| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper session management in D-Link Wireless N 300 ADSL2+ Modem Router DSL-124 ME_1.00 allows attackers to execute a session hijacking attack via spoofing the IP address of an authenticated user. |
| A vulnerability classified as problematic has been found in gradio-app gradio up to 5.29.1. This affects the function is_valid_origin of the component CORS Handler. The manipulation of the argument localhost_aliases leads to erweiterte Rechte. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| libsignal-service-rs is a Rust version of the libsignal-service-java library which implements the core functionality to communicate with Signal servers. Prior to commit 82d70f6720e762898f34ae76b0894b0297d9b2f8, any contact may forge a sync message, impersonating another device of the local user. The origin of sync messages is not checked. Patched libsignal-service can be found after commit 82d70f6720e762898f34ae76b0894b0297d9b2f8. The `Metadata` struct contains an additional `was_encrypted` field, which breaks the API, but should be easily resolvable. No known workarounds are available. |
| Dovecot accepts dot LF DOT LF symbol as end of DATA command. RFC requires that it should always be CR LF DOT CR LF. This causes Dovecot to convert single mail with LF DOT LF in middle, into two emails when relaying to SMTP. Dovecot will split mail with LF DOT LF into two mails. Upgrade to latest released version. No publicly available exploits are known. |
| A vulnerability has been identified in SIMATIC RTLS Locating Manager (6GT2780-0DA00) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-0DA30) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA10) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA20) (All versions < V3.0.1.1), SIMATIC RTLS Locating Manager (6GT2780-1EA30) (All versions < V3.0.1.1). Affected components do not properly authenticate heartbeat messages. This could allow an unauthenticated remote attacker to affected the availability of secondary RTLS systems configured using a TeeRevProxy service and potentially cause loss of data generated during the time the attack is ongoing. |
| On Wear OS devices, when Google Messages is configured as the default SMS/MMS/RCS application, the handling of ACTION_SENDTO intents utilizing the sms:, smsto:, mms:, and mmsto: Uniform Resource Identifier (URI) schemes is incorrectly implemented.
Due to this misconfiguration, an attacker capable of invoking an Android intent can exploit this vulnerability to send messages on the user’s behalf to arbitrary receivers without requiring any further user interaction or specific permissions. This allows for the silent and unauthorized transmission of messages from a compromised Wear OS device. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| dnsjava is an implementation of DNS in Java. Records in DNS replies are not checked for their relevance to the query, allowing an attacker to respond with RRs from different zones. This vulnerability is fixed in 3.6.0. |
| Hickory DNS is a Rust based DNS client, server, and resolver. A vulnerability present starting in version 0.8.0 and prior to versions 0.24.3 and 0.25.0-alpha.5 impacts Hickory DNS users relying on DNSSEC verification in the client library, stub resolver, or recursive resolver. The DNSSEC validation routines treat entire RRsets of DNSKEY records as trusted once they have established trust in only one of the DNSKEYs. As a result, if a zone includes a DNSKEY with a public key that matches a configured trust anchor, all keys in that zone will be trusted to authenticate other records in the zone. There is a second variant of this vulnerability involving DS records, where an authenticated DS record covering one DNSKEY leads to trust in signatures made by an unrelated DNSKEY in the same zone. Versions 0.24.3 and 0.25.0-alpha.5 fix the issue. |
| Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. Prior to versions 0.25.3 and 0.26.3, by spoofing a webhook payload with a specific set of headers and body data, an attacker could transfer ownership of a repository and its repo level secrets to a separate repository. These secrets could be exfiltrated by follow up builds to the repository. Users with an enabled repository with access to repo level CI secrets in Vela are vulnerable to the exploit, and any user with access to the CI instance and the linked source control manager can perform the exploit. Versions 0.25.3 and 0.26.3 fix the issue. No known workarounds are available. |
| IPP software versions prior to v1.71 do not sufficiently verify the authenticity of data, in a
way that causes it to accept invalid data. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Insufficient data authenticity verification vulnerability in Janto, versions prior to r12. This allows an unauthenticated attacker to modify the content of emails sent to reset the password. To exploit the vulnerability, the attacker must create a POST request by injecting malicious content into the ‘Xml’ parameter on the ‘/public/cgi/Gateway.php’ endpoint. |
| React Router is a router for React. In versions on the 7.0 branch prior to version 7.5.2, it's possible to modify pre-rendered data by adding a header to the request. This allows to completely spoof its contents and modify all the values of the data object passed to the HTML. This issue has been patched in version 7.5.2. |
| An attacker who can execute arbitrary Operating Systems commands, can bypass code signing enforcements in the kernel, and execute arbitrary native code. This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 5.0.6, the fast-jwt library does not properly validate the iss claim based on the RFC 7519. The iss (issuer) claim validation within the fast-jwt library permits an array of strings as a valid iss value. This design flaw enables a potential attack where a malicious actor crafts a JWT with an iss claim structured as ['https://attacker-domain/', 'https://valid-iss']. Due to the permissive validation, the JWT will be deemed valid. Furthermore, if the application relies on external libraries like get-jwks that do not independently validate the iss claim, the attacker can leverage this vulnerability to forge a JWT that will be accepted by the victim application. Essentially, the attacker can insert their own domain into the iss array, alongside the legitimate issuer, and bypass the intended security checks. This issue is fixed in 5.0.6. |
| OpenFGA is a high-performance and flexible authorization/permission engine built for developers and inspired by Google Zanzibar. In versions prior to 1.13.1, under specific conditions, models using conditions with caching enabled can result in two different check requests producing the same cache key. This can result in OpenFGA reusing an earlier cached result for a different request. Users are affected if the model has relations which rely on condition evaluation andncaching is enabled. OpenFGA v1.13.1 contains a patch. |
| Insufficient verification of data authenticity in Windows App Installer allows an unauthorized attacker to perform spoofing over a network. |
| OpenClaw before 2026.3.22 contains a service discovery vulnerability where TXT metadata from Bonjour and DNS-SD could influence CLI routing even when actual service resolution failed. Attackers can exploit unresolved hints to steer routing decisions to unintended targets by providing malicious discovery metadata. |
