| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req
When fuse_resend() moves a request from fpq->processing back to
fiq->pending, it sets FR_PENDING and clears FR_SENT but does not
remove the requests intr_entry from fiq->interrupts. If the
request had FR_INTERRUPTED set from a prior signal, intr_entry
remains dangling on fiq->interrupts. When the requesting task
then receives a fatal signal, fuse_remove_pending_req() sees
FR_PENDING=1, removes the request from fiq->pending and frees it
via the refcount path, also without cleaning intr_entry. The
stale intr_entry causes use-after-free when fuse_read_interrupt()
iterates fiq->interrupts:
- list_del_init(&req->intr_entry) -> UAF write on freed slab
- req->in.h.unique -> UAF read, data leaked to userspace
Remove intr_entry from fiq->interrupts in fuse_resend() for
interrupted requests before they are placed back on fiq->pending.
Add a WARN_ON if the intr_entry is not empty on request destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.
tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
red_enqueue() was continuing to operate on an skb it no longer owns in this
case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.
tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10
tc filter add block 10 ... action ct
(with ct defrag enabled and traffic that produces out-of-order
fragments, e.g. a fragmented UDP stream)
Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress
and egress fast paths do: treat it as stolen and return NULL without
touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be
dropped/freed here, as it is no longer owned by us. |
| In the Linux kernel, the following vulnerability has been resolved:
6lowpan: fix NHC entry use-after-free on error path
lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding
lowpan_nhc_lock. If the descriptor has no uncompress callback, the error
path drops the lock before printing nhc->name.
lowpan_nhc_del() removes descriptors under the same lock and then relies
on synchronize_net() before the owning module can be unloaded. That only
waits for net RX RCU readers. lowpan_header_decompress() is also exported
and can be reached from callers that are not necessarily covered by the net
core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive
path.
This leaves a race where one task drops lowpan_nhc_lock in the error path,
another task unregisters and frees the matching descriptor after
synchronize_net() returns, and the first task then dereferences nhc->name
for the warning.
With the post-unlock window widened, KASAN reports:
BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220
Read of size 8
lowpan_nhc_do_uncompression
lowpan_header_decompress
Fix this by printing the warning before dropping lowpan_nhc_lock, so the
descriptor name is read while unregister is still excluded. The malformed
packet is still rejected with -ENOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: krb5 - filter out async aead implementations at alloc
krb5_aead_encrypt(), krb5_aead_decrypt() in rfc3961_simplified.c and
rfc8009_encrypt(), rfc8009_decrypt() in rfc8009_aes2.c set a NULL
completion callback and treat any negative return from
crypto_aead_{encrypt,decrypt}() as terminal, falling through to
kfree_sensitive(buffer). When the encrypt_name resolves to an
async AEAD instance the request returns -EINPROGRESS, the buffer
is freed while the backend's worker still holds a pointer, and the
worker dereferences the freed slab on completion.
KASAN report under UML+SLUB with a synthetic async aead backend
bound to krb5->encrypt_name:
BUG: KASAN: slab-use-after-free in t5_stub_complete+0x7d/0xc7
The helpers were written synchronously, so filter the async
instances out at allocation time instead of plumbing
crypto_wait_req() through every call site.
Reachable via net/rxrpc/rxgk.c, fs/afs/cm_security.c and
net/ceph/crypto.c on systems with an async AEAD provider bound to
the krb5 enctype name. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of a deferred file_lock on SMB2_CLOSE then SMB2_CANCEL
Commit f580d27e8928 ("ksmbd: fix use-after-free of a deferred file_lock on
double SMB2_CANCEL") made smb2_cancel() skip a work whose state is
KSMBD_WORK_CANCELLED, so its cancel_fn cannot be fired a second time. But
KSMBD_WORK has three states (ACTIVE, CANCELLED, CLOSED), and the same
freeing producer path is reached for CLOSED too:
SMB2_CLOSE on the locking handle -> set_close_state_blocked_works() sets
the deferred work's state to KSMBD_WORK_CLOSED and wakes the smb2_lock()
worker. The worker takes the non-ACTIVE early-exit, locks_free_lock()s
the file_lock and, because the state is not KSMBD_WORK_CANCELLED, takes
the STATUS_RANGE_NOT_LOCKED branch with "goto out2" -- which, like the
cancelled branch, skips release_async_work(). The work stays on
conn->async_requests with a live cancel_fn = smb2_remove_blocked_lock
pointing at the freed file_lock.
A subsequent SMB2_CANCEL for the same AsyncId then passes the
KSMBD_WORK_CANCELLED-only guard (its state is KSMBD_WORK_CLOSED), so
smb2_cancel() fires cancel_fn again over the freed file_lock -- the same
use-after-free fixed, via SMB2_CLOSE instead of a first SMB2_CANCEL:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (non-ACTIVE early-exit)
... cache file_lock_cache of size 192
Reproduced on mainline 7.1-rc7 (which already contains f580d27e8928) with
KASAN by an authenticated SMB client; the double-SMB2_CANCEL control is
silent on that kernel, so the splat is attributable to the CLOSE trigger.
Only an ACTIVE deferred work may have its cancel_fn fired: both terminal
states (CANCELLED and CLOSED) reach the smb2_lock() early-exit that frees
the file_lock and skips release_async_work(). Guard on KSMBD_WORK_ACTIVE
so any non-active work is skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix race between dump and ip_set_list resize
The release path of ip_set_dump_do() and ip_set_dump_done() read
inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw()
of the array pointer. These run from netlink_recvmsg() without the nfnl
mutex and without an RCU read-side critical section.
A concurrent ip_set_create() can grow the array: it publishes the new
array, calls synchronize_net() and then kvfree()s the old one. Since the
dump paths read the array outside any RCU reader, synchronize_net() does
not wait for them and the old array can be freed while they still index
into it, causing a use-after-free.
The dumped set itself stays pinned via set->ref_netlink, so only the
array load needs protecting. Take rcu_read_lock() around it, matching
ip_set_get_byname() and __ip_set_put_byindex().
BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
Read of size 8 at addr ffff88800b5c4018 by task exploit/150
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697)
netlink_dump (net/netlink/af_netlink.c:2325)
netlink_recvmsg (net/netlink/af_netlink.c:1976)
sock_recvmsg (net/socket.c:1159)
__sys_recvfrom (net/socket.c:2315)
...
Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7]
RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink()
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers. |
| Use after free in Core in Google Chrome on Windows prior to 150.0.7871.125 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| In the Linux kernel, the following vulnerability has been resolved:
usbip: vudc: Fix use after free bug in vudc_remove due to race condition
This patch follows up Zheng Wang's 2023 report of a use-after-free in
vudc_remove(). The original thread stalled on Shuah Khan's request for
runtime testing of the unplug/unbind path. This patch supplies that
testing and keeps Zheng's original fix shape.
In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer().
usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer().
vudc_remove() can then free the containing struct vudc while the timer is
still pending or executing.
KASAN confirms the race on an unpatched x86_64 QEMU guest with
CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop
that repeatedly writes a socket fd to usbip_sockfd, closes the socket
pair, and unbinds/rebinds usbip-vudc.0:
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0
Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239
Allocated by task 239:
vudc_probe+0x4d/0xaa0
Freed by task 239:
kfree+0x18f/0x520
device_release_driver_internal+0x388/0x540
unbind_store+0xd9/0x100
This lands in the timer core rather than v_timer() itself because the
embedded timer_list is being walked after its containing struct vudc has
already been freed. The underlying lifetime bug is the same one Zheng
reported.
With v_stop_timer() called from vudc_remove() and the timer deleted
synchronously, the same harness completed 5000 bind/unbind iterations
with no KASAN report. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Fix use-after-free in omap2430_probe()
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: fix use-after-free in error path
In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code
was using list_for_each_entry() to iterate through buffers while calling
iio_buffer_put() which can free the current buffer if refcount drops to 0.
The list_for_each_entry() loop macro then evaluates buf->head.next to
continue iteration, accessing the freed buffer.
Fix this by using list_for_each_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table()
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: refresh tcphdr after skb_ensure_writable
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix UAF via dangling GEM handle in create_bo
rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via
drm_gem_handle_create() early on, then performs several operations that
can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after
the handle is live, the error path calls drm_gem_shmem_object_free()
which kfree's the object without removing the handle from the IDR.
This leaves a dangling handle pointing to freed slab memory. Any
subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls
drm_gem_object_lookup() and dereferences freed memory (UAF).
Fix by moving drm_gem_handle_create() to after all fallible operations
succeed, matching the pattern used by panfrost, lima, and etnaviv.
Also fix drm_mm_insert_node_generic() whose return value was silently
overwritten by iommu_map_sgtable() on the next line. Add the missing
error check.
[tomeu: Move handle creation to the very end] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable reconnect error path file lifetime
After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes
the same ksmbd_file into the session volatile-id table. If smb2_open()
then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp)
and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp).
In this case fp and dh_info.fp are the same object. The first put drops the
reconnect lookup reference, but the final durable put can run
__ksmbd_close_fd(NULL, fp). Because the final close is not session-aware,
it can free the file object without removing the volatile-id entry that was
just published into the session table.
Use the session-aware put for the final reconnect drop when the reconnect
had already succeeded and the error path is cleaning up the republished
file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep
using the durable-only put path. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: pop cached request if it is usable
When submitting a bio to blk-mq, if the task should sleep after peeking
a cached request, but before it pops it, the plug flushes and calls
blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a
use-after-free bug. Fix this by popping the cached request before any
possible blocking calls if it is suitable for use.
Popping this request first holds a queue reference, so avoid any
serialization races with queue freezes and can safely proceed with
dispatching that request to the driver. This potentially increases a
timing window from when a driver wants to freeze its queue to when
requests stop being dispatched. That scenario is off the fast path
though, and drivers need to appropriately handle requests during a
freeze request anyway.
The downside is the popped element needs to be individually freed when
we performed a bio plug merge. The cached request would have had to be
freed later anyway, but this patch does it inline with building the plug
list instead of after flushing it. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: fix a potential use-after-free
On error we free aggr->lookups->dev_id before removing the entry from
the lookup table. If a concurrent thread calls gpiod_find() before we
remove the entry, it could iterate over the list and call
gpiod_match_lookup_table() which unconditionally dereferences dev_id
when calling strcmp(). Reverse the order of cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod. |
