| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate compound request size before reading StructureSize2
When ksmbd validates a compound (chained) SMB2 request,
ksmbd_smb2_check_message() reads pdu->StructureSize2 without first
checking that the compound element is large enough to contain it.
StructureSize2 is a 2-byte field at offset 64
(__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element.
The compound-walking logic only guarantees that a full 64-byte SMB2
header is present for the trailing element: when NextCommand is 0, len is
reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A
remote client can craft a compound request whose last element has exactly
64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte
past the receive buffer, producing a slab-out-of-bounds read.
BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14
The buggy address is located 172 bytes inside of allocated 173-byte region
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402)
handle_ksmbd_work (fs/smb/server/server.c:119)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Reject any compound element that is too small to hold StructureSize2
before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: check skb_pull_data() return in gtp1u_send_echo_resp()
gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its
caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr +
gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For
a 16-19 byte echo request the pull fails and returns NULL without
advancing skb->data; execution continues, and the following skb_push()
plus the IP header pushed by iptunnel_xmit() move skb->data below
skb->head, tripping skb_under_panic().
Fix it by dropping the packet when skb_pull_data() fails.
skbuff: skb_under_panic: ...
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:2648)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82)
gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920)
udp_queue_rcv_one_skb (net/ipv4/udp.c:2388)
...
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix fils_discovery double free on alloc failure
ieee80211_set_fils_discovery() calls kfree_rcu() on the old template
before allocating the replacement. If the kzalloc() then fails, it
returns -ENOMEM while link->u.ap.fils_discovery still points at the
object already queued for freeing. A later update or AP teardown
(ieee80211_stop_ap()) re-queues that same rcu_head; the second free is
caught by KASAN when the RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800c065280 by task swapper/0/0
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-96 of size 96
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject free space cache with more entries than pages
When loading a v1 free space cache, __load_free_space_cache() takes
num_entries and num_bitmaps straight from the on-disk
btrfs_free_space_header. That header is stored in the tree_root under a key
with type 0, which the tree-checker has no case for, so neither count is
validated before the load trusts it.
The load loops num_entries times and maps the next page whenever the current
one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which
does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in
io_ctl_init() from the cache inode's i_size, not from num_entries:
num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);
So if num_entries claims more records than the pages can hold, io_ctl->index
runs off the end of pages[]. The write side never hits this because
io_ctl_add_entry() and io_ctl_add_bitmap() both stop once
io_ctl->index >= io_ctl->num_pages; the read side just never had the same
check.
To trigger it, take a clean cache (num_entries = <N> here), set num_entries
in the header to 0x10000, and fix up the leaf checksum so it still passes
the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and
pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read
65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the
array:
BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58
io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
__load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820)
load_free_space_cache (fs/btrfs/free-space-cache.c:1017)
caching_thread (fs/btrfs/block-group.c:880)
btrfs_work_helper (fs/btrfs/async-thread.c:312)
process_one_work
worker_thread
kthread
ret_from_fork
free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc()
at line 565, which is why that is the frame KASAN names. The out-of-bounds
slot is then treated as a struct page and handed to crc32c(), so the bad
read turns into a GP fault.
Add the missing check to io_ctl_check_crc(), which is where both the entry
loop and the bitmap loop end up. When num_entries is too large the load now
fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds
the free space from the extent tree, so a valid cache is never rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix two unsafe bare decodes in decode_lockers()
decode_lockers() in cls_lock_client.c contains two bare decode operations
that allow a malicious or compromised OSD to trigger slab-out-of-bounds
reads:
1. ceph_decode_32(p) at the num_lockers field has no preceding bounds
check. ceph_start_decoding() accepts struct_len=0 as valid -- the
internal ceph_decode_need(p, end, 0, bad) always passes -- so when an
OSD sends struct_len=0, ceph_start_decoding() returns success with
p == end. The immediately following bare ceph_decode_32(p) then reads
4 bytes past the validated buffer boundary. The garbage value is
passed directly to kzalloc_objs() as the locker count.
The sibling function decode_watchers() in osd_client.c already uses
ceph_decode_32_safe() after its own ceph_start_decoding() call.
decode_lockers() was the only site using the bare variant.
2. ceph_decode_8(p) after the decode_locker() loop has no preceding
bounds check. If an OSD crafts num_lockers such that the loop
advances p exactly to end, the subsequent bare ceph_decode_8(p) reads
one byte past the validated buffer boundary. The result is passed
directly into *type, which is used as a lock type discriminator by
callers, giving an OSD-controlled one-byte OOB read with direct
influence over the lock type field.
Fix both by replacing bare operations with their safe variants:
ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers,
err_inval)
ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type,
err_free_lockers)
The goto targets differ intentionally:
err_inval: is a new label returning -EINVAL directly. It is used for
the pre-allocation failure path where *lockers is not yet allocated
and must not be passed to ceph_free_lockers().
err_free_lockers: is the existing label. It is used for the
post-allocation failure path where *lockers is allocated and must
be freed.
ret is set to -EINVAL before ceph_decode_8_safe() so that
err_free_lockers returns the correct error code on bounds violation.
Without this, err_free_lockers would return a stale ret value (0 from
the successful decode_locker() loop), silently swallowing the error.
-EINVAL is correct for both failure paths. The data received from the
OSD is structurally malformed. -ENOMEM would misrepresent the failure
class to callers and to stable@ backporters triaging error paths.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition).
[ idryomov: trim changelog, formatting ] |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.2, the `/api/log` endpoint accepts unauthenticated POST requests, applies no schema validation to the message body, writes attacker-controlled content directly into the application's stdout log, interprets newline characters as real line breaks, and enforces no size or rate limits. Three independent abuse modes follow: log injection (forge log lines that look like legitimate system events), log volume DoS (saturate the logging pipeline at sustained 100+ requests per second of small messages), and oversized-payload submission (100 KB payloads accepted; larger sizes not tested). The most operationally damaging mode is log injection. An attacker can inject lines that an operator scanning logs would mistake for real system errors, mask their own activity behind fake noise, or pollute SIEM alerting rules with crafted false positives. A line such as `[error]: injected admin error` injected from an unauthenticated source is indistinguishable from the application's own error output once written to disk. Version 1.0.2 fixes the issue. |
| A vulnerability was found in MZ Automation libiec61850 up to 1.6.1. The affected element is the function deleteDataSetValuesShadowBuffer of the file src/iec61850/server/mms_mapping/reporting.c of the component URCB Revalidation. The manipulation results in use after free. The attack needs to be approached locally. The exploit has been made public and could be used. Upgrading to version 1.6.2 is sufficient to fix this issue. The patch is identified as 486fd57f3aed65bb9d636ff00f9ddce2e450b168. Upgrading the affected component is advised. |
| GitHub CLI (gh) is GitHub’s official command line tool. Prior to 2.97.0, gh attestation verify builds the certificate Subject Alternative Name matcher from the --signer-repo and --signer-workflow flag values without escaping regex metacharacters, so a user-supplied repository or workflow name is treated as a regular expression rather than a literal string. Because GitHub permits characters such as `.` in organization, repository, and workflow path names and `.` is a regex wildcard, an attacker can register a lookalike name (for example github/artifact.attestations-workflows) that satisfies a matcher intended for a different trusted signer (github/artifact-attestations-workflows), bypassing the intended Sigstore attestation verification. Exploitation requires the attacker to create a plausible lookalike repository and produce valid attestations from it, which could undermine supply chain verification for CI/CD pipelines or policy gates that pin trust to a specific signing workflow. This issue is fixed in version 2.97.0. |
| llama.cpp builds b1283 through b9058 contain an integer overflow vulnerability in the llama_batch_init() function where unchecked multiplications in malloc() calls can wrap past INT32_MAX when computing allocation sizes. Attackers can pass specially crafted parameters to trigger integer overflow, causing heap corruption and potentially achieving arbitrary code execution through subsequent batch operations that write past allocated buffer boundaries. |
| The DataPress (Dataverse Integration) WordPress plugin before 2.91 does not properly restrict access to its template rendering feature and exposes the viewing user's data to it, allowing users with a role as low as Contributor to disclose sensitive information, such as the session cookies of higher privileged users who view the affected content. |
| A buffer overflow in WatchGuard Fireware OS could may allow an authenticated remote attacker with privileged management access to execute arbitrary code with system privileges on the firewall.
This issue affects Fireware OS: from 11.9.6 through 12.10.3. |
| SonicWall Global VPN Client version 4.10.8.1108 and earlier is vulnerable to an out-of-bounds kernel memory read in the SWIPsec.sys driver, which could allow a local attacker to cause a system crash. |
| Imager versions from 0.45_02 before 1.034 for Perl may expose adjacent heap bytes via strlen() over-read from zero-count ASCII EXIF entries in copy_string_tags.
copy_string_tags() computes an ASCII EXIF tag's length as `entry->size - 1` to strip the trailing NUL. A zero-count ASCII entry sets `entry->size` to 0, and the derived length reaches i_tags_add() as -1, which is interpreted as a request to call strlen(), scanning past the entry to the next NUL and copying those bytes into the tag. JPEG reaches this path via im_decode_exif(), as does the separate Imager::File::WEBP distribution, which is fixed by upgrading Imager.
Any caller of Imager->read() on an attacker-supplied image with such an entry may receive an exif_* tag holding adjacent heap bytes instead of an empty string. |
| llama.cpp builds b5702 through b7653 contain an out-of-bounds read vulnerability in the recurrent memory state restore path that allows attackers with write access to the slot save directory to read memory past the end of the allocated cells array. Attackers can craft a malicious slot file with an oversized seq_id value to trigger an out-of-bounds read that leaks heap data including pointer values into server logs, defeating ASLR protections and facilitating further exploitation. |
| llama.cpp builds b4882 through b9058 contain a heap buffer overflow vulnerability in the KV cache state restore path where the state_read_data() function computes write size without overflow checking, allowing attackers with write access to the slot_save_path directory to corrupt heap memory. Attackers can craft malicious state files where cell_count multiplication overflows or exceeds tensor buffer allocation to write attacker-controlled bytes past buffer boundaries, potentially resulting in heap metadata corruption, model weight corruption, or arbitrary code execution via function pointer overwrite. |
| llama.cpp builds b3978 through b9058 contain an integer underflow and out-of-bounds read vulnerability in the DRY sampler that allows unauthenticated attackers to trigger a heap buffer underflow by sending a crafted HTTP request with dry_allowed_length set to INT32_MIN to the /v1/completions or /v1/chat/completions endpoints. Attackers can exploit this vulnerability to crash the server with SIGSEGV causing denial of service for all connected users, or corrupt token sampling probabilities by reading garbage values from memory before the allocated buffer. |
| llama.cpp builds b1886 through b7445 contain an integer overflow vulnerability in the LLaMA-Android JNI wrapper where the new_1batch() function multiplies sizeof(llama_seq_id) by an attacker-controlled n_seq_max parameter without overflow validation, causing heap buffer allocation to wrap and allocate insufficient memory. Attackers can exploit this by providing a crafted n_seq_max value through a malicious model file or JNI call to trigger heap corruption and achieve denial of service or arbitrary code execution on Android applications using the LLaMA-Android binding. |
| A regression exists in the Linux Kernel within KVM: nVMX that allowed for speculative execution attacks. L2 can carry out Spectre v2 attacks on L1 due to L1 thinking it doesn't need retpolines or IBPB after running L2 due to KVM (L0) advertising eIBRS support to L1. An attacker at L2 with code execution can execute code on an indirect branch on the host machine. We recommend upgrading to Kernel 6.2 or applying the relevant stable backports (v5.4.233, v5.10.170, v5.15.96, v6.1.14). |
| A maliciously crafted TIF file, when parsed through certain Autodesk products during image import, can cause an Out-of-Bounds Read in the image handling library. A malicious actor can leverage this vulnerability to cause a denial of service |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
