| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix cwnd update ordering
After a reconnect, the reply handler is opening the cwnd (and thus
enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs()
can post enough Receive WRs to receive their replies. This causes an
RNR and the new connection is lost immediately.
The race is most clearly exposed when KASAN and disconnect injection
are enabled. This slows down rpcrdma_rep_create() enough to allow
the send side to post a bunch of RPC Calls before the Receive
completion handler can invoke ib_post_recv(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix masking negation logic upon negative dst register
The negation logic for the case where the off_reg is sitting in the
dst register is not correct given then we cannot just invert the add
to a sub or vice versa. As a fix, perform the final bitwise and-op
unconditionally into AX from the off_reg, then move the pointer from
the src to dst and finally use AX as the source for the original
pointer arithmetic operation such that the inversion yields a correct
result. The single non-AX mov in between is possible given constant
blinding is retaining it as it's not an immediate based operation. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nftables: clone set element expression template
memcpy() breaks when using connlimit in set elements. Use
nft_expr_clone() to initialize the connlimit expression list, otherwise
connlimit garbage collector crashes when walking on the list head copy.
[ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables]
[ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount]
[ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83
[ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297
[ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000
[ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0
[ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c
[ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001
[ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000
[ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000
[ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0
[ 493.064733] Call Trace:
[ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount]
[ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables] |
| In the Linux kernel, the following vulnerability has been resolved:
ch_ktls: Fix kernel panic
Taking page refcount is not ideal and causes kernel panic
sometimes. It's better to take tx_ctx lock for the complete
skb transmit, to avoid page cleanup if ACK received in middle. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use correct permission flag for mixed signed bounds arithmetic
We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
The conclusion "j1939_session_deactivate() should be called with a
session ref-count of at least 2" is incorrect. In some concurrent
scenarios, j1939_session_deactivate can be called with the session
ref-count less than 2. But there is not any problem because it
will check the session active state before session putting in
j1939_session_deactivate_locked().
Here is the concurrent scenario of the problem reported by syzbot
and my reproduction log.
cpu0 cpu1
j1939_xtp_rx_eoma
j1939_xtp_rx_abort_one
j1939_session_get_by_addr [kref == 2]
j1939_session_get_by_addr [kref == 3]
j1939_session_deactivate [kref == 2]
j1939_session_put [kref == 1]
j1939_session_completed
j1939_session_deactivate
WARN_ON_ONCE(kref < 2)
=====================================================
WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70
CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:j1939_session_deactivate+0x5f/0x70
Call Trace:
j1939_session_deactivate_activate_next+0x11/0x28
j1939_xtp_rx_eoma+0x12a/0x180
j1939_tp_recv+0x4a2/0x510
j1939_can_recv+0x226/0x380
can_rcv_filter+0xf8/0x220
can_receive+0x102/0x220
? process_backlog+0xf0/0x2c0
can_rcv+0x53/0xf0
__netif_receive_skb_one_core+0x67/0x90
? process_backlog+0x97/0x2c0
__netif_receive_skb+0x22/0x80 |
| In the Linux kernel, the following vulnerability has been resolved:
media: aspeed: fix clock handling logic
Video engine uses eclk and vclk for its clock sources and its reset
control is coupled with eclk so the current clock enabling sequence works
like below.
Enable eclk
De-assert Video Engine reset
10ms delay
Enable vclk
It introduces improper reset on the Video Engine hardware and eventually
the hardware generates unexpected DMA memory transfers that can corrupt
memory region in random and sporadic patterns. This issue is observed
very rarely on some specific AST2500 SoCs but it causes a critical
kernel panic with making a various shape of signature so it's extremely
hard to debug. Moreover, the issue is observed even when the video
engine is not actively used because udevd turns on the video engine
hardware for a short time to make a query in every boot.
To fix this issue, this commit changes the clock handling logic to make
the reset de-assertion triggered after enabling both eclk and vclk. Also,
it adds clk_unprepare call for a case when probe fails.
clk: ast2600: fix reset settings for eclk and vclk
Video engine reset setting should be coupled with eclk to match it
with the setting for previous Aspeed SoCs which is defined in
clk-aspeed.c since all Aspeed SoCs are sharing a single video engine
driver. Also, reset bit 6 is defined as 'Video Engine' reset in
datasheet so it should be de-asserted when eclk is enabled. This
commit fixes the setting. |
| The issue was addressed with improved checks. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.8, macOS Sonoma 14.8.7, macOS Sonoma 14.8.8, macOS Tahoe 26.5, visionOS 26.5. Processing a maliciously crafted file may lead to unexpected app termination. |
| A malicious actor with access to the network could exploit an Improper Input Validation vulnerability found in UniFi OS devices to execute a Command Injection. |
| Insufficient validation of untrusted input in WebShare in Google Chrome on Android prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient data validation in PDF in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient validation of untrusted input in Chrome for iOS in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient validation of untrusted input in Chrome for iOS in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Low) |
| The Adminify WordPress plugin before 4.2.10 does not perform per-user read-capability checks on the results returned by one of its administration search features, allowing users with a low-privilege role (Contributor) to disclose non-public content that WordPress would not otherwise expose to them, such as other authors' unpublished post titles, pending comment content, the site's Adminify WordPress plugin before 4.2.10 inventory, and user account names. |
| An improper validation vulnerability for driver `GFAC_Sys_x64.sys` in Little Orbit GFAC allows a local attacker to escalate privileges to SYSTEM and execute arbitrary code in kernel mode via crafted messages sent through a Minifilter communication port. |
| The Notifications for Forms & WordPress Actions WordPress plugin before 2.6 does not validate a user-supplied value before using it to build a server-side file inclusion path, allowing authenticated users with subscriber-level access and above to include and execute arbitrary local PHP files on the server. |
| The Everest Forms WordPress plugin before 3.5.0 does not reliably delete temporary CSV files generated during email-notification processing and leaves them publicly accessible in the uploads directory, allowing unauthenticated attackers to retrieve other users' form submission records via predictable, enumerable filenames. |
| Improper access control in SmartThingsKit prior to SMR Jul-2026 Release 1 allows local attackers to access sensitive information. |
| The Kirki WordPress plugin before 6.0.12 does not validate a user-supplied URL before requesting it server-side, allowing unauthenticated attackers to make the site issue HTTP requests to arbitrary hosts (Server-Side Request Forgery). |
| This High severity Information Disclosure vulnerability was introduced in versions 7.17.0, 7.19.0, 8.5.0, 8.9.0, 9.0.1, 9.1.0, 9.2.0, 10.0.2, 10.1.0, and 10.2.0 of Confluence Data Center.
This Information Disclosure vulnerability, with a CVSS Score of 8.2, allows an unauthenticated attacker to view sensitive information via an Information Disclosure vulnerability.
Atlassian recommends that Confluence Data Center customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions:
Confluence Data Center 9.2: Upgrade to a release greater than or equal to 9.2.22
Confluence Data Center 10.2: Upgrade to a release greater than or equal to 10.2.14
See the release notes ([https://confluence.atlassian.com/doc/confluence-release-notes-327.html]). You can download the latest version of Confluence Data Center from the download center ([https://www.atlassian.com/software/confluence/download-archives]).
This vulnerability was reported via our Atlassian (Internal) program. |
