| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In NLnet Labs Unbound up to and including version 1.25.1, when the validator builds the canonical RDATA form for an RRSIG-covered PX/RP/MINFO/SOA RRset, it computes the address of the second embedded domain name as 'datstart + dname_valid(datstart, ...)' and passes it straight to 'query_dname_tolower()' without checking that a second name is actually present in the RDATA. The wire-format parser accepts multi-dname RRs whose RDATA ends after the first name, so an attacker who runs a DNSSEC-signed authoritative server can deliver a record with an absent second domain name (e.g. SOA record) and cause 'query_dname_tolower()' to walk label-by-label through stale bytes in the per-worker 'env->scratch_buffer', past the end of that heap allocation if 'msg-buffer-size' has been lowered from the default. This leads to heap buffer overflow and on a release build the outcome relies heavily on the contents of the buffer tail and the adjacent heap chunk. |
| In NLnet Labs Unbound 1.6.0 up to and including 1.25.1, a replay of a wildcard rrset as another piece of data, could be briefly considered DNSSEC secure based only on the RRSIG validation and stored into cache, before later validation treats it as bogus based on NSEC validation. When the resolving thread puts secure on the rrset, and another thread that is on the serve expired path then picks up the updated rrset contents with the secure status for a reply, it can be used to change a specific record, next to a wildcard that could be covered by the wildcard, into the wildcard. A malicious actor can exploit the possible poisonous effect by having any DNSSEC-singed domain (irrelevant to the victim domain) and a CNAME wrapper record that points to a record next to a wildcard (that could be covered by the wildcard). Then quering Unbound for the wildcard sibling record would seed the secure message. A later (after expiry) query for the CNAME wrapper would need to resolve the target sibling record. If the wildcard replay is injected into the response, the wildcard rrset will update the expired sibling record with a secure status before completing proper wildcard validation with NSEC records and eventually treating the CNAME wrapper answer as bogus. The updated poisoned rrset is now secure and points to the wildcard. This vulnerability is explicit for the serve expired path and needs injection of the signed wildcard rrset without the NSEC accompanying rrset. |
| An Improper Validation of Integrity Check Value and Improper Certificate Validation in certain ASUS router models allows a remote man-in-the-middle(MITM) user to make the router download and execute arbitrary command via a spoofed server.
Refer to the '
Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information. |
| djangoSIGE through 1.10 (commit a6fe7e8) contains a cross-site request forgery vulnerability that allows unauthenticated attackers to cancel sales or purchase orders on behalf of authenticated users by exploiting order-cancellation logic implemented inside HTTP GET method handlers in CancelarOrcamentoVendaView, CancelarPedidoVendaView, CancelarOrcamentoCompraView, and CancelarPedidoCompraView. Attackers can lure an authenticated victim with change_orcamentovenda or equivalent permissions to a page containing a cross-origin reference such as an img tag pointing to the cancellation endpoint, bypassing CSRF token validation entirely since Django's CsrfViewMiddleware only enforces CSRF checks on unsafe HTTP methods. |
| Missing validation of the outer content_type byte on TLS 1.3 encrypted records in s2n-tls allows an active man-in-the-middle to silently discard individual application data records without either endpoint detecting the modification. RFC 8446 Section 5.2 requires that the outer content_type of all encrypted TLS 1.3 records must be application_data (0x17). The s2n-tls AEAD implementation hardcodes this value in the additional authenticated data rather than using the actual wire byte, so the outer content_type is not covered by the authentication tag.
This enables selective suppression of application data. In HTTP pipelining scenarios, dropping a TLS record containing an HTTP request can cause request/response desynchronization, where subsequent responses are delivered to the wrong requests. In write-heavy workloads, a dropped record containing a write request can result in undetectable data loss when the client interprets a subsequent success response as confirmation of the dropped write.
All TLS 1.3 connections are affected. Both TLS clients and servers are affected. TLS 1.2 and QUIC connections are not affected.
We recommend you upgrade s2n-tls to version v1.7.6 |
| Trezor Safe 3, Safe 5, and Safe 7 firmware contains a confirmation-binding flaw in the Ethereum sign_tx / sign_tx_eip1559 flow. For contract interactions, the device confirms only the initial calldata chunk while the signature commits to the full streamed calldata. An attacker could present calldata to a victim then supply a different tail that changes the signed transaction. Fixed in 70c9b0c. |
| Exposure of private personal information to an unauthorized actor in Windows RDP allows an unauthorized attacker to disclose information over a network. |
| Inappropriate implementation in Autofill in Google Chrome on Android prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| A weakness has been identified in geex-arts django-jet up to 1.0.8. Affected is an unknown function of the component OAuth Handler. Executing a manipulation can lead to cross-site request forgery. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check
An unintended behavior in the TCP conntrack state machine allows a
connection to be forced into the CLOSE state using an RST packet with an
invalid sequence number.
Specifically, after a SYN packet is observed, an RST with an invalid SEQ
can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of
whether the RST corresponds to the expected reply direction. The relevant
code path assumes the RST is a response to an outgoing SYN, but does not
validate packet direction or ensure that a matching SYN was actually sent
in the opposite direction.
As a result, a crafted packet sequence consisting of a SYN followed by an
invalid-sequence RST can prematurely terminate an active NAT entry. This
makes connection teardown easier than intended.
So, tighten the state transition logic to ensure that RST-triggered
CLOSE transitions only occur when the RST is a valid response to a
previously observed SYN in the correct direction. |
| Network-AI, a TypeScript/Node.js multi-agent orchestrator, has a shipped, exported, documented feature called `ApprovalInbox` (`lib/approval-inbox.ts`). It is the network surface of the human-in-the-loop Approval Gate, which `ApprovalGate` uses to require explicit human approval for high-risk operations. The HTTP server it exposes has no authentication of any kind and sets `Access-Control-Allow-Origin: *` on every route, including the state-changing `POST /approvals/:id/approve` and `/deny`. As a result, in versions 5.0.0 through 5.12.1, any party who can send an HTTP request to the inbox port — a co-located process, a container/SSRF on the same host, a remote client when the operator binds a non-loopback address, or any website the operator visits in a browser (via the wildcard CORS) — can enumerate pending approvals and approve them, defeating the entire human-in-the-loop control and causing the gated high-risk action (e.g. a shell command the agent was holding for review) to execute without consent. This issue is fixed in v5.12.2. `ApprovalInbox` now accepts a `secret` option. When set, the mutating endpoints `POST /:id/approve` and `POST /:id/deny` require an `Authorization: Bearer <secret>` header, validated in constant time with `crypto.timingSafeEqual`. `startServer()` already binds to `127.0.0.1` by default; operators exposing the inbox on a network must set a secret. |
| A CSRF vulnerability exists in the `zone-include.php` script in Revive Adserver 6.0.7. Linking and unlinking banners or campaigns to zones could be triggered via crafted GET or POST requests without any verification of the CSRF token, allowing an attacker to perform these actions on behalf of an authenticated administrator. |
| The Joomla extension Events Booking prior version 5.8.0 had an frontend file upload endpoint that lacked CSRF protection. |
| dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, the application exposes server-side state changes through `GET` routes. Because browsers automatically send cookies on same-site top-level navigation and Rails does not apply CSRF protections to `GET`, an attacker can force a logged-in victim to modify application state by embedding a link, image, iframe, or redirect to one of these endpoints. This was confirmed on the target with a normal `Standard` account: a cross-site-style `GET` to `watch_lists/:id/add_item?thing_id=...` inserted content into a watch list with no CSRF token. Additional `GET` mutation routes exist in the codebase, including user impersonation for authorized admins and cache or
translation state changes. This is patched in version 26.06.08. |
| Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42)
peer key, the peer key is not properly checked for the subgroup membership.
Impact summary: A malicious peer which presents an X9.42 key carrying the
victim's p and g parameters, a forged q = r (a small prime factor of the
cofactor (p−1)/q_local), and a public value Y of order r can recover the
victim's private key after a small number of key exchange attempts.
When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the
subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's
own q parameter, not the local key's q. The peer's domain parameters are
then matched against the domain parameters of the private key, but the value
of q is not compared.
A malicious peer who presents an X9.42 key carrying the victim's p, g,
a forged q = r (a small prime factor of the cofactor), and a public
value Y of order r passes all checks. The shared secret then takes only
r distinct values, leaking priv mod r. Repeating for each small-prime
factor of the cofactor and combining via CRT recovers the full private
key (Lim–Lee / small-subgroup-confinement attack).
The realistic attack surface is narrow: principally CMP deployments with
long-lived RA/CA DHX keys and bespoke enterprise or government applications
using X9.42 DHX static keys with interactive protocols and therefore this
issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, 3.1.2 and 3.0 are affected by this
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
Sashiko pointed out that the driver could drop PAGE_SIZE from the
pgsize_bitmap. That is technically allowed but nothing does it, and
such an iommu_domain would not be used with the DMA API today.
Still, it is against the design and it is trivial to fix up. Lift
the PT_WARN_ON to the if branch and just skip the fast path. |
| A vulnerability was determined in Sipeed PicoClaw up to 0.2.9. The affected element is an unknown function of the file web/backend/api/auth.go. Executing a manipulation can lead to cross-site request forgery. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This patch is called 4b0229351678f479429b8d8b19207757266f246b. Applying a patch is advised to resolve this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate compress cache inode only when enabled
F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode
number for the compressed page cache inode. That inode only exists when
the compress_cache mount option is enabled.
When compress_cache is disabled, max_nid is outside the valid inode
range. A corrupted directory entry that points to ino == max_nid should
therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino()
currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally,
so f2fs_iget() bypasses do_read_inode() and its nid range check, and
instantiates a fake internal inode instead.
Gate the compressed cache inode case on COMPRESS_CACHE, matching
f2fs_init_compress_inode(). With compress_cache disabled, ino ==
max_nid now follows the normal inode path and is rejected as an
out-of-range nid. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: reject descriptors with oversized CRC length
udf_read_tagged() skips CRC verification when descCRCLength +
sizeof(struct tag) exceeds the block size. A crafted UDF image can
set descCRCLength to an oversized value to bypass CRC validation
entirely; the descriptor is then accepted based solely on the 8-bit
tag checksum, which is trivially recomputable.
Reject such descriptors instead of silently accepting them. A
legitimate single-block descriptor should never have a CRC length that
exceeds the block. |
| The MailerSend WordPress plugin before 1.0.8 does not perform a nonce check on its configuration-delete action (it verifies the manage_options capability but ignores the nonce), so an attacker can trick a logged-in administrator into visiting a crafted page that wipes the MailerSend WordPress plugin before 1.0.8's SMTP configuration and deactivates the MailerSend WordPress plugin before 1.0.8, breaking the site's email delivery. |
