| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: Avoid overwriting the copies of clcsock callback functions
The callback functions of clcsock will be saved and replaced during
the fallback. But if the fallback happens more than once, then the
copies of these callback functions will be overwritten incorrectly,
resulting in a loop call issue:
clcsk->sk_error_report
|- smc_fback_error_report() <------------------------------|
|- smc_fback_forward_wakeup() | (loop)
|- clcsock_callback() (incorrectly overwritten) |
|- smc->clcsk_error_report() ------------------|
So this patch fixes the issue by saving these function pointers only
once in the fallback and avoiding overwriting. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: avoid infinite loop to flush node pages
xfstests/generic/475 can give EIO all the time which give an infinite loop
to flush node page like below. Let's avoid it.
[16418.518551] Call Trace:
[16418.518553] ? dm_submit_bio+0x48/0x400
[16418.518574] ? submit_bio_checks+0x1ac/0x5a0
[16418.525207] __submit_bio+0x1a9/0x230
[16418.525210] ? kmem_cache_alloc+0x29e/0x3c0
[16418.525223] submit_bio_noacct+0xa8/0x2b0
[16418.525226] submit_bio+0x4d/0x130
[16418.525238] __submit_bio+0x49/0x310 [f2fs]
[16418.525339] ? bio_add_page+0x6a/0x90
[16418.525344] f2fs_submit_page_bio+0x134/0x1f0 [f2fs]
[16418.525365] read_node_page+0x125/0x1b0 [f2fs]
[16418.525388] __get_node_page.part.0+0x58/0x3f0 [f2fs]
[16418.525409] __get_node_page+0x2f/0x60 [f2fs]
[16418.525431] f2fs_get_dnode_of_data+0x423/0x860 [f2fs]
[16418.525452] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[16418.525458] ? __mod_memcg_state.part.0+0x2a/0x30
[16418.525465] ? __mod_memcg_lruvec_state+0x27/0x40
[16418.525467] ? __xa_set_mark+0x57/0x70
[16418.525472] f2fs_do_write_data_page+0x10e/0x7b0 [f2fs]
[16418.525493] f2fs_write_single_data_page+0x555/0x830 [f2fs]
[16418.525514] ? sysvec_apic_timer_interrupt+0x4e/0x90
[16418.525518] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[16418.525523] f2fs_write_cache_pages+0x303/0x880 [f2fs]
[16418.525545] ? blk_flush_plug_list+0x47/0x100
[16418.525548] f2fs_write_data_pages+0xfd/0x320 [f2fs]
[16418.525569] do_writepages+0xd5/0x210
[16418.525648] filemap_fdatawrite_wbc+0x7d/0xc0
[16418.525655] filemap_fdatawrite+0x50/0x70
[16418.525658] f2fs_sync_dirty_inodes+0xa4/0x230 [f2fs]
[16418.525679] f2fs_write_checkpoint+0x16d/0x1720 [f2fs]
[16418.525699] ? ttwu_do_wakeup+0x1c/0x160
[16418.525709] ? ttwu_do_activate+0x6d/0xd0
[16418.525711] ? __wait_for_common+0x11d/0x150
[16418.525715] kill_f2fs_super+0xca/0x100 [f2fs]
[16418.525733] deactivate_locked_super+0x3b/0xb0
[16418.525739] deactivate_super+0x40/0x50
[16418.525741] cleanup_mnt+0x139/0x190
[16418.525747] __cleanup_mnt+0x12/0x20
[16418.525749] task_work_run+0x6d/0xa0
[16418.525765] exit_to_user_mode_prepare+0x1ad/0x1b0
[16418.525771] syscall_exit_to_user_mode+0x27/0x50
[16418.525774] do_syscall_64+0x48/0xc0
[16418.525776] entry_SYSCALL_64_after_hwframe+0x44/0xae |
| A vulnerability was found in HobbesOSR Kitten up to c4f8b7c3158983d1020af432be1b417b28686736 and classified as critical. Affected by this issue is the function set_pte_at in the library /include/arch-arm64/pgtable.h. The manipulation leads to resource consumption. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. |
| hutool-core v5.8.23 was discovered to contain an infinite loop in the StrSplitter.splitByRegex function. This vulnerability allows attackers to cause a Denial of Service (DoS) via manipulation of the first two parameters. |
| RIOT is an open-source microcontroller operating system, designed to match the requirements of Internet of Things (IoT) devices and other embedded devices. A malicious actor can send a IEEE 802.15.4 packet with spoofed length byte and optionally spoofed FCS, which eventually results into an endless loop on a CC2538 as receiver. Before PR #20998, the receiver would check for the location of the CRC bit using the packet length byte by considering all 8 bits, instead of discarding bit 7, which is what the radio does. This then results into reading outside of the RX FIFO. Although it prints an error when attempting to read outside of the RX FIFO, it will continue doing this. This may lead to a discrepancy in the CRC check according to the firmware and the radio. If the CPU judges the CRC as correct and the radio is set to `AUTO_ACK`, when the packet requests and acknowledgment the CPU will go into the state `CC2538_STATE_TX_ACK`. However, if the radio judged the CRC as incorrect, it will not send an acknowledgment, and thus the `TXACKDONE` event will not fire. It will then never return to the state `CC2538_STATE_READY` since the baseband processing is still disabled. Then the CPU will be in an endless loop. Since setting to idle is not forced, it won't do it if the radio's state is not `CC2538_STATE_READY`. A fix has not yet been made. |
| A vulnerability has been identified in Teamcenter V12.4 (All versions < V12.4.0.15), Teamcenter V13.0 (All versions < V13.0.0.10), Teamcenter V13.1 (All versions < V13.1.0.10), Teamcenter V13.2 (All versions < V13.2.0.9), Teamcenter V13.3 (All versions < V13.3.0.5), Teamcenter V14.0 (All versions < V14.0.0.2). File Server Cache service in Teamcenter is vulnerable to denial of service by entering infinite loops and using up CPU cycles. This could allow an attacker to cause denial of service condition. |
| GeoServer is an open source server that allows users to share and edit geospatial data. Malicious Jiffle scripts can be executed by GeoServer, either as a rendering transformation in WMS dynamic styles or as a WPS process, that can enter an infinite loop to trigger denial of service. This vulnerability is fixed in 2.27.0, 2.26.3, and 2.25.7. This vulnerability can be mitigated by disabling WMS dynamic styling and the Jiffle process. |
| Cloudflare quiche was discovered to be vulnerable to an infinite loop when sending packets containing RETIRE_CONNECTION_ID frames.
QUIC connections possess a set of connection identifiers (IDs); see Section 5.1 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Once the QUIC handshake completes, a local endpoint is responsible for issuing and retiring Connection IDs that are used by the remote peer to populate the Destination Connection ID field in packets sent from remote to local. Each Connection ID has a sequence number to ensure synchronization between peers.
An unauthenticated remote attacker can exploit this vulnerability by first completing a handshake and then sending a specially-crafted set of frames that trigger a connection ID retirement in the victim. When the victim attempts to send a packet containing RETIRE_CONNECTION_ID frames, Section 19.16 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-19.6 requires that the sequence number of the retired connection ID must not be the same as the sequence number of the connection ID used by the packet. In other words, a packet cannot contain a frame that retires itself. In scenarios such as path migration, it is possible for there to be multiple active paths with different active connection IDs that could be used to retire each other. The exploit triggered an unintentional behaviour of a quiche design feature that supports retirement across paths while maintaining full connection ID synchronization, leading to an infinite loop.This issue affects quiche: from 0.15.0 before 0.24.5. |
| OctoPrint versions up until and including 1.11.1 contain a vulnerability that allows any unauthenticated attacker to send a manipulated broken multipart/form-data request to OctoPrint and through that make the web server component become unresponsive. The issue can be triggered by a broken multipart/form-data request lacking an end boundary to any of OctoPrint's endpoints implemented through the octoprint.server.util.tornado.UploadStorageFallbackHandler request handler. The request handler will get stuck in an endless busy loop, looking for a part of the request that will never come. As Tornado is single-threaded, that will effectively block the whole web server. The vulnerability has been patched in version 1.11.2. |
| Transient DOS while parsing IPv6 extension header when WLAN firmware receives an IPv6 packet that contains `IPPROTO_NONE` as the next header. |
| An issue has been discovered in GitLab CE/EE affecting all versions from 17.7 before 17.10.8, 17.11 before 17.11.4, and 18.0 before 18.0.2, allow an attacker to trigger an infinite redirect loop, potentially leading to a denial of service condition. |
| Silicon Labs Gecko OS DNS Response Processing Infinite Loop Denial-of-Service Vulnerability. This vulnerability allows network-adjacent attackers to create a denial-of-service condition on affected installations of Silicon Labs Gecko OS. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the processing of DNS responses. The issue results from a logic error that can lead to an infinite loop. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-23392. |
| 7-Zip CopyCoder Infinite Loop Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of 7-Zip. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the processing of streams. The issue results from a logic error that can lead to an infinite loop. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-24307. |
| The sequoia-openpgp crate 1.13.0 before 1.21.0 for Rust allows an infinite loop of "Reading a cert: Invalid operation: Not a Key packet" messages for RawCertParser operations that encounter an unsupported primary key type. |
| cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.20.1, cpp-httplib does not have a limit for a unique line, permitting an attacker to explore this to allocate memory arbitrarily. This vulnerability is fixed in 0.20.1. NOTE: This vulnerability is related to CVE-2025-53629. |
| An issue has been discovered in GitLab CE/EE affecting all versions starting from 15.0 prior to 17.5.5, from 17.6 prior to 17.6.3, and from 17.7 prior to 17.7.1. Under certain conditions, processing of CI artifacts metadata could cause background jobs to become unresponsive. |
| Due to a mistake in libcurl's WebSocket code, a malicious server can send a
particularly crafted packet which makes libcurl get trapped in an endless
busy-loop.
There is no other way for the application to escape or exit this loop other
than killing the thread/process.
This might be used to DoS libcurl-using application. |
| A Denial of Service (DoS) vulnerability in zenml-io/zenml version 0.66.0 allows unauthenticated attackers to cause excessive resource consumption by sending malformed multipart requests with arbitrary characters appended to the end of multipart boundaries. This flaw in the multipart request boundary processing mechanism leads to an infinite loop, resulting in a complete denial of service for all users. Affected endpoints include `/api/v1/login` and `/api/v1/device_authorization`. |
| Open Networking Foundation SD-RAN ONOS onos-ric-sdk-go 0.8.12 allows infinite repetition of the processing of an error (in the Subscribe function implementation for the subscribed indication stream). |
| Infinite Loop in zziplib v0.13.69 allows remote attackers to cause a denial of service via the return value "zzip_file_read" in the function "unzzip_cat_file". |
