| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: Fix an unsafe loop on the list
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the setting of the server responding flag
In afs_wait_for_operation(), we set transcribe the call responded flag to
the server record that we used after doing the fileserver iteration loop -
but it's possible to exit the loop having had a response from the server
that we've discarded (e.g. it returned an abort or we started receiving
data, but the call didn't complete).
This means that op->server might be NULL, but we don't check that before
attempting to set the server flag. |
| In the Linux kernel, the following vulnerability has been resolved:
r8169: add tally counter fields added with RTL8125
RTL8125 added fields to the tally counter, what may result in the chip
dma'ing these new fields to unallocated memory. Therefore make sure
that the allocated memory area is big enough to hold all of the
tally counter values, even if we use only parts of it. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix timer use-after-free on failed mount
Syzbot has found an ODEBUG bug in ext4_fill_super
The del_timer_sync function cancels the s_err_report timer,
which reminds about filesystem errors daily. We should
guarantee the timer is no longer active before kfree(sbi).
When filesystem mounting fails, the flow goes to failed_mount3,
where an error occurs when ext4_stop_mmpd is called, causing
a read I/O failure. This triggers the ext4_handle_error function
that ultimately re-arms the timer,
leaving the s_err_report timer active before kfree(sbi) is called.
Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix possible crash on mgmt_index_removed
If mgmt_index_removed is called while there are commands queued on
cmd_sync it could lead to crashes like the bellow trace:
0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc
0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth]
0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth]
0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth]
So while handling mgmt_index_removed this attempts to dequeue
commands passed as user_data to cmd_sync. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix uaf in l2cap_connect
[Syzbot reported]
BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54
CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci2 hci_rx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline]
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline]
l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825
l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514
hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline]
hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
...
Freed by task 5245:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579
poison_slab_object+0xf7/0x160 mm/kasan/common.c:240
__kasan_slab_free+0x32/0x50 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2256 [inline]
slab_free mm/slub.c:4477 [inline]
kfree+0x12a/0x3b0 mm/slub.c:4598
l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline]
kref_put include/linux/kref.h:65 [inline]
l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline]
l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802
l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241
hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline]
hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265
hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583
abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917
hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: avoid to add interface to list twice when SER
If SER L2 occurs during the WoWLAN resume flow, the add interface flow
is triggered by ieee80211_reconfig(). However, due to
rtw89_wow_resume() return failure, it will cause the add interface flow
to be executed again, resulting in a double add list and causing a kernel
panic. Therefore, we have added a check to prevent double adding of the
list.
list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:37!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W O 6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021
Workqueue: events_freezable ieee80211_restart_work [mac80211]
RIP: 0010:__list_add_valid_or_report+0x5e/0xb0
Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12
RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246
RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900
RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001
RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0
R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060
R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010
FS: 0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0
Call Trace:
<TASK>
? __die_body+0x1f/0x70
? die+0x3d/0x60
? do_trap+0xa4/0x110
? __list_add_valid_or_report+0x5e/0xb0
? do_error_trap+0x6d/0x90
? __list_add_valid_or_report+0x5e/0xb0
? handle_invalid_op+0x30/0x40
? __list_add_valid_or_report+0x5e/0xb0
? exc_invalid_op+0x3c/0x50
? asm_exc_invalid_op+0x16/0x20
? __list_add_valid_or_report+0x5e/0xb0
rtw89_ops_add_interface+0x309/0x310 [rtw89_core 7c32b1ee6854761c0321027c8a58c5160e41f48f]
drv_add_interface+0x5c/0x130 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
ieee80211_reconfig+0x241/0x13d0 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
? finish_wait+0x3e/0x90
? synchronize_rcu_expedited+0x174/0x260
? sync_rcu_exp_done_unlocked+0x50/0x50
? wake_bit_function+0x40/0x40
ieee80211_restart_work+0xf0/0x140 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
process_scheduled_works+0x1e5/0x480
worker_thread+0xea/0x1e0
kthread+0xdb/0x110
? move_linked_works+0x90/0x90
? kthread_associate_blkcg+0xa0/0xa0
ret_from_fork+0x3b/0x50
? kthread_associate_blkcg+0xa0/0xa0
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc rfcomm cmac uinput algif_hash algif_skcipher af_alg btusb btrtl iio_trig_hrtimer industrialio_sw_trigger btmtk industrialio_configfs btbcm btintel uvcvideo videobuf2_vmalloc iio_trig_sysfs videobuf2_memops videobuf2_v4l2 videobuf2_common uvc snd_hda_codec_hdmi veth snd_hda_intel snd_intel_dspcfg acpi_als snd_hda_codec industrialio_triggered_buffer kfifo_buf snd_hwdep industrialio i2c_piix4 snd_hda_core designware_i2s ip6table_nat snd_soc_max98357a xt_MASQUERADE xt_cgroup snd_soc_acp_rt5682_mach fuse rtw89_8922ae(O) rtw89_8922a(O) rtw89_pci(O) rtw89_core(O) 8021q mac80211(O) bluetooth ecdh_generic ecc cfg80211 r8152 mii joydev
gsmi: Log Shutdown Reason 0x03
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
It's observed that a crash occurs during hot-remove a memory device,
in which user is accessing the hugetlb. See calltrace as following:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 14045 at arch/x86/mm/fault.c:1278 do_user_addr_fault+0x2a0/0x790
Modules linked in: kmem device_dax cxl_mem cxl_pmem cxl_port cxl_pci dax_hmem dax_pmem nd_pmem cxl_acpi nd_btt cxl_core crc32c_intel nvme virtiofs fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc s
mirror dm_region_hash dm_log dm_mod
CPU: 1 PID: 14045 Comm: daxctl Not tainted 6.10.0-rc2-lizhijian+ #492
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:do_user_addr_fault+0x2a0/0x790
Code: 48 8b 00 a8 04 0f 84 b5 fe ff ff e9 1c ff ff ff 4c 89 e9 4c 89 e2 be 01 00 00 00 bf 02 00 00 00 e8 b5 ef 24 00 e9 42 fe ff ff <0f> 0b 48 83 c4 08 4c 89 ea 48 89 ee 4c 89 e7 5b 5d 41 5c 41 5d 41
RSP: 0000:ffffc90000a575f0 EFLAGS: 00010046
RAX: ffff88800c303600 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000001000 RSI: ffffffff82504162 RDI: ffffffff824b2c36
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a57658
R13: 0000000000001000 R14: ffff88800bc2e040 R15: 0000000000000000
FS: 00007f51cb57d880(0000) GS:ffff88807fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000001000 CR3: 00000000072e2004 CR4: 00000000001706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn+0x8d/0x190
? do_user_addr_fault+0x2a0/0x790
? report_bug+0x1c3/0x1d0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? do_user_addr_fault+0x2a0/0x790
? exc_page_fault+0x31/0x200
exc_page_fault+0x68/0x200
<...snip...>
BUG: unable to handle page fault for address: 0000000000001000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
---[ end trace 0000000000000000 ]---
BUG: unable to handle page fault for address: 0000000000001000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 14045 Comm: daxctl Kdump: loaded Tainted: G W 6.10.0-rc2-lizhijian+ #492
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dentry_name+0x1f4/0x440
<...snip...>
? dentry_name+0x2fa/0x440
vsnprintf+0x1f3/0x4f0
vprintk_store+0x23a/0x540
vprintk_emit+0x6d/0x330
_printk+0x58/0x80
dump_mapping+0x10b/0x1a0
? __pfx_free_object_rcu+0x10/0x10
__dump_page+0x26b/0x3e0
? vprintk_emit+0xe0/0x330
? _printk+0x58/0x80
? dump_page+0x17/0x50
dump_page+0x17/0x50
do_migrate_range+0x2f7/0x7f0
? do_migrate_range+0x42/0x7f0
? offline_pages+0x2f4/0x8c0
offline_pages+0x60a/0x8c0
memory_subsys_offline+0x9f/0x1c0
? lockdep_hardirqs_on+0x77/0x100
? _raw_spin_unlock_irqrestore+0x38/0x60
device_offline+0xe3/0x110
state_store+0x6e/0xc0
kernfs_fop_write_iter+0x143/0x200
vfs_write+0x39f/0x560
ksys_write+0x65/0xf0
do_syscall_64+0x62/0x130
Previously, some sanity check have been done in dump_mapping() before
the print facility parsing '%pd' though, it's still possible to run into
an invalid dentry.d_name.name.
Since dump_mapping() only needs to dump the filename only, retrieve it
by itself in a safer way to prevent an unnecessary crash.
Note that either retrieving the filename with '%pd' or
strncpy_from_kernel_nofault(), the filename could be unreliable. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix array out-of-bound access in SoC stats
Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a
maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx()
function access ath11k_soc_dp_stats::hal_reo_error using the REO
destination SRNG ring ID, which is incorrect. SRNG ring ID differ from
normal ring ID, and this usage leads to out-of-bounds array access. To fix
this issue, modify ath11k_dp_process_rx() to use the normal ring ID
directly instead of the SRNG ring ID to avoid out-of-bounds array access.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 19.503784] page dumped because: k
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: map the EBADMSG to nfserr_io to avoid warning
Ext4 will throw -EBADMSG through ext4_readdir when a checksum error
occurs, resulting in the following WARNING.
Fix it by mapping EBADMSG to nfserr_io.
nfsd_buffered_readdir
iterate_dir // -EBADMSG -74
ext4_readdir // .iterate_shared
ext4_dx_readdir
ext4_htree_fill_tree
htree_dirblock_to_tree
ext4_read_dirblock
__ext4_read_dirblock
ext4_dirblock_csum_verify
warn_no_space_for_csum
__warn_no_space_for_csum
return ERR_PTR(-EFSBADCRC) // -EBADMSG -74
nfserrno // WARNING
[ 161.115610] ------------[ cut here ]------------
[ 161.116465] nfsd: non-standard errno: -74
[ 161.117315] WARNING: CPU: 1 PID: 780 at fs/nfsd/nfsproc.c:878 nfserrno+0x9d/0xd0
[ 161.118596] Modules linked in:
[ 161.119243] CPU: 1 PID: 780 Comm: nfsd Not tainted 5.10.0-00014-g79679361fd5d #138
[ 161.120684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qe
mu.org 04/01/2014
[ 161.123601] RIP: 0010:nfserrno+0x9d/0xd0
[ 161.124676] Code: 0f 87 da 30 dd 00 83 e3 01 b8 00 00 00 05 75 d7 44 89 ee 48 c7 c7 c0 57 24 98 89 44 24 04 c6
05 ce 2b 61 03 01 e8 99 20 d8 00 <0f> 0b 8b 44 24 04 eb b5 4c 89 e6 48 c7 c7 a0 6d a4 99 e8 cc 15 33
[ 161.127797] RSP: 0018:ffffc90000e2f9c0 EFLAGS: 00010286
[ 161.128794] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 161.130089] RDX: 1ffff1103ee16f6d RSI: 0000000000000008 RDI: fffff520001c5f2a
[ 161.131379] RBP: 0000000000000022 R08: 0000000000000001 R09: ffff8881f70c1827
[ 161.132664] R10: ffffed103ee18304 R11: 0000000000000001 R12: 0000000000000021
[ 161.133949] R13: 00000000ffffffb6 R14: ffff8881317c0000 R15: ffffc90000e2fbd8
[ 161.135244] FS: 0000000000000000(0000) GS:ffff8881f7080000(0000) knlGS:0000000000000000
[ 161.136695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 161.137761] CR2: 00007fcaad70b348 CR3: 0000000144256006 CR4: 0000000000770ee0
[ 161.139041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 161.140291] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 161.141519] PKRU: 55555554
[ 161.142076] Call Trace:
[ 161.142575] ? __warn+0x9b/0x140
[ 161.143229] ? nfserrno+0x9d/0xd0
[ 161.143872] ? report_bug+0x125/0x150
[ 161.144595] ? handle_bug+0x41/0x90
[ 161.145284] ? exc_invalid_op+0x14/0x70
[ 161.146009] ? asm_exc_invalid_op+0x12/0x20
[ 161.146816] ? nfserrno+0x9d/0xd0
[ 161.147487] nfsd_buffered_readdir+0x28b/0x2b0
[ 161.148333] ? nfsd4_encode_dirent_fattr+0x380/0x380
[ 161.149258] ? nfsd_buffered_filldir+0xf0/0xf0
[ 161.150093] ? wait_for_concurrent_writes+0x170/0x170
[ 161.151004] ? generic_file_llseek_size+0x48/0x160
[ 161.151895] nfsd_readdir+0x132/0x190
[ 161.152606] ? nfsd4_encode_dirent_fattr+0x380/0x380
[ 161.153516] ? nfsd_unlink+0x380/0x380
[ 161.154256] ? override_creds+0x45/0x60
[ 161.155006] nfsd4_encode_readdir+0x21a/0x3d0
[ 161.155850] ? nfsd4_encode_readlink+0x210/0x210
[ 161.156731] ? write_bytes_to_xdr_buf+0x97/0xe0
[ 161.157598] ? __write_bytes_to_xdr_buf+0xd0/0xd0
[ 161.158494] ? lock_downgrade+0x90/0x90
[ 161.159232] ? nfs4svc_decode_voidarg+0x10/0x10
[ 161.160092] nfsd4_encode_operation+0x15a/0x440
[ 161.160959] nfsd4_proc_compound+0x718/0xe90
[ 161.161818] nfsd_dispatch+0x18e/0x2c0
[ 161.162586] svc_process_common+0x786/0xc50
[ 161.163403] ? nfsd_svc+0x380/0x380
[ 161.164137] ? svc_printk+0x160/0x160
[ 161.164846] ? svc_xprt_do_enqueue.part.0+0x365/0x380
[ 161.165808] ? nfsd_svc+0x380/0x380
[ 161.166523] ? rcu_is_watching+0x23/0x40
[ 161.167309] svc_process+0x1a5/0x200
[ 161.168019] nfsd+0x1f5/0x380
[ 161.168663] ? nfsd_shutdown_threads+0x260/0x260
[ 161.169554] kthread+0x1c4/0x210
[ 161.170224] ? kthread_insert_work_sanity_check+0x80/0x80
[ 161.171246] ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: sysfs: validate return type of _STR method
Only buffer objects are valid return values of _STR.
If something else is returned description_show() will access invalid
memory. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: unquiesce admin_q before destroy it
Kernel will hang on destroy admin_q while we create ctrl failed, such
as following calltrace:
PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme"
#0 [ff61d23de260fb78] __schedule at ffffffff8323bc15
#1 [ff61d23de260fc08] schedule at ffffffff8323c014
#2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1
#3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a
#4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006
#5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce
#6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced
#7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b
#8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362
#9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25
RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202
RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574
RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004
RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004
R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500
ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b
This due to we have quiesced admi_q before cancel requests, but forgot
to unquiesce before destroy it, as a result we fail to drain the
pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here
try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and
simplify the code. |
| In the Linux kernel, the following vulnerability has been resolved:
padata: use integer wrap around to prevent deadlock on seq_nr overflow
When submitting more than 2^32 padata objects to padata_do_serial, the
current sorting implementation incorrectly sorts padata objects with
overflowed seq_nr, causing them to be placed before existing objects in
the reorder list. This leads to a deadlock in the serialization process
as padata_find_next cannot match padata->seq_nr and pd->processed
because the padata instance with overflowed seq_nr will be selected
next.
To fix this, we use an unsigned integer wrap around to correctly sort
padata objects in scenarios with integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix possible UAF for bfqq->bic with merge chain
1) initial state, three tasks:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| Λ | Λ | Λ
| | | | | |
V | V | V |
bfqq1 bfqq2 bfqq3
process ref: 1 1 1
2) bfqq1 merged to bfqq2:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| | | Λ
\--------------\| | |
V V |
bfqq1--------->bfqq2 bfqq3
process ref: 0 2 1
3) bfqq2 merged to bfqq3:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
here -> Λ | |
\--------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3
process ref: 0 1 3
In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then
get bfqq3 through merge chain, and finially handle IO by bfqq3.
Howerver, current code will think bfqq2 is owned by BIC1, like initial
state, and set bfqq2->bic to BIC1.
bfq_insert_request
-> by Process 1
bfqq = bfq_init_rq(rq)
bfqq = bfq_get_bfqq_handle_split
bfqq = bic_to_bfqq
-> get bfqq2 from BIC1
bfqq->ref++
rq->elv.priv[0] = bic
rq->elv.priv[1] = bfqq
if (bfqq_process_refs(bfqq) == 1)
bfqq->bic = bic
-> record BIC1 to bfqq2
__bfq_insert_request
new_bfqq = bfq_setup_cooperator
-> get bfqq3 from bfqq2->new_bfqq
bfqq_request_freed(bfqq)
new_bfqq->ref++
rq->elv.priv[1] = new_bfqq
-> handle IO by bfqq3
Fix the problem by checking bfqq is from merge chain fist. And this
might fix a following problem reported by our syzkaller(unreproducible):
==================================================================
BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595
CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_requeue_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0x10d/0x610 mm/kasan/report.c:475
kasan_report+0x8e/0xc0 mm/kasan/report.c:588
bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757
bfq_init_rq block/bfq-iosched.c:6876 [inline]
bfq_insert_request block/bfq-iosched.c:6254 [inline]
bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304
blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593
blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
</TASK>
Allocated by task 20776:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3458 [inline]
kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503
ioc_create_icq block/blk-ioc.c:370 [inline]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lsm: Add check for BPF LSM return value
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: change the order of rate limits
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation. |
| In the Linux kernel, the following vulnerability has been resolved:
lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
If we need to increase the tree depth, allocate a new node, and then
race with another thread that increased the tree depth before us, we'll
still have a preallocated node that might be used later.
If we then use that node for a new non-root node, it'll still have a
pointer to the old root instead of being zeroed - fix this by zeroing it
in the cmpxchg failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: Fix uaf in __timer_delete_sync
There are two paths to access mptcp_pm_del_add_timer, result in a race
condition:
CPU1 CPU2
==== ====
net_rx_action
napi_poll netlink_sendmsg
__napi_poll netlink_unicast
process_backlog netlink_unicast_kernel
__netif_receive_skb genl_rcv
__netif_receive_skb_one_core netlink_rcv_skb
NF_HOOK genl_rcv_msg
ip_local_deliver_finish genl_family_rcv_msg
ip_protocol_deliver_rcu genl_family_rcv_msg_doit
tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit
tcp_v4_do_rcv mptcp_nl_remove_addrs_list
tcp_rcv_established mptcp_pm_remove_addrs_and_subflows
tcp_data_queue remove_anno_list_by_saddr
mptcp_incoming_options mptcp_pm_del_add_timer
mptcp_pm_del_add_timer kfree(entry)
In remove_anno_list_by_saddr(running on CPU2), after leaving the critical
zone protected by "pm.lock", the entry will be released, which leads to the
occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1).
Keeping a reference to add_timer inside the lock, and calling
sk_stop_timer_sync() with this reference, instead of "entry->add_timer".
Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock,
do not directly access any members of the entry outside the pm lock, which
can avoid similar "entry->x" uaf. |
| In the Linux kernel, the following vulnerability has been resolved:
sched: sch_cake: fix bulk flow accounting logic for host fairness
In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.
This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).
Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).
AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.
This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.
The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that. |
