| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc
pci_epf_alloc_doorbell() stores the allocated doorbell message array in
epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation
fails, the array is freed but the EPF state may still point to freed
memory.
Clear epf->db_msg and epf->num_db on the MSI allocation failure path so
that later cleanup cannot double-free the array and callers can retry
allocation.
Also return -EBUSY when doorbells have already been allocated to prevent
leaking or overwriting an existing allocation. |
| Heap-based buffer overflow in Windows DWM Core Library allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Numeric truncation error in Microsoft Office Word allows an unauthorized attacker to execute code locally. |
| Stack-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code locally. |
| Integer overflow or wraparound in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
| Integer overflow or wraparound in Microsoft Office allows an unauthorized attacker to execute code locally. |
| frp is a fast reverse proxy. From 0.53.0 until 0.70.1, frp's optional SSH Tunnel Gateway in pkg/ssh/server.go parses an SSH exec channel request by adding 4 to an attacker-controlled four-byte big-endian length. A length of 0xFFFFFFFF makes the uint32 addition wrap to 3, defeats the payload bounds check, and causes payload[4:3] to panic in TunnelServer.handleNewChannel. When no authorized-keys file is configured, sshConfig.NoClientAuth permits an unauthenticated peer to reach this channel phase before the frp token is checked, so a single five-byte request terminates the frps process and drops every active tunnel. This issue is fixed in version 0.70.1. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: smp: report dying CPU to RCU in stop_this_cpu()
smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function
marks the CPU offline for the scheduler via set_cpu_online(false) but
never informs RCU, so RCU keeps expecting a quiescent state from CPUs
that are now spinning forever with interrupts disabled.
As long as nothing waits for an RCU grace period after smp_send_stop()
this is harmless, which is why it went unnoticed. Since commit
91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
however, irq_work_sync() calls synchronize_rcu() on architectures without
an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns
false. That is the asm-generic default used by MIPS. Any irq_work_sync()
issued in the reboot/shutdown path after smp_send_stop() then blocks on
a grace period that can never complete, hanging the reboot:
WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on
...
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu: Offline CPU 1 blocking current GP.
rcu: Offline CPU 2 blocking current GP.
rcu: Offline CPU 3 blocking current GP.
This issue was noticed on several Realtek MIPS switch SoCs (MIPS
interAptiv) and came up during kernel bump downstream in OpenWrt from
6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable
branch. The patch also has been backported all the way back to 6.1.
Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the
generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs
and grace periods can still complete. MIPS shuts down all CPUs here
without going through the CPU-hotplug mechanism, so this report is not
otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug
offline path is not unprecedented: arm64 does the same in cpu_die_early().
There it is an exception for a CPU that was coming online and is aborting
bringup, rather than the default shutdown action as on MIPS. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
plist->length = le32_to_cpu(id->rd_msg->desc[0].len);
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: touchwin - reset the packet index on every complete packet
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a value the device
controls. A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.
Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mms114 - fix touch indexing for MMS134S and MMS136
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.
Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - bound the device-reported force-feedback effect index
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
rmi_f30_map_gpios() allocates gpioled_key_map with
min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f30_attention() iterates the full f30->gpioled_count (device query
register, range 0..31) and dereferences gpioled_key_map[i], and
input->keycodemax is set to the full gpioled_count while input->keycode
points at the 6-entry allocation.
A device that reports gpioled_count > 6 with GPIO support enabled
therefore causes an out-of-bounds read on the attention interrupt and
out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,
which bound the index only against keycodemax. This is the same defect
as the F3A handler, which was copied from F30.
Size the keymap for the full gpioled_count; the mapping loop still
assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. |
| is affected by an Improper Encoding or Escaping of Output vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain limited unauthorized write access, causing a limited disruption to availability. Exploitation of this issue does not require user interaction. |
| vLLM is an inference and serving engine for large language models. Prior to 0.27.0, an integer overflow in blockIdx.x * 2 * d in activation_kernels.cu can cause act_and_mul_kernel to consume another batched user's input, allowing a request processed in the same inference batch to receive a partial or complete copy of another user's inference result. This issue is fixed in version 0.27.0. |
| Heap-based buffer overflow in Windows SMB Client allows an authorized attacker to elevate privileges locally. |
