| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
igb: cope with large MAX_SKB_FRAGS
Sabrina reports that the igb driver does not cope well with large
MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload
corruption on TX.
An easy reproducer is to run ssh to connect to the machine. With
MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails. This has
been reported originally in
https://bugzilla.redhat.com/show_bug.cgi?id=2265320
The root cause of the issue is that the driver does not take into
account properly the (possibly large) shared info size when selecting
the ring layout, and will try to fit two packets inside the same 4K
page even when the 1st fraglist will trump over the 2nd head.
Address the issue by checking if 2K buffers are insufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
Check that all fields of a V2 algorithm header fit into the available
firmware data buffer.
The wmfw V2 format introduced variable-length strings in the algorithm
block header. This means the overall header length is variable, and the
position of most fields varies depending on the length of the string
fields. Each field must be checked to ensure that it does not overflow
the firmware data buffer.
As this ia bugfix patch, the fixes avoid making any significant change to
the existing code. This makes it easier to review and less likely to
introduce new bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()
memcpy() is called in a loop while 'operation->length' upper bound
is not checked and 'data_idx' also increments. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: mount fails with buffer overflow in strlen
Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an
ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the
trace below. Problem seems to be that strings for cluster stack and
cluster name are not guaranteed to be null terminated in the disk
representation, while strlcpy assumes that the source string is always
null terminated. This causes a read outside of the source string
triggering the buffer overflow detection.
detected buffer overflow in strlen
------------[ cut here ]------------
kernel BUG at lib/string.c:1149!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1
Debian 5.14.6-2
RIP: 0010:fortify_panic+0xf/0x11
...
Call Trace:
ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2]
ocfs2_fill_super+0x359/0x19b0 [ocfs2]
mount_bdev+0x185/0x1b0
legacy_get_tree+0x27/0x40
vfs_get_tree+0x25/0xb0
path_mount+0x454/0xa20
__x64_sys_mount+0x103/0x140
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
wl1251: Fix possible buffer overflow in wl1251_cmd_scan
Function wl1251_cmd_scan calls memcpy without checking the length.
Harden by checking the length is within the maximum allowed size. |
| Inappropriate implementation in XML in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| There is a heap buffer overflow vulnerability in some Hikvision cameras, which may allow unauthenticated attackers to cause device malfunction by sending specially crafted packets. |
| The hawkBit device management client in subsys/mgmt/hawkbit accumulates the body of an HTTP response from the update server into a heap buffer in response_json_cb() (subsys/mgmt/hawkbit/hawkbit.c). The buffer is sized to hold the received body bytes but reserves no space for a terminating NUL. When the full response has arrived, the code writes response_data[downloaded_size] = '\0' — and whenever the accumulated body length equals the allocation, that terminator lands one byte past the end of the heap object (a heap-based out-of-bounds write, CWE-122 / CWE-787).
The body length and fragmentation are taken directly from the parsed HTTP response (rsp->body_frag_start / rsp->body_frag_len) and are fully controlled by the remote hawkBit server, which chooses its own response length. The precise trigger depends on how the buffer grows, and both forms are remotely reachable. Since v4.0.0 the reallocation is sized to exactly downloaded_size + body_len, so any response body larger than the 1100-byte initial buffer makes the out-of-bounds write deterministic; such response sizes are normal for hawkBit deployment metadata. Before v4.0.0 the buffer grew by doubling and the growth check ((downloaded_size + body_len) > response_buffer_size) is false at equality, so a response body whose length is exactly the current allocation — 1100 bytes with the default initial buffer — skips the reallocation entirely and writes the terminator at response_data[1100] of an 1100-byte object. The HTTP length-mismatch check does not catch this, because the declared and received lengths genuinely agree. Either form is reachable by a malicious, compromised, or man-in-the-middle update server (TLS is optional and, when enabled, does not protect against a hostile server), with no authentication of response content and no client-side length cap protecting the write.
The out-of-bounds write is a fixed single NUL byte immediately following the allocation, corrupting adjacent allocator metadata or the next allocation. The practical impact is heap corruption leading to denial of service (fault on a subsequent allocation or free), with the bounded, allocator-dependent possibility of further corruption. The fix sizes the buffer to the body length plus one and copies with memcpy, ensuring the terminator always lands within the allocation. |
| In wlan AP driver, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00489200; Issue ID: MSV-7834. |
| In Audio HAL, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10960023 (Note: For MT6880, MT6890, MT6980D, MT6988, MT6990) / AUTO00851189 (Note: For MT2735, MT3737); Issue ID: MSV-7586. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6. Processing a maliciously crafted image may corrupt process memory. |
| A vulnerability was detected in GL.iNet MT3000, MT6000, BE9300, BE3600, MT3600BE, E5800, BE6500, MT5000, X3000, XE3000 and MT2500 up to 20260707. The affected element is the function nas-web.get_file_list of the component APPS-NAS Module. Performing a manipulation results in heap-based buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| FreeRDP Windows client before 3.29.0 contains a heap buffer overflow vulnerability in the clipboard virtual channel when processing CLIPRDR_FILE_CONTENTS_RESPONSE PDUs without validating the server-provided size against the destination buffer. A malicious RDP server can send a response with a data payload significantly larger than requested, causing arbitrary heap memory corruption that may enable remote code execution when a user performs a paste operation. |
| A flaw was found in libtiff. A remote attacker could exploit this vulnerability by providing a specially crafted PixarLog-compressed TIFF image. This issue occurs when decoding Pixarlog codec images with the PIXARLOGDATAFMT_8BITABGR output format and a specific stride value, leading to a heap-based buffer overflow. This could potentially result in arbitrary code execution or a denial of service (DoS). |
| FreeRDP before 3.29.0 contains integer overflow vulnerabilities in the audio input redirection channel (audin) across ALSA, sndio, WinMM, and OpenSL ES backends that fail to validate the FramesPerPacket parameter from RDP servers. Attackers can supply a malicious FramesPerPacket value causing allocation size wraparound, resulting in heap-based buffer overflow on ALSA or denial of service on all platforms. |
| A heap buffer overflow vulnerability was found in GStreamer's librfb (RFB/VNC client). The rectangle bounds check incorrectly validates area rather than individual dimensions, allowing a malicious VNC server to send a rectangle that extends beyond the framebuffer. A remote attacker could set up a malicious VNC server and trick a user into connecting, resulting in an out-of-bounds heap write that could lead to code execution or a crash. |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. |
| Heap buffer overflow in Chromecast in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Insufficient data validation in Storage in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| In Telephony, there is a possible memory corruption due to a heap buffer overflow. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11006447; Issue ID: MSV-7871. |
