| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix dead lock for suspend and resume
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent. |
| curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: call ksmbd_vfs_kern_path_end_removing() on some error paths
There are two places where ksmbd_vfs_kern_path_end_removing() needs to be
called in order to balance what the corresponding successful call to
ksmbd_vfs_kern_path_start_removing() has done, i.e. drop inode locks and
put the taken references. Otherwise there might be potential deadlocks
and unbalanced locks which are caught like:
BUG: workqueue leaked lock or atomic: kworker/5:21/0x00000000/7596
last function: handle_ksmbd_work
2 locks held by kworker/5:21/7596:
#0: ffff8881051ae448 (sb_writers#3){.+.+}-{0:0}, at: ksmbd_vfs_kern_path_locked+0x142/0x660
#1: ffff888130e966c0 (&type->i_mutex_dir_key#3/1){+.+.}-{4:4}, at: ksmbd_vfs_kern_path_locked+0x17d/0x660
CPU: 5 PID: 7596 Comm: kworker/5:21 Not tainted 6.1.162-00456-gc29b353f383b #138
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x5b
process_one_work.cold+0x57/0x5c
worker_thread+0x82/0x600
kthread+0x153/0x190
ret_from_fork+0x22/0x30
</TASK>
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
In the mentioned "Fixes" commit, various work tasks triggering devlink
health reporter recovery were switched to use netdev_trylock to protect
against concurrent tear down of the channels being recovered. But this
had the side effect of introducing potential deadlocks because of
incorrect lock ordering.
The correct lock order is described by the init flow:
probe_one -> mlx5_init_one (acquires devlink lock)
-> mlx5_init_one_devl_locked -> mlx5_register_device
-> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe
-> register_netdev (acquires rtnl lock)
-> register_netdevice (acquires netdev lock)
=> devlink lock -> rtnl lock -> netdev lock.
But in the current recovery flow, the order is wrong:
mlx5e_tx_err_cqe_work (acquires netdev lock)
-> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report
-> devlink_health_report (acquires devlink lock => boom!)
-> devlink_health_reporter_recover
-> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx
-> mlx5e_tx_reporter_err_cqe_recover
The same pattern exists in:
mlx5e_reporter_rx_timeout
mlx5e_reporter_tx_ptpsq_unhealthy
mlx5e_reporter_tx_timeout
Fix these by moving the netdev_trylock calls from the work handlers
lower in the call stack, in the respective recovery functions, where
they are actually necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj()
ocelot_port_xmit_inj() calls ocelot_can_inject() and
ocelot_port_inject_frame() without holding the injection group lock.
Both functions contain lockdep_assert_held() for the injection lock,
and the correct caller felix_port_deferred_xmit() properly acquires
the lock using ocelot_lock_inj_grp() before calling these functions.
Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register
injection path to fix the missing lock protection. The FDMA path is not
affected as it uses its own locking mechanism. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix deadlock in ni_read_folio_cmpr
Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr).
This is caused by a lock inversion deadlock involving the inode mutex
(ni_lock) and page locks.
Scenario:
1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock.
2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in
the compressed frame (including page Y).
3. Concurrently, Task B (e.g., via readahead) has locked page Y and
calls ntfs_read_folio().
4. Task B waits for ni_lock (held by A).
5. Task A waits for page Y lock (held by B).
-> DEADLOCK.
The fix is to restructure locking: do not take ni_lock in ntfs_read_folio().
Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required
page locks for the frame have been successfully acquired. This restores the
correct lock ordering (Page Lock -> ni_lock) consistent with VFS.
[almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr] |
| Improper Authorization vulnerability in nerves-hub nerves_hub_web allows cross-organization device control via device bulk actions and device update API.
Missing authorization checks in the device bulk actions and device update API endpoints allow authenticated users to target devices belonging to other organizations and perform actions outside of their privilege level.
An attacker can select devices outside of their organization by manipulating device identifiers and perform management actions on them, such as moving them to products they control. This may allow attackers to interfere with firmware updates, access device functionality exposed by the platform, or disrupt device connectivity.
In environments where additional features such as remote console access are enabled, this could lead to full compromise of affected devices.
This issue affects nerves_hub_web: from 1.0.0 before 2.4.0. |
| Algernon is a small self-contained pure-Go web server. Prior to 1.17.7, the SSE event server bound to 0.0.0.0:5553 on Linux/macOS by default because the platform-dependent host default in engine/flags.go:39-46 set host = "" for non-Windows, and utils.JoinHostPort("", ":5553") resolves to ":5553". This vulnerability is fixed in 1.17.7. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: Avoid double-rtnl_lock ELP metric worker
batadv_v_elp_get_throughput() might be called when the RTNL lock is already
held. This could be problematic when the work queue item is cancelled via
cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case,
an rtnl_lock() would cause a deadlock.
To avoid this, rtnl_trylock() was used in this function to skip the
retrieval of the ethtool information in case the RTNL lock was already
held.
But for cfg80211 interfaces, batadv_get_real_netdev() was called - which
also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must
also be used instead and the lockless version __batadv_get_real_netdev()
has to be called. |
| Wine ships a .desktop file that registers itself as a MIME handler for EXE files and several other Windows executable file types. In some configurations, handling of an EXE file causes that file to be blindly executed with the permissions of the invoker. This allows escaping Flatpak and Snap sandboxes, because MIME handlers are not intended for use by code interpreters and loaders. NOTE: some parties feel that this is not a bug to be addressed in Wine, because there is no known solution that avoids a severe loss of usability (Wine could be a binfmt-misc handler, but binfmt-misc does not exist on all platforms supported by Wine). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix invalid wait context in ctx_sched_in()
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix deadlock in soft reset sequence
The soft reset sequence is currently executed from the threaded IRQ
handler, hence it cannot call disable_irq() which internally waits
for IRQ handlers, i.e. itself, to complete.
Use disable_irq_nosync() during a soft reset instead. |
| In Roundcube Webmail 1.6.x between 1.6.14 and 1.6.16 and 1.7.x before 1.7.1, remote image blocking was not honored for URLs pointing to local/private destinations, which may lead to information disclosure or privilege escalation via a text/html email message. |
| In Roundcube Webmail 1.6.x before 1.6.16 and 1.7.x before 1.7.1, the remote image blocking feature can be bypassed via a crafted CSS var() value in an e-mail message, which may lead to information disclosure or access-control bypass. |
| Roundcube Webmail 1.6.x before 1.6.16, and 1.7.x before 1.7.1 allows pre-authentication arbitrary file deletion via redis/memcache session poisoning bypass. |
| OpenClaw versions 2026.2.19 before 2026.3.31 contain an improper cache isolation vulnerability in the Zalo webhook replay-dedupe mechanism that is shared across authenticated webhook targets. Attackers controlling one authenticated Zalo webhook path in multi-account deployments can suppress legitimate events on different accounts by matching event_name and message_id parameters. |
| Exposure of Private Personal Information to an Unauthorized Actor vulnerability in Finex Media Competition Management System allows Retrieve Embedded Sensitive Data, Collect Data as Provided by Users.
This issue affects Competition Management System: before 23.07. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: Fix a hmm_range_fault() livelock / starvation problem
If hmm_range_fault() fails a folio_trylock() in do_swap_page,
trying to acquire the lock of a device-private folio for migration,
to ram, the function will spin until it succeeds grabbing the lock.
However, if the process holding the lock is depending on a work
item to be completed, which is scheduled on the same CPU as the
spinning hmm_range_fault(), that work item might be starved and
we end up in a livelock / starvation situation which is never
resolved.
This can happen, for example if the process holding the
device-private folio lock is stuck in
migrate_device_unmap()->lru_add_drain_all()
sinc lru_add_drain_all() requires a short work-item
to be run on all online cpus to complete.
A prerequisite for this to happen is:
a) Both zone device and system memory folios are considered in
migrate_device_unmap(), so that there is a reason to call
lru_add_drain_all() for a system memory folio while a
folio lock is held on a zone device folio.
b) The zone device folio has an initial mapcount > 1 which causes
at least one migration PTE entry insertion to be deferred to
try_to_migrate(), which can happen after the call to
lru_add_drain_all().
c) No or voluntary only preemption.
This all seems pretty unlikely to happen, but indeed is hit by
the "xe_exec_system_allocator" igt test.
Resolve this by waiting for the folio to be unlocked if the
folio_trylock() fails in do_swap_page().
Rename migration_entry_wait_on_locked() to
softleaf_entry_wait_unlock() and update its documentation to
indicate the new use-case.
Future code improvements might consider moving
the lru_add_drain_all() call in migrate_device_unmap() to be
called *after* all pages have migration entries inserted.
That would eliminate also b) above.
v2:
- Instead of a cond_resched() in hmm_range_fault(),
eliminate the problem by waiting for the folio to be unlocked
in do_swap_page() (Alistair Popple, Andrew Morton)
v3:
- Add a stub migration_entry_wait_on_locked() for the
!CONFIG_MIGRATION case. (Kernel Test Robot)
v4:
- Rename migrate_entry_wait_on_locked() to
softleaf_entry_wait_on_locked() and update docs (Alistair Popple)
v5:
- Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION
version of softleaf_entry_wait_on_locked().
- Modify wording around function names in the commit message
(Andrew Morton)
(cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215) |
