| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: Set SOCK_RCU_FREE
Bind lookup runs under RCU, so ensure that a socket doesn't go away in
the middle of a lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix dangling pointer in krb_authenticate
krb_authenticate frees sess->user and does not set the pointer
to NULL. It calls ksmbd_krb5_authenticate to reinitialise
sess->user but that function may return without doing so. If
that happens then smb2_sess_setup, which calls krb_authenticate,
will be accessing free'd memory when it later uses sess->user. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: separate no-async decryption request handling from async
If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.
We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916f3 ("tls: fix race between
async notify and socket close") took care of it.
This will make the next fix easier. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ipv6: release expired exception dst cached in socket
Dst objects get leaked in ip6_negative_advice() when this function is
executed for an expired IPv6 route located in the exception table. There
are several conditions that must be fulfilled for the leak to occur:
* an ICMPv6 packet indicating a change of the MTU for the path is received,
resulting in an exception dst being created
* a TCP connection that uses the exception dst for routing packets must
start timing out so that TCP begins retransmissions
* after the exception dst expires, the FIB6 garbage collector must not run
before TCP executes ip6_negative_advice() for the expired exception dst
When TCP executes ip6_negative_advice() for an exception dst that has
expired and if no other socket holds a reference to the exception dst, the
refcount of the exception dst is 2, which corresponds to the increment
made by dst_init() and the increment made by the TCP socket for which the
connection is timing out. The refcount made by the socket is never
released. The refcount of the dst is decremented in sk_dst_reset() but
that decrement is counteracted by a dst_hold() intentionally placed just
before the sk_dst_reset() in ip6_negative_advice(). After
ip6_negative_advice() has finished, there is no other object tied to the
dst. The socket lost its reference stored in sk_dst_cache and the dst is
no longer in the exception table. The exception dst becomes a leaked
object.
As a result of this dst leak, an unbalanced refcount is reported for the
loopback device of a net namespace being destroyed under kernels that do
not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"):
unregister_netdevice: waiting for lo to become free. Usage count = 2
Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The
patch that introduced the dst_hold() in ip6_negative_advice() was
92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22
merely refactored the code with regards to the dst refcount so the issue
was present even before 92f1655aa2b22. The bug was introduced in
54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually
expired.") where the expired cached route is deleted and the sk_dst_cache
member of the socket is set to NULL by calling dst_negative_advice() but
the refcount belonging to the socket is left unbalanced.
The IPv4 version - ipv4_negative_advice() - is not affected by this bug.
When the TCP connection times out ipv4_negative_advice() merely resets the
sk_dst_cache of the socket while decrementing the refcount of the
exception dst. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix buffer overflow when parsing NFS reparse points
ReparseDataLength is sum of the InodeType size and DataBuffer size.
So to get DataBuffer size it is needed to subtract InodeType's size from
ReparseDataLength.
Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer
at position after the end of the buffer because it does not subtract
InodeType size from the length. Fix this problem and correctly subtract
variable len.
Member InodeType is present only when reparse buffer is large enough. Check
for ReparseDataLength before accessing InodeType to prevent another invalid
memory access.
Major and minor rdev values are present also only when reparse buffer is
large enough. Check for reparse buffer size before calling reparse_mkdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix timer use-after-free on failed mount
Syzbot has found an ODEBUG bug in ext4_fill_super
The del_timer_sync function cancels the s_err_report timer,
which reminds about filesystem errors daily. We should
guarantee the timer is no longer active before kfree(sbi).
When filesystem mounting fails, the flow goes to failed_mount3,
where an error occurs when ext4_stop_mmpd is called, causing
a read I/O failure. This triggers the ext4_handle_error function
that ultimately re-arms the timer,
leaving the s_err_report timer active before kfree(sbi) is called.
Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix uaf in l2cap_connect
[Syzbot reported]
BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54
CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci2 hci_rx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline]
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline]
l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825
l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514
hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline]
hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
...
Freed by task 5245:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579
poison_slab_object+0xf7/0x160 mm/kasan/common.c:240
__kasan_slab_free+0x32/0x50 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2256 [inline]
slab_free mm/slub.c:4477 [inline]
kfree+0x12a/0x3b0 mm/slub.c:4598
l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline]
kref_put include/linux/kref.h:65 [inline]
l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline]
l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802
l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241
hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline]
hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265
hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583
abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917
hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328
process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
process_scheduled_works kernel/workqueue.c:3312 [inline]
worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix index out of bounds in degamma hardware format translation
Fixes index out of bounds issue in
`cm_helper_translate_curve_to_degamma_hw_format` function. The issue
could occur when the index 'i' exceeds the number of transfer function
points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/qm - inject error before stopping queue
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in ip6_finish_output2()
If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.
We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: remove warn in gue_gro_receive on unsupported protocol
Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is
not known or does not have a GRO handler.
Such a packet is easily constructed. Syzbot generates them and sets
off this warning.
Remove the warning as it is expected and not actionable.
The warning was previously reduced from WARN_ON to WARN_ON_ONCE in
commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad
proto callbacks"). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: avoid double free special payload
If a discard request needs to be retried, and that retry may fail before
a new special payload is added, a double free will result. Clear the
RQF_SPECIAL_LOAD when the request is cleaned. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/9p: only translate RWX permissions for plain 9P2000
Garbage in plain 9P2000's perm bits is allowed through, which causes it
to be able to set (among others) the suid bit. This was presumably not
the intent since the unix extended bits are handled explicitly and
conditionally on .u. |
| In the Linux kernel, the following vulnerability has been resolved:
nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment().
syzbot triggered various splats (see [0] and links) by a crafted GSO
packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols:
ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP
NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner
protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls
skb_mac_gso_segment() to invoke inner protocol GSO handlers.
nsh_gso_segment() does the following for the original skb before
calling skb_mac_gso_segment()
1. reset skb->network_header
2. save the original skb->{mac_heaeder,mac_len} in a local variable
3. pull the NSH header
4. resets skb->mac_header
5. set up skb->mac_len and skb->protocol for the inner protocol.
and does the following for the segmented skb
6. set ntohs(ETH_P_NSH) to skb->protocol
7. push the NSH header
8. restore skb->mac_header
9. set skb->mac_header + mac_len to skb->network_header
10. restore skb->mac_len
There are two problems in 6-7 and 8-9.
(a)
After 6 & 7, skb->data points to the NSH header, so the outer header
(ETH_P_8021AD in this case) is stripped when skb is sent out of netdev.
Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH),
skb_pull() in the first nsh_gso_segment() will make skb->data point
to the middle of the outer NSH or Ethernet header because the Ethernet
header is not pulled by the second nsh_gso_segment().
(b)
While restoring skb->{mac_header,network_header} in 8 & 9,
nsh_gso_segment() does not assume that the data in the linear
buffer is shifted.
However, udp6_ufo_fragment() could shift the data and change
skb->mac_header accordingly as demonstrated by syzbot.
If this happens, even the restored skb->mac_header points to
the middle of the outer header.
It seems nsh_gso_segment() has never worked with outer headers so far.
At the end of nsh_gso_segment(), the outer header must be restored for
the segmented skb, instead of the NSH header.
To do that, let's calculate the outer header position relatively from
the inner header and set skb->{data,mac_header,protocol} properly.
[0]:
BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline]
ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668
ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222
__netdev_start_xmit include/linux/netdevice.h:4989 [inline]
netdev_start_xmit include/linux/netdevice.h:5003 [inline]
xmit_one net/core/dev.c:3547 [inline]
dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563
__dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351
dev_queue_xmit include/linux/netdevice.h:3171 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3819 [inline]
slab_alloc_node mm/slub.c:3860 [inline]
__do_kmalloc_node mm/slub.c:3980 [inline]
__kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001
kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
__
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: core: reject skb_copy(_expand) for fraglist GSO skbs
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment. |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
VMBus code could free decrypted pages if set_memory_encrypted()/decrypted()
fails. Leak the pages if this happens. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix UAF in error path
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:
BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034
CPU: 1 PID: 8034 Comm: poc Not tainted 6.8.2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.0-debian-1.16.0-5 04/01/2014
Call Trace:
<IRQ>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0xd9/0x1b0 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:377
print_report+0xc4/0x620 linux/mm/kasan/report.c:488
kasan_report+0xda/0x110 linux/mm/kasan/report.c:601
kfree_skb_list_reason+0x47e/0x4c0 linux/net/core/skbuff.c:1183
skb_release_data+0x5af/0x880 linux/net/core/skbuff.c:1026
skb_release_all linux/net/core/skbuff.c:1094
__kfree_skb linux/net/core/skbuff.c:1108
kfree_skb_reason+0x12d/0x210 linux/net/core/skbuff.c:1144
kfree_skb linux/./include/linux/skbuff.h:1244
tipc_buf_append+0x425/0xb50 linux/net/tipc/msg.c:186
tipc_link_input+0x224/0x7c0 linux/net/tipc/link.c:1324
tipc_link_rcv+0x76e/0x2d70 linux/net/tipc/link.c:1824
tipc_rcv+0x45f/0x10f0 linux/net/tipc/node.c:2159
tipc_udp_recv+0x73b/0x8f0 linux/net/tipc/udp_media.c:390
udp_queue_rcv_one_skb+0xad2/0x1850 linux/net/ipv4/udp.c:2108
udp_queue_rcv_skb+0x131/0xb00 linux/net/ipv4/udp.c:2186
udp_unicast_rcv_skb+0x165/0x3b0 linux/net/ipv4/udp.c:2346
__udp4_lib_rcv+0x2594/0x3400 linux/net/ipv4/udp.c:2422
ip_protocol_deliver_rcu+0x30c/0x4e0 linux/net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2e4/0x520 linux/net/ipv4/ip_input.c:233
NF_HOOK linux/./include/linux/netfilter.h:314
NF_HOOK linux/./include/linux/netfilter.h:308
ip_local_deliver+0x18e/0x1f0 linux/net/ipv4/ip_input.c:254
dst_input linux/./include/net/dst.h:461
ip_rcv_finish linux/net/ipv4/ip_input.c:449
NF_HOOK linux/./include/linux/netfilter.h:314
NF_HOOK linux/./include/linux/netfilter.h:308
ip_rcv+0x2c5/0x5d0 linux/net/ipv4/ip_input.c:569
__netif_receive_skb_one_core+0x199/0x1e0 linux/net/core/dev.c:5534
__netif_receive_skb+0x1f/0x1c0 linux/net/core/dev.c:5648
process_backlog+0x101/0x6b0 linux/net/core/dev.c:5976
__napi_poll.constprop.0+0xba/0x550 linux/net/core/dev.c:6576
napi_poll linux/net/core/dev.c:6645
net_rx_action+0x95a/0xe90 linux/net/core/dev.c:6781
__do_softirq+0x21f/0x8e7 linux/kernel/softirq.c:553
do_softirq linux/kernel/softirq.c:454
do_softirq+0xb2/0xf0 linux/kernel/softirq.c:441
</IRQ>
<TASK>
__local_bh_enable_ip+0x100/0x120 linux/kernel/softirq.c:381
local_bh_enable linux/./include/linux/bottom_half.h:33
rcu_read_unlock_bh linux/./include/linux/rcupdate.h:851
__dev_queue_xmit+0x871/0x3ee0 linux/net/core/dev.c:4378
dev_queue_xmit linux/./include/linux/netdevice.h:3169
neigh_hh_output linux/./include/net/neighbour.h:526
neigh_output linux/./include/net/neighbour.h:540
ip_finish_output2+0x169f/0x2550 linux/net/ipv4/ip_output.c:235
__ip_finish_output linux/net/ipv4/ip_output.c:313
__ip_finish_output+0x49e/0x950 linux/net/ipv4/ip_output.c:295
ip_finish_output+0x31/0x310 linux/net/ipv4/ip_output.c:323
NF_HOOK_COND linux/./include/linux/netfilter.h:303
ip_output+0x13b/0x2a0 linux/net/ipv4/ip_output.c:433
dst_output linux/./include/net/dst.h:451
ip_local_out linux/net/ipv4/ip_output.c:129
ip_send_skb+0x3e5/0x560 linux/net/ipv4/ip_output.c:1492
udp_send_skb+0x73f/0x1530 linux/net/ipv4/udp.c:963
udp_sendmsg+0x1a36/0x2b40 linux/net/ipv4/udp.c:1250
inet_sendmsg+0x105/0x140 linux/net/ipv4/af_inet.c:850
sock_sendmsg_nosec linux/net/socket.c:730
__sock_sendmsg linux/net/socket.c:745
__sys_sendto+0x42c/0x4e0 linux/net/socket.c:2191
__do_sys_sendto linux/net/socket.c:2203
__se_sys_sendto linux/net/socket.c:2199
__x64_sys_sendto+0xe0/0x1c0 linux/net/socket.c:2199
do_syscall_x64 linux/arch/x86/entry/common.c:52
do_syscall_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix out-of-bounds access in ops_init
net_alloc_generic is called by net_alloc, which is called without any
locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It
is read twice, first to allocate an array, then to set s.len, which is
later used to limit the bounds of the array access.
It is possible that the array is allocated and another thread is
registering a new pernet ops, increments max_gen_ptrs, which is then used
to set s.len with a larger than allocated length for the variable array.
Fix it by reading max_gen_ptrs only once in net_alloc_generic. If
max_gen_ptrs is later incremented, it will be caught in net_assign_generic. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: fix vf may be used uninitialized in this function warning
To fix the regression introduced by commit 52424f974bc5, which causes
servers hang in very hard to reproduce conditions with resets races.
Using two sources for the information is the root cause.
In this function before the fix bumping v didn't mean bumping vf
pointer. But the code used this variables interchangeably, so stale vf
could point to different/not intended vf.
Remove redundant "v" variable and iterate via single VF pointer across
whole function instead to guarantee VF pointer validity. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_acl_tcam: Fix warning during rehash
As previously explained, the rehash delayed work migrates filters from
one region to another. This is done by iterating over all chunks (all
the filters with the same priority) in the region and in each chunk
iterating over all the filters.
When the work runs out of credits it stores the current chunk and entry
as markers in the per-work context so that it would know where to resume
the migration from the next time the work is scheduled.
Upon error, the chunk marker is reset to NULL, but without resetting the
entry markers despite being relative to it. This can result in migration
being resumed from an entry that does not belong to the chunk being
migrated. In turn, this will eventually lead to a chunk being iterated
over as if it is an entry. Because of how the two structures happen to
be defined, this does not lead to KASAN splats, but to warnings such as
[1].
Fix by creating a helper that resets all the markers and call it from
all the places the currently only reset the chunk marker. For good
measures also call it when starting a completely new rehash. Add a
warning to avoid future cases.
[1]
WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0
Modules linked in:
CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:mlxsw_afk_encode+0x242/0x2f0
[...]
Call Trace:
<TASK>
mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290
mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470
process_one_work+0x151/0x370
worker_thread+0x2cb/0x3e0
kthread+0xd0/0x100
ret_from_fork+0x34/0x50
</TASK> |
