| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Linksys EtherFast Cable/DSL BEFSR11, BEFSR41 and BEFSRU31 with the firmware 1.42.7 upgrade installed opens TCP port 5678 for remote administration even when the "Block WAN" and "Remote Admin" options are disabled, which allows remote attackers to gain access. |
| Linksys WRT54G Wireless-G Broadband Router allows remote attackers to bypass access restrictions and conduct unauthorized operations via a UPnP request with a modified InternalClient parameter, which is not validated, as demonstrated by using AddPortMapping to forward arbitrary traffic. |
| Atmel Firmware 1.3 Wireless Access Point (WAP) allows remote attackers to cause a denial of service via a SNMP request with (1) a community string other than "public" or (2) an unknown OID, which causes the WAP to deny subsequent SNMP requests. |
| Buffer overflow in the Web management interface in Linksys BEFW11S4 wireless access point router 2 and BEFSR11, BEFSR41, and BEFSRU31 EtherFast Cable/DSL routers with firmware before 1.43.3 with remote management enabled allows remote attackers to cause a denial of service (router crash) via a long password. |
| Linksys PSUS4 running firmware 6032 allows remote attackers to cause a denial of service (device crash) via an HTTP POST request containing an unknown parameter without a value. |
| DHCP on Linksys BEFSR11, BEFSR41, BEFSR81, and BEFSRU31 Cable/DSL Routers, firmware version 1.45.7, does not properly clear previously used buffer contents in a BOOTP reply packet, which allows remote attackers to obtain sensitive information. |
| Linksys BEFVP41 VPN Router 2.0 with firmware 1.01.04 allows remote attackers on the local network, to cause a denial of service via IP packets with a null IP option length. |
| Multiple unspecified vulnerabilities in Linksys RT31P2 VoIP router allow remote attackers to cause a denial of service via malformed Session Initiation Protocol (SIP) messages. |
| Linksys WET11 firmware 1.31 and 1.32 allows remote attackers to cause a denial of service (crash) via a packet containing the device's hardware address as the source MAC address in the DLC header. |
| Linksys WRT54G 3.01.03, 3.03.6, 4.00.7, and possibly other versions before 4.20.7, does not verify user authentication until after an HTTP POST request has been processed, which allows remote attackers to (1) modify configuration using restore.cgi or (2) upload new firmware using upgrade.cgi. |
| ezconfig.asp in Linksys WRT54G router 3.01.03, 3.03.6, non-default configurations of 2.04.4, and possibly other versions, uses weak encryption (XOR encoding with a fixed byte mask) for configuration information, which could allow attackers to decrypt the information and possibly re-encrypt it in conjunction with CVE-2005-2914. |
| Buffer overflow in the system log viewer of Linksys BEFSX41 1.44.3 allows remote attackers to cause a denial of service via an HTTP request with a long Log_Page_Num variable. |
| ezconfig.asp in Linksys WRT54G router 3.01.03, 3.03.6, non-default configurations of 2.04.4, and possibly other versions, does not use an authentication initialization function, which allows remote attackers to obtain encrypted configuration information and, if the key is known, modify the configuration. |
| Linksys EtherFast BEFN2PS4, BEFSR41, and BEFSR81 Routers, and possibly other products, allow remote attackers to gain sensitive information and cause a denial of service via an SNMP query for the default community string "public," which causes the router to change its configuration and send SNMP trap information back to the system that initiated the query. |
| Linksys WRT54G router allows remote attackers to cause a denial of service (CPU consumption and server hang) via an HTTP POST request with a negative Content-Length value. |
| VPN Server module in Linksys EtherFast BEFVP41 Cable/DSL VPN Router before 1.40.1 reduces the key lengths for keys that are supplied via manual key entry, which makes it easier for attackers to crack the keys. |
| Buffer overflow in apply.cgi in Linksys WRT54G 3.01.03, 3.03.6, and possibly other versions before 4.20.7, allows remote attackers to execute arbitrary code via a long HTTP POST request. |
| The remote management web server for Linksys BEFSR41 EtherFast Cable/DSL Router before firmware 1.42.7 allows remote attackers to cause a denial of service (crash) via an HTTP request to Gozila.cgi without any arguments. |
| Unknown vulnerability in Linksys WRT54GS wireless router with firmware 4.50.6, with WPA Personal/TKIP authentication enabled, allows remote clients to bypass authentication by connecting without using encryption. |
| LinkSys EtherFast BEFSR41 Cable/DSL routers running firmware before 1.39.3 Beta allows a remote attacker to view administration and user passwords by connecting to the router and viewing the HTML source for (1) index.htm and (2) Password.htm. |
