| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Fix random data corruption from exception handler
The current exception handler implementation, which assists when accessing
user space memory, may exhibit random data corruption if the compiler decides
to use a different register than the specified register %r29 (defined in
ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another
register, the fault handler will nevertheless store -EFAULT into %r29 and thus
trash whatever this register is used for.
Looking at the assembly I found that this happens sometimes in emulate_ldd().
To solve the issue, the easiest solution would be if it somehow is
possible to tell the fault handler which register is used to hold the error
code. Using %0 or %1 in the inline assembly is not posssible as it will show
up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not
convert to an integer.
This patch takes another, better and more flexible approach:
We extend the __ex_table (which is out of the execution path) by one 32-word.
In this word we tell the compiler to insert the assembler instruction
"or %r0,%r0,%reg", where %reg references the register which the compiler
choosed for the error return code.
In case of an access failure, the fault handler finds the __ex_table entry and
can examine the opcode. The used register is encoded in the lowest 5 bits, and
the fault handler can then store -EFAULT into this register.
Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT
config option any longer. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix data corruption in dsync block recovery for small block sizes
The helper function nilfs_recovery_copy_block() of
nilfs_recovery_dsync_blocks(), which recovers data from logs created by
data sync writes during a mount after an unclean shutdown, incorrectly
calculates the on-page offset when copying repair data to the file's page
cache. In environments where the block size is smaller than the page
size, this flaw can cause data corruption and leak uninitialized memory
bytes during the recovery process.
Fix these issues by correcting this byte offset calculation on the page. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Fix regression in writes when non-standard maximum write size negotiated
The conversion to netfs in the 6.3 kernel caused a regression when
maximum write size is set by the server to an unexpected value which is
not a multiple of 4096 (similarly if the user overrides the maximum
write size by setting mount parm "wsize", but sets it to a value that
is not a multiple of 4096). When negotiated write size is not a
multiple of 4096 the netfs code can skip the end of the final
page when doing large sequential writes, causing data corruption.
This section of code is being rewritten/removed due to a large
netfs change, but until that point (ie for the 6.3 kernel until now)
we can not support non-standard maximum write sizes.
Add a warning if a user specifies a wsize on mount that is not
a multiple of 4096 (and round down), also add a change where we
round down the maximum write size if the server negotiates a value
that is not a multiple of 4096 (we also have to check to make sure that
we do not round it down to zero). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Fix out-of-bounds memory access
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: handle isoc Babble and Buffer Overrun events properly
xHCI 4.9 explicitly forbids assuming that the xHC has released its
ownership of a multi-TRB TD when it reports an error on one of the
early TRBs. Yet the driver makes such assumption and releases the TD,
allowing the remaining TRBs to be freed or overwritten by new TDs.
The xHC should also report completion of the final TRB due to its IOC
flag being set by us, regardless of prior errors. This event cannot
be recognized if the TD has already been freed earlier, resulting in
"Transfer event TRB DMA ptr not part of current TD" error message.
Fix this by reusing the logic for processing isoc Transaction Errors.
This also handles hosts which fail to report the final completion.
Fix transfer length reporting on Babble errors. They may be caused by
device malfunction, no guarantee that the buffer has been filled. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: always filter entire AP matrix
The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or
domain is assigned to the mdev. The purpose of the function is to update
the guest's AP configuration by filtering the matrix of adapters and
domains assigned to the mdev. When an adapter or domain is assigned, only
the APQNs associated with the APID of the new adapter or APQI of the new
domain are inspected. If an APQN does not reference a queue device bound to
the vfio_ap device driver, then it's APID will be filtered from the mdev's
matrix when updating the guest's AP configuration.
Inspecting only the APID of the new adapter or APQI of the new domain will
result in passing AP queues through to a guest that are not bound to the
vfio_ap device driver under certain circumstances. Consider the following:
guest's AP configuration (all also assigned to the mdev's matrix):
14.0004
14.0005
14.0006
16.0004
16.0005
16.0006
unassign domain 4
unbind queue 16.0005
assign domain 4
When domain 4 is re-assigned, since only domain 4 will be inspected, the
APQNs that will be examined will be:
14.0004
16.0004
Since both of those APQNs reference queue devices that are bound to the
vfio_ap device driver, nothing will get filtered from the mdev's matrix
when updating the guest's AP configuration. Consequently, queue 16.0005
will get passed through despite not being bound to the driver. This
violates the linux device model requirement that a guest shall only be
given access to devices bound to the device driver facilitating their
pass-through.
To resolve this problem, every adapter and domain assigned to the mdev will
be inspected when filtering the mdev's matrix. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_tcam: Fix stack corruption
When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.
One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.
In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.
Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.
Add a test case to make sure the machine does not crash when this
condition is hit.
[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
dump_stack_lvl+0x36/0x50
panic+0x305/0x330
__stack_chk_fail+0x15/0x20
mlxsw_sp_acl_tcam_group_update+0x116/0x120
mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: Fix possible overflow condition in iomap_write_delalloc_scan
folio_next_index() returns an unsigned long value which left shifted
by PAGE_SHIFT could possibly cause an overflow on 32-bit system. Instead
use folio_pos(folio) + folio_size(folio), which does this correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[]. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
The function lio_target_nacl_info_show() uses sprintf() in a loop to print
details for every iSCSI connection in a session without checking for the
buffer length. With enough iSCSI connections it's possible to overflow the
buffer provided by configfs and corrupt the memory.
This patch replaces sprintf() with sysfs_emit_at() that checks for buffer
boundries. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a potential overflow in sctp_ifwdtsn_skip
Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only
checks the pos against the end of the chunk. However, the data left for
the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference
it as struct sctp_ifwdtsn_skip may cause coverflow.
This patch fixes it by checking the pos against "the end of the chunk -
sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to
sctp_fwdtsn_skip. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
Add iotype sanity check to avoid potential memory corruption.
This is to fix the compile error below:
fs/f2fs/iostat.c:231 __update_iostat_latency() error: buffer overflow
'io_lat->peak_lat[type]' 3 <= 3
vim +228 fs/f2fs/iostat.c
211 static inline void __update_iostat_latency(struct bio_iostat_ctx
*iostat_ctx,
212 enum iostat_lat_type type)
213 {
214 unsigned long ts_diff;
215 unsigned int page_type = iostat_ctx->type;
216 struct f2fs_sb_info *sbi = iostat_ctx->sbi;
217 struct iostat_lat_info *io_lat = sbi->iostat_io_lat;
218 unsigned long flags;
219
220 if (!sbi->iostat_enable)
221 return;
222
223 ts_diff = jiffies - iostat_ctx->submit_ts;
224 if (page_type >= META_FLUSH)
^^^^^^^^^^
225 page_type = META;
226
227 spin_lock_irqsave(&sbi->iostat_lat_lock, flags);
@228 io_lat->sum_lat[type][page_type] += ts_diff;
^^^^^^^^^
Mixup between META_FLUSH and NR_PAGE_TYPE leads to memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390/diag: fix racy access of physical cpu number in diag 9c handler
We do check for target CPU == -1, but this might change at the time we
are going to use it. Hold the physical target CPU in a local variable to
avoid out-of-bound accesses to the cpu arrays. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: possible buffer overflow
Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is
checked after access. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: wmi: Fix opening of char device
Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via
file private data"), the miscdevice stores a pointer to itself inside
filp->private_data, which means that private_data will not be NULL when
wmi_char_open() is called. This might cause memory corruption should
wmi_char_open() be unable to find its driver, something which can
happen when the associated WMI device is deleted in wmi_free_devices().
Fix the problem by using the miscdevice pointer to retrieve the WMI
device data associated with a char device using container_of(). This
also avoids wmi_char_open() picking a wrong WMI device bound to a
driver with the same name as the original driver. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix possible out-of-bound write in ath12k_wmi_ext_hal_reg_caps()
reg_cap.phy_id is extracted from WMI event and could be an unexpected value
in case some errors happen. As a result out-of-bound write may occur to
soc->hal_reg_cap. Fix it by validating reg_cap.phy_id before using it.
This is found during code review.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid data corruption caused by decline
We found a data corruption issue during testing of SMC-R on Redis
applications.
The benchmark has a low probability of reporting a strange error as
shown below.
"Error: Protocol error, got "\xe2" as reply type byte"
Finally, we found that the retrieved error data was as follows:
0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2
It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:
client server
¦ clc proposal
------------->
¦ clc accept
<-------------
¦ clc confirm
------------->
wait llc confirm
send llc confirm
¦failed llc confirm
¦ x------
(after 2s)timeout
wait llc confirm rsp
wait decline
(after 1s) timeout
(after 2s) timeout
¦ decline
-------------->
¦ decline
<--------------
As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.
This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).
This issue requires an immediate solution, since the protocol updates
involve a more long-term solution. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab out of bounds write in smb_inherit_dacl()
slab out-of-bounds write is caused by that offsets is bigger than pntsd
allocation size. This patch add the check to validate 3 offsets using
allocation size. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: s390/aes - Fix buffer overread in CTR mode
When processing the last block, the s390 ctr code will always read
a whole block, even if there isn't a whole block of data left. Fix
this by using the actual length left and copy it into a buffer first
for processing. |
