnerable to authentication bypass.
This issue affects Apache APISIX: from 3.8.0 through 3.16.0.
Users are recommended to upgrade to version 3.17.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: skip ipv6 extension headers for csum checks
Protocol checksum validation fails for IPv6 if there are extension
headers before the protocol header. iph->len already contains its
offset, so use it to fix the problem. |
| A security issue exists within 1769 CompactLogix controllers due to the missing validation of sequence numbers and source IP addresses in the CIP protocol. This allows attacker to abuse the exposed Connection ID’s visible on the web interface to perform denial-of-service attacks, resulting in a minor fault. |
| Issue Summary: The PKCS#12 file processing fails to perform sufficient input
validation for files that use Password-Based Message Authentication Code 1
(PBMAC1) integrity mechanism allowing a certificate and private key forgery.
Impact Summary: An attacker impersonating a user can cause a service reading
PKCS#12 files to accept forged certificates and private keys with a 1 in 256
probability.
If a service accepting PKCS#12 files is using passwords for authenticating
the received files, the attacker can create unencrypted PKCS#12 files that
use PBMAC1 authentication that specifies an HMAC key of only one byte, allowing
them to craft a file that will be accepted with a 1 in 256 probability.
That would then cause the service to accept a certificate and private key
controlled by the attacker.
The FIPS modules are not affected by this issue, as the affected code is
outside the OpenSSL FIPS module boundary. |
| Issue Summary: Cryptographic Message Services (CMS) processing fails to perform
sufficient input validation on the cipher and tag length fields of
AuthEnvelopedData containers, leading to various potential compromises.
Impact Summary: Attackers making use of these vulnerabilities may achieve
key-equivalent functionality for a given CMS recipient and/or bypass integrity
validation for a given message.
In one use case, an attacker may send a CMS message containing
AuthEnvelopedData with the cipher specified as a non-AEAD cipher. OpenSSL
erroneously allows this selection, and attempts to decrypt and validate the
message.
An on-path attacker who captures one legitimate AES-GCM AuthEnvelopedData
addressed to the victim can re-emit it with the recipientInfos set left
byte-for-byte intact, so the victim's private key still unwraps the genuine CEK
(the content-encryption key), but with the inner OID rewritten to AES-256-OFB
(Output Feedback Mode, an unauthenticated keystream mode) and with an
attacker-chosen IV and ciphertext. The victim initializes AES-256-OFB under the
real CEK, never consults the MAC field, and CMS_decrypt() returns success.
If the application under attack responds to the attacker with any indicator
showing success or failure of the decryption effort, it is possible for the
attacker to use this as an oracle to obtain key equivalent functionality for the
CEK used for the chosen recipient of the message.
In another use case, an attacker can reduce the tag length of the chosen AEAD
cipher for a given AuthEnvelopedData container to be a single byte long,
allowing an attacker to brute force CMS decryption, producing an integrity
bypass for applications that trust CMS_decrypt() to reject modified content.
The FIPS modules are not affected by this issue. |
| Insufficient policy enforcement in Subresource Integrity in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to bypass content security policy via malicious network traffic. (Chromium security severity: Medium) |
| Missing integrity verification in the Triton inference handler in Amazon SageMaker Python SDK v2 before v2.257.2 and v3 before v3.8.0 might allow a remote authenticated actor to achieve code execution in inference containers via replacement of model artifacts in S3 with a specially crafted pickle payload that is deserialized without verification. This issue requires a remote authenticated actor with S3 write access to the model artifact path.
To remediate this issue, we recommend upgrading to Amazon SageMaker Python SDK v2.257.2 or v3.8.0 and rebuild any Triton models previously created with ModelBuilder using the updated SDK. |
| Next.js is a React framework for building full-stack web applications. From 13.4.6 to before 15.5.16 and 16.2.5, React Server Component responses can be vulnerable to cache poisoning in deployments that rely on shared caches with insufficient response partitioning. In affected conditions, collisions in the _rsc cache-busting value can allow an attacker to poison cache entries so users receive the wrong response variant for a given URL. This vulnerability is fixed in 15.5.16 and 16.2.5. |
| SP1 is a zero‑knowledge virtual machine that proves the correct execution of programs compiled for the RISC-V architecture. In versions 6.0.0 through 6.0.2, a soundness vulnerability in the SP1 V6 recursive shard verifier allows a malicious prover to construct a recursive proof from a shard proof that the native verifier would reject. Version 6.1.0 fixes the issue. |
| RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature. |
| The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust. |
