| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: fix disconnect UAF in client teardown
usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each
auxiliary device. auxiliary_device_uninit() drops the device reference, and
for an unbound child that can run usbio_auxdev_release() and free the
containing struct usbio_client.
list_for_each_entry_reverse() advances after the loop body by reading
client->link.prev. If the current client is freed by
auxiliary_device_uninit(), the iterator dereferences freed memory.
Use list_for_each_entry_safe_reverse() so the previous client is
cached before the body can drop the final reference. This preserves
reverse teardown order while keeping the next iterator cursor independent
of the current client's lifetime.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? usbio_disconnect+0x12e/0x150
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? usbio_disconnect+0x12e/0x150
kasan_report+0xe0/0x110
? usbio_disconnect+0x12e/0x150
usbio_disconnect+0x12e/0x150
usb_unbind_interface+0xf3/0x400
really_probe+0x316/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? _raw_spin_unlock_irqrestore+0x44/0x60
? srso_alias_return_thunk+0x5/0xfbef5
? lockdep_hardirqs_on_prepare+0xea/0x1a0
? srso_alias_return_thunk+0x5/0xfbef5
? usb_enable_lpm+0x3c/0x260
usb_set_configuration+0xb64/0xf20
usb_generic_driver_probe+0x5f/0x90
usb_probe_device+0x71/0x1b0
really_probe+0x46b/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? add_device_randomness+0xb7/0xf0
usb_new_device+0x492/0x870
hub_event+0x1b10/0x29c0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x187/0x300
? process_one_work+0x475/0xb90
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on marvell probe failure
Make sure to stop any TX URBs submitted during Marvell OOB wakeup
configuration on later probe failures to avoid use-after-free in the
completion callback.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix MLE defragmentation
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
The struct pernet_operations docstring in include/net/net_namespace.h
explicitly warns against blocking RCU primitives in .exit handlers:
Exit methods using blocking RCU primitives, such as
synchronize_rcu(), should be implemented via exit_batch.
[...]
Please, avoid synchronize_rcu() at all, where it's possible.
Note that a combination of pre_exit() and exit() can
be used, since a synchronize_rcu() is guaranteed between
the calls.
xfrm_policy_fini() violates this: it calls synchronize_rcu() before
freeing the policy_bydst hash tables (so no RCU reader is mid-
traversal at free time), but runs from xfrm_net_ops.exit -- once per
namespace -- so a cleanup_net() of N namespaces pays N full RCU
grace periods serially.
Use the documented pre_exit/exit split. Move the policy flush (and
the workqueue drains it depends on) into a new .pre_exit handler;
xfrm_policy_fini() then runs in .exit and frees the hash tables
after the synchronize_rcu_expedited() that cleanup_net() guarantees
between the two phases. Providing O(1) RCU grace periods per batch
instead of O(N).
Observed on Linux 6.18 with a workload doing unshare(CLONE_NEWNET)
at ~13/sec sustained: cleanup_net() and the netns_wq rescuer kthread
both stuck in xfrm_policy_fini()'s synchronize_rcu(), >300k struct
net accumulated in the cleanup queue, Percpu in /proc/meminfo climbed
to 130+ GB on 256-CPU hosts, and memcg OOMs followed. setup_net and
__put_net counts were balanced, ruling out a refcount leak. |
| Use after free in V8 in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: Medium) |
| FreeRDP before 3.29.0 contains client-side heap use-after-free vulnerabilities in the async update message proxy for RAIL WINDOW_STATE_ORDER and NOTIFY_ICON_STATE_ORDER when AsyncUpdate is enabled. When a malicious or compromised RDP server sends crafted update orders, the message proxy shallow-copies structures containing nested parser-owned pointers (e.g., titleInfo.string, windowRects, visibilityRects, icon buffers). The parser frees those nested buffers after the callback returns, so the queued async message later dispatches stale pointers, potentially causing memory corruption or a client crash. |
| sqlite3 provides Ruby bindings for the SQLite3 embedded database. In version 2.9.4 and earlier, redefining a SQLite function with a different arity frees the previously registered function handler while SQLite may still reference it, resulting in a use-after-free. This issue is fixed in version 2.9.5. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: fix hardware state machine corruption in error path
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity-fec: fix reading parity bytes split across blocks (take 3)
fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset
operations, preventing concurrent dump-and-reset from underrunning
values.
The lock is taken before fetching the total so that two parallel
resets cannot both read the same counter values and then both
subtract them.
A global lock is used for simplicity since resets are infrequent.
If this becomes a bottleneck, it can be replaced with a per-net
lock later. |
| Untrusted Pointer Dereference in ASUS System Control Interface v3, ASUS System Control Interface, and ASUS Business Manager allows a local administrator to perform arbitrary physical memory read and write operations via crafted IOCTL requests to the driver, bypassing OS-enforced memory protections.
Refer to the '
Security Update for ASUS System Control Interface ' section on the ASUS Security Advisory for more information. |
| Bridge is affected by an Untrusted Pointer Dereference vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In JetBrains PyCharm before 2026.1.4, 2026.2 arbitrary code execution via malicious Python executable was possible on untrusted project open |
| In the Linux kernel, the following vulnerability has been resolved:
srcu: Don't queue workqueue handlers to never-online CPUs
While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: re-lock request before returning from fuse_ref_folio()
fuse_ref_folio() unlocks the request but does not re-lock it before
returning. fuse_chan_abort() can end the request and the async end
callback (eg fuse_writepage_free()) can free the args while the
subsequent copy chain logic after fuse_ref_folio() accesses them,
leading to use-after-free issues.
Fix this by locking the request in fuse_ref_folio() before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/aux: Fix page UAF in map_range()
map_range() reads rb->aux_pages[], rb->aux_nr_pages and rb->aux_pgoff via
perf_mmap_to_page() while holding only event->mmap_mutex. Those fields are
serialized by rb->aux_mutex, and mmap_mutex is per event.
Thus, two events sharing one rb via PERF_EVENT_IOC_SET_OUTPUT can race
rb_alloc_aux() with map_range(), leading to a page-UAF scenario as follows:
CPU 0 CPU 1
===== =====
rb_alloc_aux() map_range()
[1]: allocate rb->aux_pages[0]
[2]: rb->aux_nr_pages++
[3]: perf_mmap_to_page()
returns rb->aux_pages[0]
[4]: map it as VM_PFNMAP
[5]: rb->aux_pgoff = 1
munmap the page
[6]: free rb->aux_pages[0]
Pages mapped as VM_PFNMAP have no refcount protection, so CPU 1 holds a
mapping to a freed physical frame.
Fix this by taking rb->aux_mutex across the page walk in map_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ldusb: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
When init (zeroing) on allocation is requested, for kmalloc() we
generally have to zero the full object size even if a smaller size is
requested, in order to provide krealloc()'s __GFP_ZERO guarantees.
But if we track the requested size, krealloc() uses that information to
do the right thing, so we can zero only the requested size. With red
zoning also enabled, any extra size became part of the red zone, so it
must not be zeroed and thus we must zero only the requested size.
However the current check is imprecise, and will trigger also when only
SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking
the requested size). This means enabling red zoning alone can compromise
krealloc()'s __GFP_ZERO contract.
Fix this by using slub_debug_orig_size() instead, which is the exact
check for whether the requested size is tracked. We don't need to care
if red zoning is also enabled or not. Also update and expand the
comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix UAF in bt_accept_dequeue()
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths. |
